MacBook Pro :: Secure Mbp Using DVI Port Screw Holes?
Aug 23, 2009
I'm wondering if there are any products out there can secure my MacBook Pro by using one or two of the screw holes on either side of the DVI port.
I bought a Kensington MicroSaver keyed lock even though MacBook Pro users said it didn't work. I'm once again confirming that... The Kensington lock port on the MB and MBP are totally useless. There are lots of products of this nature out there for VGA/serial ports, but I have found nothing for DVI.
This is the only product I found that does what I want, but it isn't available for sale anywhere:
[URL]
[URL]
View 4 Replies
ADVERTISEMENT
Nov 23, 2010
So I removed my 4th bay's tray and it seems the dampeners are not thru the holes and unless you get them half way thru the holes you cannot slide back the tray because the screws are too high and make contact with the surface.
When you have nothing to screw them into what is the best way of getting the rubber dampeners thru the holes so the screws will sit low enough in the tray to reinsert the tray?
So my final tray #4 has no drive attached but those rubber stopper things aren't easy to get thru the holes. Right now the only way I can put my track is to remove the screws entirely and keep them outside the case. I'd rather them insert into the holes of the sled that's empty but for I need those darn grey rubber things to go thru the holes.
View 14 Replies
View Related
Feb 10, 2010
I have some things I want to keep very safe. It is not pornography (i.e. kiddie porn), nor is it illegally downloaded media files.
Imagine if I had caught a local official doing something in public that was extremely bad, and I wanted to release the pictures anonymously to our local paper and did not want the police to seize my computer and prove it was me. This is not the situation, but it is the type of stuff I want to keep extremely safe.
View 24 Replies
View Related
Mar 23, 2009
I have just received a Firewire enclosure for a SuperDrive I bought months ago from the same company, Other World Computing. I was told that they would work together, but now that I'm assembling it, I find that the tiny holes on the drive (very near the edge of the drive, and only two on each side of the top, not the many more that the enclosure seems to indicate should be there. In addition, the holes in the drive and the ones in the enclosure don't match up. The enclosure also is very long for the drive, even allowing for room to attach the ribbon cable and other cables inside.
I have now spoken with three different people at OWC, and nobody knows why this is or how to work out the problem, except to offer me another, less desirable enclosure that they assure me will fit the drive. (I didn't mention that the drive is an older model and that they no longer carry it.) Well, I was assured that the one they have already sent me was just fine for my drive, so you can 't blame me for being a bit wary of the assurances for the other enclosure.
The drive fits very snugly in the enclosure and doesn't seem to shift around. If I replaced a metal piece around the front of the drive that I took off to make it fit more flush with the front of the enclosure, it would be an even tighter fit. It wouldn't look as nice, but it could be done.
My question is I whether I can dispense with putting in those screws, which are meant to secure the drive within the case and keep it from shifting around. (The screws meant to attach the back panel of the enclosure, the one with the internal cables, and the holes in the enclosure will fit together fine, because they are both part of the same thing.)
I would really love to move on with this and not try out anything elselet alone a less good driveif I can.I wonder what you think.I have only a short while before I must make a decision, and I'm leaving for a visit to part of my family in about two weeks. Any input is very welcome.
View 8 Replies
View Related
Sep 11, 2009
I was trying to do a memory upgrade the other day, and tried to take the wrong screw off. I went to try to screw it out, but the screw stripped. How can I get this thing removed and replace it with a new one? Or should I just take it to the local genius bar?
View 1 Replies
View Related
Dec 16, 2009
I have a mid-2006 Macbook and have never tried to do any tinkering on the inside except for installing some RAM. Whenever I had any trouble in the past, I took the machine into the Apple Store. Now that my Applecare warranty is up, I figured that I can crack it open to do some repairs regarding my fan without voiding my warranty. Alas, it seems that someone on Apple's end stripped a screw / put it in improperly. Now, I cannot get it out. The screw in question is the center screw in this picture (from iFixit, not my Macbook): All other screws in the tear down came out easily except for this one. Dammit. What should I do? It is too late to point fingers at Apple because I have no proof that I wasn't the numbskill who did this. It is just such a small screw... I'd just like to remove it somehow
View 14 Replies
View Related
May 10, 2010
I have about 60 GB of data on a new 750 GB drive that I want securely erased as I am passing that drive on to someone else.
Zero out the drive or do a 7 pass is secure BUT takes a long time for 750 GB
What if I drag those files to trash and do a SECURE EMPTY TRASH - much quicker as I am not writing 750 GB of zeroes but is it as secure?
View 11 Replies
View Related
May 1, 2009
Sorta found this forum out of sheer luck but it looks like a good place to kill a couple of years off my life
Im looking for a replacement screw for the left side of a MBP A1150, [URL] sells a screw kit for around 50bucks but all I need is 1 screw and wondering if their is a cheaper alternative
Pic is attached along with the void that will never be complete
View 5 Replies
View Related
May 28, 2010
Just bought a new MacBook Pro yesterday and I'm having trouble getting Time Machine to work with my NAS (WD My Book World Edition which supposedly supports Time Machine after their last firmware update). Time Machine sees it and starts writing to it but then stops recognizing the external NAS drive even though it's still connected to the network and I can access it and its files through the Finder.
So I did some Googling and came across this article and this command line...
View 9 Replies
View Related
Jul 28, 2010
Does anyone have any information/experience with the shells for your MBP? I had thought about getting one for my MBP but I have read issues of the cases scratching the laptop as well as the plastic clips holding the case snapping off after a month or two. Seeing as how most of these cases are around $40-$50, I just wanted to see if this was a good idea or if I should just say screw it and get a sleeve instead.
View 4 Replies
View Related
Aug 27, 2010
The screws that hold the battery in place (Triwing Ones) One of them is stripped on my MBP. I ordered some new ones and they should be arriving next week. Does anyone have an idea how to get the stripped one out? I have tried pliers but they don't seem to grip the screw to be able to turn it. This is the screw I mean.
View 14 Replies
View Related
Oct 23, 2009
I have a refurbished macBook Pro and everything was working fine (it's about 9 months old). So everything was fine till suddenly the right fan started making these horrible noises. Kinda like a motor boat along with with ticking clanking sounds. It comes and goes: also Istat shows that the max RPM is 3000 or so.
Thinking something was stuck in the fan I figured i'd take the back cover off to take a look, and now I have stripped one of the outer screws holding the back cover. Now i'm worried my warranty is void, even though the fan issue was not my fault but the stripped screw is.
I plan on going to the apple store soon to see what they say but I was curious as to what you guys think first. Will the apple store fix the screw and then replace that fan?
View 24 Replies
View Related
Mar 3, 2010
I was just wondering what is the best screw driver set for removing the screws from the late 2009 macbook pro unibody?
View 10 Replies
View Related
Mar 14, 2010
I bought a new harddrive to upgrade my macbook's old hard drive to a new one over the spring break. I tried to unscrew the screw on the black plastic retaining bar, but I unfortunately failed to do so: even worse, the screw is completely stripped now!
Since the screw is so small, I don't think I can use any of the "Easy Out" kind of unscrewing stripped screw tools... or can I? Wouldn't I damage the retaining bar? What should I do?
View 7 Replies
View Related
Jun 13, 2010
I have a brand new 15" i7 Macbook Pro that I bought from the Apple store over 14 days ago. I opened it up to put in an SSD drive and optibay. Now, this was my first time opening up a unibody, but I've opened up many notebook computers and older style Macbook Pros before, so I'm not a newbie.
However, putting things back together I ran into a problem. One of the screws that secures the metal plate on the bottom of the machine will not catch in it's hole, and therefore does not stay in. I swear I did nothing to strip this screw or the hole it goes into. When I screw the screw into the hole with the case off, it smoothly sets and seems to be fine. However, when the metal plate is put on and the screw is put threw it, it's like the screw is not long enough to reach the threaded part of the hole
Yes, I'm positive it's the right screw. The hole I'm talking about is along the back side of the computer, towards the hinges, and is the only one of the 4 screws that is the shorter style screw (vs the long ones that occupy the other three holes).
I'm at a loss for what to do. I'm thinking about putting all the stock stuff in place and taking it into the apple store for help at this point.
View 7 Replies
View Related
Feb 7, 2012
Recently I up/downgraded from a 2010 17" Macbook Pro to a 2011 15" Macbook Pro. I had previously swapped the old hard drive in the 17" to an SSD using the OWC data doubler kit. Now that I moved on to the 15", I wanted to move my SSD over to the new Macbook Pro.
During the process opening the new MacBook and unscrewing a two of the screws around the optical drive, both of the screws became stripped on the module the covers the optical drive. I have to be honest and say that they are pretty badly striped at this point. I've read a handful of articles online with many different possible solutions on removing the stripped screw, but none of which seem to work nor do I want to cause any further or possible permanent damage, I do have AppleCare on the machine, but I wasn't sure if modifications and upgrades such as this where covered.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Feb 23, 2012
I need to take the back(chassis) off of my mbp 13" mid 2009, I just wanted to know what screwdriver i need to take the back(chassis) off to install more RAM.
Info:
MacBook Pro, Mac OS X (10.7.2)
View 10 Replies
View Related
Jun 13, 2012
The last two Apple software updates seemed to have screwed up my computer. After downloading and installing the last one (which included an update to iTunes), I could not turn on iTunes - it just made my computer freeze up.I could not shut it down the regular way.So I pressed the power button for 5 seconds, which turned the computer off finally. Then let it sit for 30 seconds. And when I went to turn it on - the computer got to the gray screen and just hung there.I finally had to press the power button for 5 seconds to shut it down so I could hook up my external hard drives and boot from there.Tried to see if I could boot from the internal HD it froze again. Tried to run Disk Utility, which recongized the hard drive under the name I gave it and it was mounted. After running Disk Utility, the internal drive is no longer showing up on my desktop. It does show up in Disk Utility and in Drive Genius but will not mount.I should also mention that my keyboard and trackpad stopped working after the last update.I have been using an auxiliary keyboard and trackball for years, and have no problem with them now.
Info:
Mac OS X (10.6.4)
View 6 Replies
View Related
Jun 16, 2010
Does anyone know what the screw size is for the bottom case screws and the 2 hard drive bracket screws are?
I need to replace some
Anyone know where I can get these screws?
View 3 Replies
View Related
Aug 13, 2010
i am trying to disassemble my MacBook pro 2010 as i need to change the top part (which is attached the keyboard) has couple of dints on it. i can get the unibody top part for around $270 , my question is what screwdrivers i need to disassemble MBP unibody 2010 is there a special screw driver for this? , do i just need a screwdriver or any thing else too?
also i was not able to find any good how to video for this .
View 9 Replies
View Related
Nov 18, 2010
First off, I am very O.C.D when it comes to my electronics and I constantly worry about my stuff. Over the past month, I have been checking SMART status and benchmarking my hard drive at least once a day. I'm a little worried that my hard drive is dying... Yea, I'm crazy...Regardless of the above, I would like some answers to a few questions..First, how durable are the unibody lower case screws? Do they strip easily? If I purchase the correct size screw driver (phillips #00), what are my risks of damaging the screws, or possibly wearing them out prematurely?Second, how difficult is it to realign the lower case and not cause a "wobble." I have read some people incorrectly screwing in the bottom case and basically bending the lower case, causing the machine to wobble on a flat surface.After reading my manual, Apple clearly indicates that users are permitted to service the hard drive. I'm technologically savvy but my only worries are damaging my $2500 machine...
View 3 Replies
View Related
Jul 30, 2009
Is it supposed to snap in as well as screw in when putting it back onto the computer? When I upgraded my HDD I thought I remembered seeing in a tutorial video that the back panel was supposed to snap shut before screwing it in. Am I missing something or am I totally wong here?
View 4 Replies
View Related
Aug 2, 2009
I was just about to order Snow Leopard, but then it hit me. Could it screw up rEFIt and my triple booting-ness? I asked my friend who is also using rEFIt and they think it could mess things up. What's your opinion, will it do no harm, or will it? And if it does, should I still get Snow Leopard? It was a bit of a pain installing everything, and I've just finished installing 80GB of games onto my Windows partition, so obviously I don't want that getting wiped or unable to boot!
View 2 Replies
View Related
Jul 20, 2010
So I was taking apart my MBP to reapply thermal paste on the chips and I accidentally stripped one of the screws holding the super drive to the chassis. It is a 3.3mm Phillips screw that is on the bottom right of the super drive if you are facing the screen when it is upright. The screw is heavily stripped as looks nothing like a + now. Does anyone have any ideas as to what I can do to remove it without damaging the rest of my MBP? I have 3 sets of high precision tools and they all are having a hard time with the screws on my MBP. My local Apple store was nice enough to order some new screws for me which i will be getting in a few days.
View 10 Replies
View Related
Aug 11, 2009
How many of you would like to see a HDMI Port? Why the miniDisplay port? Why not remove ethernet jack and miniDisplay port and replace it with a HDMI port. That way one HDMI cable feeds digital video AND audio. Am I the only one thinking of this?
View 22 Replies
View Related
Jul 3, 2012
I have just ordered a new MacBook Pro and it does not have enough USB ports for my needs.If I have a USB 3.0 hub and I mix USB 2.0 and USB 3.0 peripherals on it, will the whole hub/computer USB 3.0 port be slowed down to USB 2.0 speeds?I am thinking back to Firewire, if you have Firewire 800 and 400 devices on the same chain, the whole chain slowed to Firewire 400 speeds.I don't think this is the same with USB but wanted some reassurance..
Info:
iMac, Mac OS X (10.7), MacBook Air, Mac Mini
View 7 Replies
View Related
Apr 30, 2012
I have a circa-2007 iMac and am trying to remove the cover that conceals the RAM. I can turn the screw but it's not coming out.
Info:iMac Alum 20", Core 2 Duo, 2GHz, 3 GB / Macbook (2010), Mac OS X (10.6)
View 3 Replies
View Related
Sep 4, 2010
If you did not upgrade Mac mini RAM, you may not notice what I saw. Be aware of what I found and unbox in Apple store if you buy Mac mini 2010 in store, and check if you got same batch products I got. Otherwise, genius bar may deny your warranty.I got chance to unbox three new Mac mini 2010 due to machine transfer and replacement. I found two of them have the similar problem. I noticed one of three screws (the smallest one, close to RAM) fixed the fan is stripping out. It cause me to use a third-party software "istat pro" to check hardware, I found only hard disk Tm sensors working, no CPU Tm sensor and other Tm sensor's information.Another Mac Mini 2010 from MacMall has no issues at all. Moreover, the defect Mac mini did has louder noise coming from hard disk and fan than the perfect Mac mini and freeze two time in my 7-day usage (2-3hours/per day).
I went to Apple store and got replacing whole unit by a new Mac mini in Apple store yesterday. BUT the new one has the similar problem (same screw stripping and no Tm sensor) out of the box when I tried to update RAM today. Make me feel I should buy a lottery recently.In addition, make me feel unhappy today is the guy in the genius bar suspected me trying to move the screw and tear-town of machine, rather than satisfy customer. BTW, one of three managers I met is rude (I went to the same store three times within two days).If I were what they suspected, I must be very stupid to damage the screw two times (lose warranty) and then go to Apple store trying to replace again. To be honest, I am a backup for department IT support. I know how to tear-town Mac mini 2010 if I want to.I just want to make things right. The genius bar told me they will run a system diagnosis. I got feelings that both defect Mac Mini may come from the same batch of products. It may have more in the market.
View 9 Replies
View Related
Mar 18, 2008
I've removed the one screw from the motherboard, but I can't get it to budge sideways at all.
View 2 Replies
View Related
Aug 29, 2009
I have a copy of Snow Leopard on the way and am wondering what I will have to do? Does you need to back up everything, or does it "dynamically" install? Either way, will I need to do anything to keep my bootcamp partition working?
On another note, I currently have Vista Ultimate in bootcamp and want to change to Windows 7. Is there a way to "upgrade"? Or will I have to clean install and rebootcamp?
View 1 Replies
View Related
