I have a MacBook Pro early 2011 2.2 ghz with an SSD and a HDD. Mac OS is currently installed on both hard drives and I would like to remove it from my second hard drive, without deleting all my documents, movies, etc.
Info:MacBookPro, Mac OS X (10.7.1), 2011 model, 15 inch 2.2 GHz 8GB RAM
Have successfully installed a Seagate Barracuda 160GB internal HD (2nd HD) and it's icon is mounted on the desktop. I used Disc Utility to format the drive (Mac OS Extended-Journal), but was unable to install Tiger because of a faulty install DVD (I think). I tried the Panther install DVD's that came with the G5, but am unable to open the the first DVD of that set either (get the grey screen with no wheel, with strange color lines).
More importantly, the drive somehow has a complete duplicate of my other drive. Everything! Also, it updates with things that that I download or add to my Panther drive. How is this, if I did an erase and format using Utility? I'd like to use this 2nd HD as a backup HD (if I can ever get an install DVD to open). Why doesn't the 2nd HD show in the Start up Disc Window? How do I successfully erase it and format this 2nd HD? How would I run a different OS on this 2nd HD?
Information:
G5 dual 2.0GHz
Mac OS X (10.3.x)
Powerbook G4 1.5 - OS 10.4
I have recently purchased a Mac Pro (early 2009). It has separate 300Gb and 2Tb internal drives.
My plan is to install another internal 3Tb drive to act as a backup for the other two. Can time capsule be set-up to do this?
Info:
Mac Pro, Mac OS X (10.7.4)
I recemtly purchased a G4 at a local thrift store for $10. After repairing the processor and installing and updating os X 10.4 on a 20g drive I added and additional 100g drive for music and videos. The 20g drive read/write is fine and writing to the 100g works fine also. When attempting to view videos located on the 100g drive, the system hangs. when using itunes it must rebuffer every few seconds.
View 5 Replies View RelatedI have a G3 mac blue. About 4 years ago my ex-husband installed a new hard drive and upped the memory as far as it would go. I am currently using Mac 4.11 system I think. This morning the computer was making an odd noise and wouldn't move off the screen saver mode. I rebooted. When it came back up, the odd noise was there for a minute or so and then stopped. However, it will only access the original hard drive, which I haven't saved anything on for 3 years. How can I find my secondary hard drive? Incidently I wasn't able to access the old hard drive for about 2 years. Sure it would be nice if i could access the both of them but i just want my new one back!! I live in a small town where no one is mac proficient. I replaced the power unit a year ago myself.
View 1 Replies View RelatedI'm not the most computer savy guy in the world but I thought I'd ask the question. Is there a way to remove the hard drive from an old MacBook I have that stopped working (the plug where the power cord goes in is messed up nothing is wrong with the hard drive I believe) and use that hard drive as an external hard drive for my new(ish) iMac and use it for extra space? It would be amazing if I could. Anyone know how I can do this?
View 11 Replies View RelatedThis post may be in the wrong spot and if it is I am sorry.
I have a sticky trackpad on my unibody Macbook. I received my box to send it in for repairs however I do not want to send in my hard drive being that I have sensitive data on there and they could easily work around my password if they really wanted to. Do you think I could just remove my hard drive and send it in? Is my hard drive necessary to send in?
I currently have about 143 Gb of memory taken up on my internal hard drive as Backup. Â
At least this is what I see when I go to About This Mac / StorageÂ
I have an external back up drive so really need to free up that area of the disc...Â
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
How do i clean my trash on a external hard drive. Ishuts down when i try to empty trash on the external hard drive.
Info:
MacBook Pro, Mac OS X (10.7.4)
I can't boot my MacBook Pro. My hard drive is completely full. I was running a software update and didn't realize how big the file was. The computer shut off part of the way through the update and hasn't booted up since. How can I access the files on this drive to make some space?Â
I am running mavericks, but I don't know which version. I purchased a cable to access the internal drive through a USB on another computer. The drive shows up in disk utility, but will not let me browse the drive.
I have a great HP computer, but I like Mac way better then Windows Vista, so is there a way to install Hackintosh on my secondary E drive, and leave Vista intact on C for gaming? And can you provide a reliable link to a Hackintosh download?
View 2 Replies View RelatedI realize this may be a stupid question but here goes... I have recently installed Windows XP with Boot Camp and now realize more than ever how much I hate XP and was wondering if it were possible to remove that partition all together from the hard drive, and I guess have it added back to my Mac OS side. I think i know the answer but just want to be sure.
View 7 Replies View RelatedI have issues w/ one of the partitions on my hard drive. Can I remove one (of two) w/o erasing the entire disk?Â
Info:
iMac, OS X Mavericks (10.9.1), iPad2, iOS 7.0.4,
I'm replacing my Macbooks hard drive for the second time. The first time I replaced it I stupidly followed the official Apple guide which makes no mention of the hard drive caddy, so ended up chucking the caddy away with the old hard drive (yes, I know, durr). So now I'm trying to fit in my nice new 500GB HD and have not tab or anything to grab onto to get my old drive out of Macbook
View 9 Replies View RelatedSorry if i posted this in the wrong section. I have a LaCie d2 Quadra 500GB hard drive that has a broken power brick (for the second time) and i'm wondering if it's possible to take out the hard drive and install it in a Mac Pro (2010, 8 Core, 2.4GHx)?
View 5 Replies View RelatedThe default behaviour of Macs seems to be to wake up from sleep whenever a USB device is disconnected or switched off. This is not very helpful for how I like to operate. I want to keep most of my files on an external USB drive without power-down feature so that I have fast access to them at the click of a mouse button (don't want to wait for the drive to spin up as can happen frequently if your drive has the power-down feature). However, I like to sleep my Mac several times a day, and when doing so would like to switch off the external USB HD until I get back. So you see the annoyance, but perhaps there is a way to disable this wakeup feature of Leopard. I'd be happy to learn it from you!
View 1 Replies View RelatedI have been searching for 2 days on how to remove the software upgrade dvd from my external hard drive. I have not figured out a way to do so. So I used my external hard drive as a disk to upload the OSX 10.5 onto my iMac, now everytime I turn on my computer it thinks i am trying to install leopard again. I need help removing the leopard dvd from my external hd.
View 6 Replies View Relatedwe are trying to hook up our TV as a secondary monitor (for hulu, netflix, etc) but it defaults as the primary monitor. We would like to keep the imac as the primary monitor, and have the TV as a secondary, but cannot figure out how to do it! The only way we can get the imac back to primary status is if we use mirror mode. Once we take it off mirror mode, the TV becomes the primary monitor again, and there appears to be no way of switching it in OSX display preferences.
I've done similar hookups with my laptop, and the TV defaults as the secondary monitor. Why isn't this happening with our iMac? Any ideas?
My MBP was recently squished in a motorcycle accident and its hard drive and superdrive were destroyed. Is it possible to buy a new hard drive, put it in an external USB 2.0 enclosure, then install OS X on it using the discs that came with my destroyed MBP in a different Mac, then put the hard drive into the squished computer and have it use that hard drive as its startup disk? The motherboard on the squished computer is fine, I just can't install OS X on it because it has a broken superdrive.
View 4 Replies View RelatedI'm thinking about installing Windows 7 on my hard drive using Bootcamp. I'd like to know if in the future I decide to remove windows, am I able to remove the partition and revert back to the full hard drive space or not?
View 1 Replies View RelatedI have an iMac and since the install of Mavericks the secondary HDD is always spinning (even if there are no data in it).Â
What can I do ? The continuos drive noise is very annoying ... and sure this wil shorten drive's life.Â
I'm using OS X 10,9,3
Processor 3,4 i7
16GB ram
SSD 512GB (primary) + HDD2TBÂ
I recently bought I new primary sata drive for a MacPro and loaded Leopard on it while keeping a 2ndary internal sata drive ... which included data ... intact.
Now under Leopard, under permissions for the 2ndary internal sata drive, it sees an "unknown" account (which is the previous Tiger owner) and it doesn't allow any writing/ deleting on the 2ndary drive.
I know how to change the permissions and ownership but don't know exactly what Leopard default ownership and permissions I should assign to the 2ndary drive.
The new Home acct name, System, Admin, Everyone etc.
Usually there is a cascading list of 2 or 3 but I can't remember what
they should be.
I recently had to erase the HD on my iMac and do a complete restore from my external Time Machine drive. Luckily everything,including programs, were restored to where they were during the last backup. This mishap underscored the importance of having everything backed-up and made me truly appreciate Time Machine. As a result I'm considering adding Time Capsule as a secondary Time Machine drive (in addition to the G-drive I have connected via firewire),to act as a back-up to the back-up. I was wondering if I'd be able to do that if I install TC using the "Bridge to an existing network" option during setup.
Would I be able to manage my backups by changing the volume in Time Machine's settings from TC to my G-Force HD, or vice versa? To be clear, i want two full back-up records on separate drives at any given time. I am accustomed to doing my back-ups manually as I don't want my back-up HD running continuously or every hour or so as is suggested by Apple. My feeling is that my external HD will last longer by not being powered-on 24/7. Another reason why I like TC over simply getting a second external HD is because of the networking capability of TC. I get a very weak signal as it is in my basement and I'm hopeful this will improve streaming to my ps3 and iPhone when I'm downstairs.
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies View RelatedMacbook Pro 17" Early 2011Â
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
I'm replacing my old 120gig hard drive with a new 320gig hard driveWhen Ive got the new hard drive installed can I just put the old hard drive in a enclosure kit/caddy and copy my music/movies/etc across to the new hard drive?Or do I have to copy the data off before I remove the old hard drive?
View 3 Replies View RelatedI need instuctions on how to remove the DVD drive from my Macbook?
View 4 Replies View RelatedToday I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
