I have a 2012 15" macbook pro and one 27" thunderbolt display. Intermittently while I am connected to the thunderbolt display I am forced to shut down my computer and restart.
Info:
MacBook Pro, Mac OS X (10.7.3)
MacBook Pro (13-inch, Late 2011) OS X 10.9.5 operating system with a USB problem. The front port when accessed shuts down the computer...
Info:
MacBook Pro (13-inch Late 2011), OS X Mavericks (10.9.5), USB port problem
I just imported some photos into IPhoto 09 and shortly afterwards my IMac did a hard shut down. Now when I open IPhoto I get the following error:
The Photo Library nees to be upgraded to work with this version of IPhoto.
After that I click on upgrade and get the following msg:
Can't open current photo library using this version of Iphoto.
I was trying to flash my video card but when i tried re-booting all my MacPro does is that it keeps chiming every few seconds and won't bootup.
Video card :
ATI RADEON HD 4870 512M GDDR5 PCI-E DUAL DVI-I/TVO
PN 288-2E131-000SA
SKU# 11133-20-42R
MAC PRO :
MAC OSX 10.6.4
2 X 2 GHZ DUAL-CORE INTEL XEON
4 GIG RAM
Option - command - P - R Boot it with my uncle's PC running on Win 7, My card doesn't even showed up with I use GPUZ or Atiflash. create a partition using FAT and used Freedos to bootup, tried Atiflash, it still doesn't show up when i use the -i option bootup using bootcamp Win7 on my MAC, it showed unknown device yesterday, I finally managed to get GPUZ to show HD4870 but, its not detectable by winflash and when I rebooted it, the same chiming starts again.
I just updated the OS to 10.9.4, and in the ~6 hours since doing so, my computer has locked up twice. Right in the middle of doing a task, all response ceases except for mouse movement. Three-finger salute is ineffective, and the only solution is the power button.Â
Is it possible to roll back to 10.9.3?Â
I have a 2.3 Ghz Intel Core i7 with 16 GB of RAM
Macbook Pro (or whatever it is called now) with Retina display, 256GB SSDÂ
I am getting a pop up "Are you sure you want to shut down your computer now?".
The one we get, if pressed the power button to switch it off?. The problem is not consistent and mostly I get if left inactive for some time(random). I have run the hardware test(installer DVD and pressing D) without any issue found.
hi,
i've had some problems with my imac (2 years old) that include the fan randomly turning on and causing the computer to shut down. after checking console, i found this message had been repeated many hundreds of time
could someone please explain what it is? the vodafone connect is a now defunct mobile broadband which i used before i got wireless.
I have a MBP 2.66 GHz Intel Core i7 and have tryed to connect a Lacie Thunderbolt eSATA Hub to the Thunderbolt port. Â
1 Will it work with the Thunderbolt Display port?Â
2/ Why won't it see and Thunderbolt devices in the Systems Report?Â
Info:
MacBook Pro, Mac OS X (10.7.3)
my mail is not responding and I cant shut my computer down while mail is running it says...
Info:
MacBook Pro (13-inch Early 2011)
Before and since i had upgraded to Yosemite my macbook pro mid 2012 15" has not gone to sleep when i shut my lid i have tried to reset to default in the power settings but that didn't do anything any thing els i could do?.
Info:
MacBook Pro, OS X Yosemite (10.10.1)
My Mail won't allow my computer to shut down or restart. When I click on the icon it won't open either. What am I missing here?
Info:
MacBook Air (13-inch Mid 2013), Mac OS X (10.7.5)
I am having a problem with my external hard drive. I was using it the other day working with some of the files on it and it shut down my computer a couple times. The second time it did this, after the computer shut down, I would turn it on and then it would go right back off until I removed the hard drive and turned it on and it was fine. Now my computer won't recognize the hard drive at all when i plug it in. The light on the hard drive will come on but it will not show up on my computer.
The hard drive is a WD 1TB Passport and it still works fine with every other computer I plug it into, PCs and macs both.I have a late 2008 13" Aluminum Macbook
I am running Mac OSX 10.7.3 and I recently been having issues shutting down my computer with mail running. Sometimes it takes 2-3 mins for it to shut mail down and other times it says it couldn't shut down because of the mail app. Is there anything I can do short of reinstalling Lion?
Info:
MacBook Pro, Mac OS X (10.7.3), mid 2009 Macbook Pro
replaced hard drive in my macbook and have os 10.6 install disc but the computer keeps shutting down after i choose installation disc?
Info:
MacBook, Mac OS X (10.6)
Recently os x has been quitting and I've had to shut down my computer. I've tried to figure out the source of it but I've been having trouble pin-pointing the cause of this issue. Here is my error details.
Quote:
Interval Since Last Panic Report: 13204222 sec
Panics Since Last Report: 9
Anonymous UUID: DAB34753-1975-4323-A64A-180D801699D7
Fri Dec 17 16:22:35 2010
panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x73641369, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000048, CR3: 0x010f5000, CR4: 0x00000660
EAX: 0xbce92834, EBX: 0x1b3474c5, ECX: 0x00000048, EDX: 0x00000000
CR2: 0x00000048, EBP: 0x734a3c78, ESI: 0x0000085a, EDI: 0x08d46000
EFL: 0x00010046, EIP: 0x73641369, CS: 0x00000008, DS: 0x004f0010
Error code: 0x00000002
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x734a3a98 : 0x12b4c6 (0x45f91c 0x734a3acc 0x13355c 0x0)
0x734a3ae8 : 0x1ab0fe (0x469a98 0x73641369 0xe 0x469248)
0x734a3bc8 : 0x1a1713 (0x734a3be0 0x73a8ba45 0x734a3c78 0x73641369)
0x734a3bd8 : 0x73641369 (0xe 0x48 0x6660010 0x10)
0x734a3c78 : 0x73636535 (0x48 0x85a 0x53a48 0x4f91c4)
0x734a3ca8 : 0x7363790d (0x1b061f87 0x8000085a 0xf1db4f7a 0x105)
0x734a3d98 : 0x73638257 (0x1b061f87 0x8000085a 0x0 0x0)
0x734a3e58 : 0x1ac38d (0xffffffff 0x7fffffff 0x10 0x202)
0x734a3e78 : 0x1358e1 (0x0 0x1acfda0d 0x85a 0x54756c)
0x734a3ec8 : 0x136217 (0x1 0x9cfa790 0x8c4fc7c 0x14057e)
0x734a3f38 : 0x136e7c (0x9cfa7ac 0x0 0x0 0x548ee4)
0x734a3f78 : 0x136efd (0x425a22 0xa100c40 0x0 0xa100c40)
0x734a3f98 : 0x425ae1 (0x425a22 0xa100c40 0x16ba2790 0x429324)
0x734a3fc8 : 0x1a14fc (0xa100c40 0x0 0x10 0x0)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleIntelCPUPowerManagement(76.2.0)@0x73635000->0x73653fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: MacBook5,1 (Mac-F42D89C8)
Is it possible to do this? Just my brother has a habit of leaving the desktop PC, the big energy guzzler, on overnight. Is there anyway to shut it down remotely? FTP or whatever? All'st I know is the Mac technician at uni can shut all the machines down in a block from one machine.
View 11 Replies View RelatedCould someone please explain to me why my computer is shutting down in sleep-mode. In addition, when it happens, the fan goes into hyperblow, which doesn't make sense because it would not be operating if the system were completely shut down. It acts like it is shut down but won't respond or wake up, etc. I re-loaded my system software per the Mac Store Genius' advice, but that didn't work. Is it possible that my power supply is going?
View 1 Replies View RelatedI am starting to have my imac go a little nuts on me. I was importing video from Iphoto to Imovie when the screen went dark and the message " Your computer must be turned off now, Please press power button.Â
Info:
imac, Mac OS X (10.6.4)
When I shut my computer down it won't start up again unless I physically unplug it and plug it back in again.
Info:
iMac, Mac OS X (10.6.8)
Can i shut down my computer while downloading this software?
Info:
MacBook Air, OS X Mountain Lion (10.8)
I was just in my room minding my own business and I heard my iMac "shut down" but nothing happened, and I'm still able to use it like normal as I type this message.It seemed to quiet down my fans though, they are still running but much quieter so I guess in a way its a good thing.I'm just curious as to what happened here.
View 1 Replies View Relatedstart up the computer and all is fine it is really cool how you dont see the black screen or anything it is all smooth looking with the setup boxes but when it gets to where you should have the normal desktop this wierd program comes up instead. i cant see the start button or my computer or anything it is like some kind of other program on top of it that i cant quit. i have tried everything but when i click shut down it just shuts down the whole computer not getting me to my desktop.
View 18 Replies View RelatedI was doing software update today when all of a sudden my computer seemed to be overloading from the apps I was running prior...After 10 minutes of "Circle of Death" I performed a emergency shut down. (Probably not the best idea) Afterwards I restarted and was stuck on the main loading screen, (Apple with grey swirling circle) I left this for about 20 minutes came back to check on it and nothing had happened, several restarts with no new conclusion.I popped in the startup disk and ran a diagnostic on it with everything coming back fine...What the heck do I do now?
View 5 Replies View RelatedThis morning the hard drive on my G5 sounded like it was at 8000 rpm's and there was a message on my screen to shut down the computer using the power button. I did this. Now anytime I try to power back up, I get the white screen with the apple and the "booting" icon, which then goes to a blue screen with the same icon, which then is just the blue screen with my mouse icon floating around. Also, on the random occasion, after booting to the blue screen it takes me to a DOS looking screen that asks for my login and password, of which I have neither.
Information:
Power Mac G5
I have an older e-mac that I use and the display suddenly became distorted and stretched. I can't see all of the words in finder or even the apple icon to shut down the computer...it has stretched far off of the display.I tried the display settings in system preferences and tried to adjust settings in geometry I can adjust the height but not the width.
View 2 Replies View RelatedI don't know if this is something to be worried about but I notice that when the tip of the display port cord ( from the ACD ) touches the metal frame of my MacBook Pro there is a tiny blue arch of electricity visible. Well, I just bumped that cord into the frame of the MBP and as soon as that happened the computer completely shut off, it just went to a black screen and turned back on when I connected it via AC outlet. When the computer started back up the clock was messed up ( 2008 date ) and it had forgotten all of my WIFI passwords.
I was just wondering why this happens?
After installing the 10.7.4 update my computer shut down. I restart the computer and the finder is not working any more.What can I do?
View 2 Replies View RelatedI am unable to shut down my computer because the phrase 'no image capture device attached' shows and I cannot shut down image capture.
View 6 Replies View RelatedWhen I plug an externally powered device (printer, external HD etc.) into my MBP via USB, there are small sparks around the plug and the plugged in speaker makes sounds. I think that this also caused my external HD to die.
View 3 Replies View RelatedTwice recently, when I empty the Trash on my mid-2010 MacBook Pro with OS X Lion (current update), the Trash empties but the CPU goes to 100% utilization, the fans come on high, the CPU temperature as measured by an app exceeds 200 degrees Fahrenheit, and of course any commands produce a long beachball. The computer will only shut down by force via the power button.
Is it harmful for the CPU to max-out like this? The power-on self-test on startup reported "passed" so there doesn't appear to be any damage but I am not sure how much these tests really test. The Apple Hardware Test will not run in Lion. I ran one with my old Snow Leopard startup disk and it reported pass but recorded the test date as in the year 4012.
