MacBook Pro :: Video Output To TV Only - Possible?
Jul 15, 2010
I'm having a problem that when I put my macbook pro to the television I have to use different resolutions (1080p) on television. This way applications such as plex can't perform like they should.
Is there a way that I can (just as in Windows) use the television as the main and only monitor?
I have a Macbook with a GMA 950 video card, so the S-Video/Video out should work. I bought a mini-DVI to S-Video adapter, then tried connecting both S-Video, as well as composite cables to my television.
The Macbook detects the adapter (NTSC/PAL shows up in Display Preferences), but the television receives no signal. I've tested the television's input using another device and it's fine.
So there seem to be two possibilities:
I have a shoddy adapter. (I'm hoping this isn't true, because it's a pain to return. It is, however, brand new)
There is something wrong on the software end. Any suggestions?
I'm running Tiger 10.4.11. I'm unsure of the exact purchase date, but it's a Core Duo 1.8, so it should be around 2007.
Edit: SOLVED. I had to switch the setting from PAL to NTSC. Once I did that, it seems to now work with the composite cable. That said, it DOES not work with S-Video. This may be because my S-Video cable is shoddy or the port for the adapter does not work. That said, everything seems okay, now.
I am running video from my MacBook to my widescreen tv via a VGA cable. I cannot get any video settings to work that show the video in widescreen format. Everything I select has the black bars on the sides.
I've tried on two different monitors, and the best I can do is widescreen that will fill about 75% of the screen. It leaves darkness all the way around the edges. On my 19" widescreen monitor that means I have about 2-3" around every edge that is wasted. Not only that, but on this particular monitor the display comes out with lots of "noise" that creates random dots of color all over the screen. I am using a mac dongle to an hdmi cable..
I am very close to pulling the trigger and coming over to Apple land. My question is: what is the maximum supported resolution that the MBP 17" will provide so I can figure out what type of external monitor to buy for the home office?
I've got quite a simple question about an MBP and an Xbox 360, which I'm sure some have asked and others have answered before, but I'm looking for a straight-forward response given the situation I find myself into. So I've got the two devices, and I'd like to use the MBP's display as a video output for the 360. What I've also got is a VGA adapter for the 360, so I could connect it to a monitor instead of a TV. So basically, is this achievable, and if it is, what else do I need, in case I need anything else? Sorry for the improper way of writing this message, but all I have is an HTC Desire, and I find it quite difficult to type very well.
The output sound is suddenly really quiet. I have to turn it all the way up to hear anything all all sometimes. My iTunes seems fine and my notification sounds work, but playing videos is seriously sketchy (from YouTube, Hulu, Facebook, wherever).
I've got a 15" Macbook Pro OS X 10.8.5 2.2 GHz processor Intel Core i7 4 GB 1333 MHz DDR3 memory
so since im getting this new MBP, i wanted to ask... is there such as thing as mini display port to HDMI so i can output to my HDTV for photo/video editing?
I have a MacBookPro, model: A 1278 (Mid-2010 13"). Is its mini-display port capable of delivering both video and audio output to a HDMI adapter? or just video output only?
Info: MacBook Pro, Mac OS X (10.6.8), Model No: A1278 (Mid-2010 13")
I am looking for a solution for sending dv and hdtv quality video, ntsc, out of my macpro to an lcd monitor.
Basically, I want to be able to have a real time program output from my fcp timeline while I am editing.
Previously, I have been going firewire out to my camera, then using the camera as an a/d converter, going composite to an external monitor. I would like to bypass having to use the camera in this way.
It would be nice to find a PCI card (or whatever they're called) that has s-video and/or hdmi and/or dvi, so I can plug directly into the lcd. I just want to make sure, though, that I can select this output within fcp.
How can I put this. I have a fellow employee to states that it is impossible to produce HD quality QuickTime via via Windows 7. Is this an accurate statement?
I can not get HDMI video output through FCP-X 10.1.3. I tested the card and I get video through it to my HDMI monitor using Blackmagic Media Express, so I know the card, monitor, and cable are in perfect working condition. I have windows>AV output selected in FCP-X, but can not get a signal through. I think it is a bug, and a major one at that. I really need this for color grading and to properly view my actual clips.
Info: Mac Pro, OS X Mavericks (10.9.4), 3.2 Quad Core 32GB 1066 DDR3
I have a Mac Pro 1,1 and was wondering if there is a video card with an HDMI output that will work with it, or am I stuck with a doorstop that I can't upgrade?
I created a mp4 file with Share/Export File… (settings: Computer, H.264 Faster Encode, 1920x1080 - edited from an HD camera): its video always freezes at a definite point when played on my BD Player connected to my HDTV through HDMI (audio instead continues on the frozen image).It seem that the issue is a sudden video bit rate pick of almost 50 Mbps while its average is around 20-30 Mbps. It is not clear to me if this freeze is caused by the BD Player or by the HDTV not being able to handle such pick.
As a test I used Compressor to control the output bit rate (settings: average 20 Mbps and pick 25 Mbps) and this seems to fix the problem. To be more certain I should do more tests.
if there is a way in FCPX to control such picks (without using Compressor), either in the Share commands (but it seems to me that they don't provide enough setting controls) or in the timeline. By watching the Video Scopes I can see a quite strong signal in the area where the output file has the bit rate pick. But I don't know any way to have a measure useful to identify them before sharing and avoid a trial and error approach...
Info: iMac, OS X Mavericks (10.9.4), FCP X - Canon HF M56 PAL
My sound keeps turning off. When I check the settings, the output device switches randomly between Internal and Digital output. I have no idea where the Digitial Output is coming from and this started about a month again. It switches randomly and then I loose all sound for a few seconds. Sometimes it happens once then stops for a few days, other times it switches back and forth for 5 min. No idea!!!
I am about to buy a 15 in. MBP and I'll be going on a trip soon. I was wondering if there was anything I could get that would let me both use my mac as a tv for my xbox and use a tv as an additional monitor.
Something that would have RCA input/output (the red, white, yellow cords) and would connect to my mac with USB or hopefully firewire 800 (express card 32 would work as well).
I use an external monitor with my macbook, it's a couple of years old 17" Sony TFT. I connect it to the macbook through a DVI cable into the adaptor, into the mini DVI port on the mac. About 90% of the time I do this, the second display shows the correct graphics but is tinted fluorescent green, however if I play aorund enough with the connection, it goes back to full colours. Is this something a genius could fix, or do you have any recommendations about what to do?
For some reason, I can't get Logic Express 8 to output audio to my Mac's attached speakers. It outputs fine through my M-Audio interface, though, but I'd just like to listen without headphones.
I have a white Macbook, Intel Core Duo 2, 2 Gb Ram. (October 2008) Under Leopard, my volume (audio output is a shame); under bootcamp with Windows XP on the hard drive, volume is almost double: is there any work around on this?
I have to link my external mixer to a set of speakers. Rather than buying stereo speakers, can I just get an RCA cable to run from my mixer's output into the 3.5mm jack (next to headphones jack) on my computer?
Will the sound then rout from my mixer through into my computer's speakers?
I just bought a converter cable to be able to put things from my laptop onto the TV. More specifically, I bought this one: [URL]
I've read the reviews and they were all really great. The cable is excellent for images; however, I cannot for the life of me figure out how to do the sound.
The reviews said that the audio output option under system preferences should show up with the receiver, but all it has is my computer speakers.
My audio headphone jack is not working anymore and I want to use my line-in as my audio out. Since I don't use them that much. So I can use headphones/speakers again.
So I started up my macbook this morning and have been using it for awhile when I went to go play some music and can't get any sound. When I hit the volume buttons it shows a shadow of the speaker logo and a circle with a line through it under the volume bar. I have tried a restart and also went into sound controls, where it says "The device has no output devices" . What can I do/what's going on?
I'm trying to hook my Macbook up to my TV with VGA, and the highest resolution available is 1360*768. My TV is a 1080p TV, so does anyone know why system preferences won't let me select anything higher than 720p?
I've googled it without any luck, I need it to passthrough Video along with Audio, all in only one single cable, and also to get DTS-MA, Dolby TrueHD... (if available) and those signals that cannot be transmitted through an optical output jack.