MacBook Pro :: Using MBP Display As Video Output Xbox 360
Aug 10, 2010
I've got quite a simple question about an MBP and an Xbox 360, which I'm sure some have asked and others have answered before, but I'm looking for a straight-forward response given the situation I find myself into. So I've got the two devices, and I'd like to use the MBP's display as a video output for the 360. What I've also got is a VGA adapter for the 360, so I could connect it to a monitor instead of a TV. So basically, is this achievable, and if it is, what else do I need, in case I need anything else? Sorry for the improper way of writing this message, but all I have is an HTC Desire, and I find it quite difficult to type very well.
I have done a ton of searching and still haven't found the answer I am looking for (besides a possible future product by Belkin). It can't be as simple as a HDMI to MDP adaptor can it?
I have a MacBookPro, model: A 1278 (Mid-2010 13"). Is its mini-display port capable of delivering both video and audio output to a HDMI adapter? or just video output only?
Info: MacBook Pro, Mac OS X (10.6.8), Model No: A1278 (Mid-2010 13")
I am currently using Vuze to stream movies on my MBP i7 to my Xbox 360. Well, lately its been creating rebuffing and etc making the video experience a bit dreadful. I am looking for a decent solution in converting my videos so I can throw them all on a drive and directly connect with my Xbox 360.
it would be possible to use my retina display as a screen for my xbox 360. Im not sure if the hdmi port supports video input or if this is a possibility.
Info: MacBook Pro with Retina display, Mac OS X (10.7.4)
Say I set up my xbox with a component to minidisplay port adapter and plugged the mini display port into my macbook pro 13 inch, could i use the moniter as a dsplay for my xbox. I currently don't have an hd tv in my dorm and i like the display on my macbook and would like to use it. Also, would it be possible to buy something like an hdmi to firewire 800 and then use the firewire port on my macbook for the video in. Even though the mini displayport is an output, will it make a difference. I am also interested in buying a capture device and using that with the usb port on my mac, but i have heard that the latancy is really bad and you don't get to play at the full resolution.
I'm having a problem that when I put my macbook pro to the television I have to use different resolutions (1080p) on television. This way applications such as plex can't perform like they should.
Is there a way that I can (just as in Windows) use the television as the main and only monitor?
I have a Macbook with a GMA 950 video card, so the S-Video/Video out should work. I bought a mini-DVI to S-Video adapter, then tried connecting both S-Video, as well as composite cables to my television.
The Macbook detects the adapter (NTSC/PAL shows up in Display Preferences), but the television receives no signal. I've tested the television's input using another device and it's fine.
So there seem to be two possibilities:
I have a shoddy adapter. (I'm hoping this isn't true, because it's a pain to return. It is, however, brand new)
There is something wrong on the software end. Any suggestions?
I'm running Tiger 10.4.11. I'm unsure of the exact purchase date, but it's a Core Duo 1.8, so it should be around 2007.
Edit: SOLVED. I had to switch the setting from PAL to NTSC. Once I did that, it seems to now work with the composite cable. That said, it DOES not work with S-Video. This may be because my S-Video cable is shoddy or the port for the adapter does not work. That said, everything seems okay, now.
I am running video from my MacBook to my widescreen tv via a VGA cable. I cannot get any video settings to work that show the video in widescreen format. Everything I select has the black bars on the sides.
I've tried on two different monitors, and the best I can do is widescreen that will fill about 75% of the screen. It leaves darkness all the way around the edges. On my 19" widescreen monitor that means I have about 2-3" around every edge that is wasted. Not only that, but on this particular monitor the display comes out with lots of "noise" that creates random dots of color all over the screen. I am using a mac dongle to an hdmi cable..
I am very close to pulling the trigger and coming over to Apple land. My question is: what is the maximum supported resolution that the MBP 17" will provide so I can figure out what type of external monitor to buy for the home office?
The output sound is suddenly really quiet. I have to turn it all the way up to hear anything all all sometimes. My iTunes seems fine and my notification sounds work, but playing videos is seriously sketchy (from YouTube, Hulu, Facebook, wherever).
I've got a 15" Macbook Pro OS X 10.8.5 2.2 GHz processor Intel Core i7 4 GB 1333 MHz DDR3 memory
I give presentations regularly, and I always lock (with password) my MBP if I need to leave the room for a quick break. However, I often need to leave the secondary display projected on the big screen. Is there a way to keep the secondary display showing even when locking access to the MBP?
13" MacBook Pro 2.3 Intel i5 8gb ram 500gb hybrid Hdd OS X 10.7.4 Thunderbolt port mini display port to DVI and with HDMI adapter works fine mini DP to VGA adapter will see VGA monitor (tested on 5 different monitors) but will not display anything on external display. Newer displays just go into power saving mode and older VGA displays just are blank. Even tried DVI to VGA adapter on mini DP to DVI adapter with same issue. I'm guessing I have no analog output from the DP port. tried the SMC and PRAM reset with no results.
so since im getting this new MBP, i wanted to ask... is there such as thing as mini display port to HDMI so i can output to my HDTV for photo/video editing?
I use studio monitors (speakers) with my macbook pro 13 (2010) and a samsung 1080p external display. Whenever I plug the display in, it causes a hum in the speakers, and weirdly the pitch of this hum varies depending on the brightness of the contents of my screen. I have borrowed my friends USB audio interface, and I still experience the same problem, except the hum is now cleaner and louder. I would assume this rules out problems with the internal sound card.
In both cases, the hum stops when the sound card/output 'goes to sleep' (ie after there has been no sound output for a few seconds). Also the hum only starts when the computer is outputting to the display. In the few seconds between physically plugging the display in, and the mac sending a signal to it, there is no hum. This is why I'm starting to think this may be a problem with the computer and not the monitor. The monitor is a cheap (£120) monitor - samsung p2270HD, and also has a TV tuner and stuff.
What I need to know is whether this is a problem with the computer, bleeding the signal through to the sound output, or whether it's my kind of crappy monitor. Another thing, might it help if I changed from VGA (analogue) to DVI (digital) video output?
Info: 2.4ghz Macbook Pro 13 2010, Mac OS X (10.6.5), Win7 on bootcamp
I am having trouble finding a free video converter. I wish to convert .mp4, .avi, etc to .wmv so I can watch them on my xbox and hopefully transfer them. I have tried a few converters most that just don't work or are 'trials' and are useless.
I've been searching around for some time to try and figure out how to hook up my 360 (and it's HDMI output) to my mac pro (quad, 7Gb ram) and 30" cinema display. Apple lists this on their site: [URL] but it's designed as a video capture card, so I'm not sure if it's appropriate for using simply to play the 360 on. Are there any other pci express cards or units which will allow me to take the output from the 360, input it through my Mac Pro and display it on my cinema display without lag, wonky setups, or hijacking anything?
I know this has been asked a hundred times; can you hook up your 360 to cinema display but all the threads are from years ago and people keep saying there will be converters and such soon. Mac Pro, 30" ACD, Apple LED 24" display, and 360 and I have a uMBP.
Initially My macbook pro 13" was working with Sharp 32" display in mirror display with closed lid, after ward I change the resolution to 480p , then TV screen is black now with a message incompatible output format. How to change back to original resolution
I would like to connect my Macbook Pro to my hometheatre via HDMI. Normally no problem with the mini display port and an HDMI adapter, but the port is already used for the 27" cinema display... Is there another adapter available that let`s me connect both, an HDMI device and the cinema display to my Macbook? I only care about the sound - I want to get digital sound to my receiver. (I am not interested in the solution via airport express and then connect via analogue audio cable - I am looking to get a digital sound signal all the way through...) about Macobook Pro: mid 2010, 17", Processor 2.53 GHz Intel Core i5, Graphics NVIDIA GeForce GT 330M 512 MB)
I have an iMac from late 2006. Intel Core 2 Duo 17" monitor 1GB RAM 128MB video card I'm purchasing an xbox360 soon and I'm wondering if there's a way to use my iMac's display as the screen for the Xbox? It would really help since, I wouldn't have to buy a TV along with it.
I have a 23" Apple Cinema Display (the older model in the clear plastic casing) with a Dual 2ghz G5. I'm not to technically inclined yet as I just got into computers and decided to give macs a try. I just got a xbox 360 and was hoping to connect it to my cinema display. Just wondering if this is possible. From what I understand my G5 has and DVI out which is why I had to get a DVI to ADC adapter for it to work with my display. Microsoft sells a VGA adapter but I'm guessing that will not work with my display. Also if it is possible what type of device would I need to use the monitor with the xbox and the G5 together? (I know I can't use them at the same time but alternate so I don't have to keep unplugging and hooking up cables every time I go between machines).
Today I bought iMac 27-inch. Firstly I planned to buy 21.5 inch, but when I saw this 27-inch I decided to buy it. I've got Core 2 Duo version.
So, I wanna to connect my 360 to this iMac. I have Mini Display -> DVI adapter and than DVI -> HDMI adapter and the problem could be sound. DVI does not transmit any sound. So is there option to play sound from 360 on my iMac or via headphones? What if I connect stereo cables (into mini jack using adapter).
MacPro 8 core Nvidia 8800, RAID card - arrived 2/25. Tried second monitor; monitor is blank (and turned on, and says "digital signal" when unplugging display connector from the machine, so it's recognizing the connection, monitor is fine on old G5). RMA'd for a new 8800, rec'd that on 2/28 - same result, so it's probably not the card. Tried 8800 card in different slots, so probably not a slot. Ram lights flash, HD spins, power light is on, so likely not power supply. Motherboard or RAM is only other thing I can think of, or maybe some kind of incompatibility with the 8800. Also, the fans on both 8800's run at what seems like full power when turning the machine on - is that typical for the 8800? Maybe that's a symptom of the problem; it's a lot louder than I would prefer.
I am looking for a solution for sending dv and hdtv quality video, ntsc, out of my macpro to an lcd monitor.
Basically, I want to be able to have a real time program output from my fcp timeline while I am editing.
Previously, I have been going firewire out to my camera, then using the camera as an a/d converter, going composite to an external monitor. I would like to bypass having to use the camera in this way.
It would be nice to find a PCI card (or whatever they're called) that has s-video and/or hdmi and/or dvi, so I can plug directly into the lcd. I just want to make sure, though, that I can select this output within fcp.
