Mac Pro :: Video Out From FCP To An LCD HDTV For Program Output?
Aug 10, 2008
I am looking for a solution for sending dv and hdtv quality video, ntsc, out of my macpro to an lcd monitor.
Basically, I want to be able to have a real time program output from my fcp timeline while I am editing.
Previously, I have been going firewire out to my camera, then using the camera as an a/d converter, going composite to an external monitor. I would like to bypass having to use the camera in this way.
It would be nice to find a PCI card (or whatever they're called) that has s-video and/or hdmi and/or dvi, so I can plug directly into the lcd. I just want to make sure, though, that I can select this output within fcp.
so since im getting this new MBP, i wanted to ask... is there such as thing as mini display port to HDMI so i can output to my HDTV for photo/video editing?
I'm looking to output my mac pro to my HDTV (cheap mans video output monitor). I got a DVI to HDMI connector and all the females and males seem to agree to the point that its all connected up rather well. Only problem is that my mac pro only detects my computer monitor, not the TV that I've attached. Things to note:
* I normally run two monitors at 1920 x 1200. I just removed one and replaced with DVI > HDMI adapter going to TV. * I can get the display to work in windows (although for some reason, although it outputs to the TV via HDMI the other screen stops working) so the connectors are working fine. * I tried hooking up the monitor to the port, downgrade the res to something below 1080, then connected the TV again, no result! * I couldn't get 1080 resolution on my screens as its not an option in the display preferences. * Before anyone states the obvious (at this point even that would be helpful) I restarted every time I attached another display. * I have searched google, apple support, and these forums and I feel im going insane.
To summarise, I haven't seen my mac on the TV yet. Its staring back at me with a blank black.
I have an iMac 27 and I want to connect it to a HDTV samsung 46 full HD. I have conected from displayport to HDMI and i get the screen. But at the same time I have connected a 3,5 minijack from the computer to the RCA audio in of the TV but I dont get sound. I have checked the config of the TV and I dont find any place to activate it. Then, talking about the screen. I have few questions.
How can I stop the screen on the iMac and work only with the HDTV?
How can I config that the windows on the tv have bigger letters while they keep on the same way on the i Mac's screen?
The tv is kind of far away and is difficult to see the letters.
Back on 10.3 I used a Rogue Amoeba program called Detour (I think) that allowed you to control which audio devices played audio from which software programs. I used it to send iTunes music through a USB audio device to powered speakers while playing Office apps noises through the built-in speaker. They discontinued it with 10.4 because Apple changed the way audio is handled. Question: Is there some similar app that maybe let's you control volume of each audio-emitting app? So I could turn Office all the way down (all those grating save chimes are killing me) while keeping iTunes all the way up?
I just ordered the 27" iMac. Trying to figure out the best way to do output to TV. There 2 approaches I would suspect.... but since the 27" display signal is 2560x1440 (HDTV can only go up to 1080p).
I don't know of any adapter or TV that can support this resolution. Will the signal come in only partially displayed
1) Wireless
Atlonas - HDAIR wireless usb to HDMI/VGA with audio
pros+: one connection for audio and video, usb, easy setup, hdmi out, wireless cons-: reported sucky framerates, max res is 1440x1220 (720p), not mac compatible (so will req bootcamp/vmfusion/parallels - windows).
2) Wired
Would need the following
mini displayport + toslink audio + usb to hdmi out 1) [url]
50ft hdmi cable 2) [url]
I heard 50feet is about the limit of HDMI for 1080p if you don't want to mess with amplifiers to correct signal lost.
I have an iMac G4 800 mhz that I'd like to mirror to a 46" Samsung HDTV. I bought the Apple mini dv to both composite and s-video converter. When I plug it in, all I get is a scrambled version of what's on my mac.how to fix this and actually get video to transfer?
I'm new here and I've done a little searching and can't find an exact answer to my situation:I want to convert my video from my iMac and my iBook to my 37" LCD HDTV (Vizio) which has a VGA input already on it.Now, I have a Mini-DVI to VGA adapter already for my iBook, however, the adapter will not work on the Mini-DVI port on my iMac.
My question is: Does anyone know where I can get a cheap alternative to convert Mini-DVI (for my Intel iMac) to VGA with at least 50-75 feet of cable?
What do I need to connect from my IMAC to my Sony Bravio HDTV? Ideally wirelessly would be ideal. If that is not possible what cables/hardware do I I want to connect for both video & audio.
I am trying to get my girlfriend's parents a cable that will hook their 2005 Mac Mini to their HDTV. I don't know the specs on the mini, so I'm wondering what cable I will need. I know it needs to be something -> HDMI. Is the video out port on the mini a DVI?
I'm having a problem that when I put my macbook pro to the television I have to use different resolutions (1080p) on television. This way applications such as plex can't perform like they should.
Is there a way that I can (just as in Windows) use the television as the main and only monitor?
I have a Macbook with a GMA 950 video card, so the S-Video/Video out should work. I bought a mini-DVI to S-Video adapter, then tried connecting both S-Video, as well as composite cables to my television.
The Macbook detects the adapter (NTSC/PAL shows up in Display Preferences), but the television receives no signal. I've tested the television's input using another device and it's fine.
So there seem to be two possibilities:
I have a shoddy adapter. (I'm hoping this isn't true, because it's a pain to return. It is, however, brand new)
There is something wrong on the software end. Any suggestions?
I'm running Tiger 10.4.11. I'm unsure of the exact purchase date, but it's a Core Duo 1.8, so it should be around 2007.
Edit: SOLVED. I had to switch the setting from PAL to NTSC. Once I did that, it seems to now work with the composite cable. That said, it DOES not work with S-Video. This may be because my S-Video cable is shoddy or the port for the adapter does not work. That said, everything seems okay, now.
I am running video from my MacBook to my widescreen tv via a VGA cable. I cannot get any video settings to work that show the video in widescreen format. Everything I select has the black bars on the sides.
I've tried on two different monitors, and the best I can do is widescreen that will fill about 75% of the screen. It leaves darkness all the way around the edges. On my 19" widescreen monitor that means I have about 2-3" around every edge that is wasted. Not only that, but on this particular monitor the display comes out with lots of "noise" that creates random dots of color all over the screen. I am using a mac dongle to an hdmi cable..
How can I put this. I have a fellow employee to states that it is impossible to produce HD quality QuickTime via via Windows 7. Is this an accurate statement?
I can not get HDMI video output through FCP-X 10.1.3. I tested the card and I get video through it to my HDMI monitor using Blackmagic Media Express, so I know the card, monitor, and cable are in perfect working condition. I have windows>AV output selected in FCP-X, but can not get a signal through. I think it is a bug, and a major one at that. I really need this for color grading and to properly view my actual clips.
Info: Mac Pro, OS X Mavericks (10.9.4), 3.2 Quad Core 32GB 1066 DDR3
I am very close to pulling the trigger and coming over to Apple land. My question is: what is the maximum supported resolution that the MBP 17" will provide so I can figure out what type of external monitor to buy for the home office?
I've got quite a simple question about an MBP and an Xbox 360, which I'm sure some have asked and others have answered before, but I'm looking for a straight-forward response given the situation I find myself into. So I've got the two devices, and I'd like to use the MBP's display as a video output for the 360. What I've also got is a VGA adapter for the 360, so I could connect it to a monitor instead of a TV. So basically, is this achievable, and if it is, what else do I need, in case I need anything else? Sorry for the improper way of writing this message, but all I have is an HTC Desire, and I find it quite difficult to type very well.
I have a Mac Pro 1,1 and was wondering if there is a video card with an HDMI output that will work with it, or am I stuck with a doorstop that I can't upgrade?
The output sound is suddenly really quiet. I have to turn it all the way up to hear anything all all sometimes. My iTunes seems fine and my notification sounds work, but playing videos is seriously sketchy (from YouTube, Hulu, Facebook, wherever).
I've got a 15" Macbook Pro OS X 10.8.5 2.2 GHz processor Intel Core i7 4 GB 1333 MHz DDR3 memory
I created a mp4 file with Share/Export File… (settings: Computer, H.264 Faster Encode, 1920x1080 - edited from an HD camera): its video always freezes at a definite point when played on my BD Player connected to my HDTV through HDMI (audio instead continues on the frozen image).It seem that the issue is a sudden video bit rate pick of almost 50 Mbps while its average is around 20-30 Mbps. It is not clear to me if this freeze is caused by the BD Player or by the HDTV not being able to handle such pick.
As a test I used Compressor to control the output bit rate (settings: average 20 Mbps and pick 25 Mbps) and this seems to fix the problem. To be more certain I should do more tests.
if there is a way in FCPX to control such picks (without using Compressor), either in the Share commands (but it seems to me that they don't provide enough setting controls) or in the timeline. By watching the Video Scopes I can see a quite strong signal in the area where the output file has the bit rate pick. But I don't know any way to have a measure useful to identify them before sharing and avoid a trial and error approach...
Info: iMac, OS X Mavericks (10.9.4), FCP X - Canon HF M56 PAL
