When I try turning the computer on, I get the option to choose the startup disk, but only Recovery is visible. When i check in Recovery, it still shows my original start up disk, but I cannot restart off that. What do I do?
Info:
MacBook Pro (13-inch Early 2011), OS X Mavericks (10.9.3)
I am having trouble trying to boot from my lion OS X install disk on a 2007 macbook. The disk ejects when I start up with the option key pressed.
View 1 Replies View RelatedI have a 13 inch aluminum late 2008 MacBook. The processor is 2 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3 running OS X Lion 10.7.4. I am in the process of replacing my old hard drive with a new one.
My old hard drive is partitioned as follows:
Name: Macintosh HD
Format: Mac OS Extended (journaled)
Size: 132.5 GB
Name: BootCamp
Format: Windows NT File System (NTFS)
Size: 26.69 GB
When I was partitioning the new drive I did so as follows:
Name: Macintosh HD
Format: Mac OS Extended (Journaled)
Size: 973.51 GB
Name: BootCamp
Format: MS-DOS (FAT) --- This was the only option that I was given that I thought would work. I did not have the option of "Windows NT File System (NTFS) to choose from. I only run 1 program on Windows and that is the only reason I have BootCamp on there at all. However, I do HAVE to have that program. Size: 26.34 GB (I just used the same size that was current, or close to it.)
I connected the new Western Digital 1 TB through an external device, partitioned it as stated above, and then used Carbon Copy Cloner to clone the drives. It went through fine. (It took 2 hours and I went to bed before it finished.) This morning I woke to see that it had gone through well. I then started the process with the BootCamp drives.
However, before I started it gave me errors stating that I wouldn't be able to run Windows off of the Cloned BootCamp drive. So I used Winclone and it seemed to work fine. I then replaced the old drive with the new one. Then I rebooted the machine. Everything seems to be fine except when I went to restart it in Windows using BootCamp that was not an option. The only start up disks listed are the Macintosh HD.
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
I recently installed windows 7 (7001) on a new drive (750gb) and re-formatted my old windows 7 drive (80gb) to be used as a backup for OS X. After that the windows boot drive was not available at start-up. Here is how it went:
original set up:
HD (os x)
Windows drive (80gb)
after new drive:
HD (os x)
windows drive (80gb and 750gb) I had windows 7 installed on both drives and at windows boot was given two choices of windows 7.
This worked fine until I reformatted the old 80gb drive to be a second mac drive and at start-up the windows boot drive was not visible only HD (os x). The windows drive is still visible on the os x desktop (all files are visible) but not under "disk startup" in the preferences pane.
current set-up:
HD (os x)
mac backup (80gb)
windows 7 (750gb) not bootable
I tried booting from windows 7 disk to repair but it does not recognize any bootable windows drive. Should I go through bootcamp utility to repair the windows drive?
After partitioning my hard drive, I was not able to boot up my computer. Currently it is stuck at the white screen when it boots up. I tried using the USB Recovery Disk to boot up however it does not seem like it is responding to anythingÂ
I pressed C while having the USB inserted I also tried pressing D to go in to the Apple Hardware Test nothing happened.
I also tried resetting the VRAM? It did beep and it reset however I still can't bootup
Info:
MacBook Air, Mac OS X (10.6.8)
I purchased my macbook Pro just before Lion was released. How do I create a Boot Recovery Disk?
Info:
MacBook Pro, Mac OS X (10.7.2), i7 4 gigs RAM
The problem is that the mac will not boot period.When I press the Option on start up, it takes me to a screen where I could select to boot from the Macintosh Hard disk or Recovery 10.9 disk.Choosing either of these still does not boot up the computer.Â
I think that the hard disk is damaged but what I do not understand is why I can still get the option to choose the Hard disk or the Recovery disk.I am waiting to hear from Apple Support on when I can take my imac to the genius bar and I was wondering if there is anything I can do before then. Intel imac 27-inch bought refurbished in November 2010 with imac apple care.Intel quard core processor, 4 Gig RAM, 1 terabyte HDÂ
Info:
iMac
I have no recovery disk at boot since I upgraded from Snow Leopard through app store?
Info:
80 iMacs 30 MacBook Pro's 40 iTouch, Mac OS X (10.7.4)
I am trying to repair my mac. But in disk utility, the hard disk is not visible to proceed. Its showing disk0 -> volume with only 1.79GB. and all the options are disabled. The capacity of my mac book pro was 500GB.Â
Info:
MacBook Pro, OS X Mavericks (10.9)
I'm currently stuck in recovery with the hard drive wiped. I have tried re-installing mavericks but keep saying i need internet connection but i only have the option of ethernet firewire and bluetooth no wifi?? (I bought this laptop second hand) i have went to terminal and manually added my router information to connect via ethernet it is showing up in the network utility that its connected but if i try to run the os re-install it still says no internet connection but shows there is 100mbit/s i haven't entered my password when manually connecting the ethernet should that matter? Really stuck and don't know what to do?? i can't boot onto anything else apart from recovery!!
Info:
MacBook Pro, OS X Mavericks (10.9.1), Cant change language in recovery
I cannot "see" my Windows partition from the preferences pane in bootcamp (osx) (where I would go to set Windows as a boot partition). The only way I can make Windows to start is by using the Option key at boot.
Strange this is, the partition is visible on my Osx desktop (mounted), I can browse the files etc... but Bootcamp somehow thinks it's gone.
I'm on a 2008 model Mac Pro 8-core system for work. For whatever reason it doesn't have a recovery partition. I read that if I don't have a recovery partition, I can't make a recovery USB bootable drive....so how do I make one? And no, I cannot reinstall the OS on here, that would be beyond detrimental to what's going on here. (too many details to get into)Â
Alternatively, can I make one with my 10.8.5 MacbookPro at home and run it here on my Lion system?Â
How do I clean my start up disk for more space? I have I cloud but don't really use it.
Info:
MacBook Pro, Mac OS X (10.7.4)
I partitioned windows XP onto my Mac HD a few days ago. It worked beautifully until last night. Whenever I booted to it, it stuck at the welcome screen for 10 minutes, and was really buggy upon startup. This morning, my MacBook Pro (bought in August '09) upon turning on automatically boots to windows XP. No amount of holding "c" or "Alt" will bring up rEFIt or boot camp selection pane. And the kicker is, the windows XP partition is completely corrupted.
Here's what happens now:
1) Turn Macbook Pro on, hold down "c" or "Alt"
2) White background for ~ten minutes, nothing happens
3) After a long time, boots to black screen and says "Startup Disk Error... Press Ctrl+Alt+Del to restart.
I'm pretty sure its trying to boot to Windows XP partition, because Ctrl+Alt+Del is not a Mac OS X command... But I can't boot to my Mac OS X partition.
Macbook Pro running on OSX Mavericks is having problems.Â
Today I turned my Mac on, and it started up with a loading wheel and a loading bar. When the loading bar finished, the Mac turned itself off. I tried many times, same happened every time. I then went into OSX Recovery, started repairing Macintosh HD, but the error message saying "Disk Utility can't repair Macintosh HD" came up and now I don't now what to do.Â
Is there any way I can back up my files in this situation? Is there any way I can repair the disk without having to erase all data and reinstalling OSX? Or do I really need to bring it to a Apple Store for repair?Â
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have a new MacBook Air running Lion. Every time I use my backup software, it changes the permissions on my external drives, and I have to change them from read only to read & write, so I've gotten in that habit. At one point, I noticed that the permissions on my internal *startup disc* were read only, so I (foolishly, I now know) changed the permissions on the startup disc to read & write, with apply to all enclosed items checked. As I continued working, I got messages that a number of extensions could not be used and will be disabled (or something like that). I decided to reboot, so the computer could reset and hopefully correct things.
When I tried to boot, it hung up on the grey screen with the Apple logo and the spinning clock/gear. I let it spin for a while, then forced power down and tried to boot in safe mode. The progress bar appeared as it's supposed to, but when the progress bar finished, it went back to the grey screen and hung up again. I let it spin for over 40 minutes before powering down, just in case it was doing diagnostics or something. I don't have access to the original OS DVD (nor do I have an optical drive to put it in). Any way for getting the computer to boot, at least in safe mode?
Next year when snow leopard will be released I was thinking to upgrade my poor 60gb hard disk to something more probably to a 320 one, but I got one problem I lost my recovery disk and actually I don't really need it as you know Tiger is very stable.
When my old macbook will have inside the new hard disk do I need to reinstall tiger then upgrade it to snow leopard or I can directly install snow leopard?
DATA RECOVERY SOFTWARE - OR - DATA RECOVERY COMPANIES?
I shot a film this summer on RED ONE digital camera, and now BOTH of my Lacie 2TB drives in which we deposited the footage aren't working. I NEED to recover data.
In researching here and online, I've looked into software options such as Data Rescue 3 and Disk Warrior.
I've also investigated companies in which you mail the drive into them. Lacie themselves recommended a CA outfit called Drive Savers Data Recovery; I've also investigated On Track Data Recovery (the world's largest), and ESS Data Recovery. There's also Tekserve here in Manhattan.
Does anyone have any experience with any of these options/companies specifically? Huge differences in price; everyone seems confident, ESS the most realistic.
What is the best route to recover my film?
The drives have about 800 GB of film footage - in the form of RED's proprietary software - R3D file extensions, plus Quicktime proxies.
Here are the drive issues:
DRIVE #1 - My Master copy of film: my iMac had OS 10.4.11; the drive mounted no problem; I upgraded a few days ago to Snow Leopard 10.6.4. Now it doesn't mount. It's in Disk Utility but the volume line is greyed out. The Apple Store folks tested my iMac and my drive and said it's the drive. They said it was just a coincidence that the drive developed an issue at the same time I upgraded my OS.
DRIVE #2 - was initialized in a Dell laptop, but NOT formatted.
I'm asking this question for my brother. He has a 15-inch MacBook Pro (late 2011). He recently reinstalled OS X Lion but now every time he boots his computer he ALWAYS gets the option to chose Macintosh HD or Lion Recovery disk. I'm tech savy but I've tried resetting the PRAM and everything else I culd think of but he still gets that same screen. He is not pressing the option key when booting it just does it automaticlly. Should I do reinstall OS X Lion aain for him or just take it back to Apple and have them look at it?
Info:
MacBook
Pro, Mac OS X (10.7.3), 2.3GHz Core i5, iPhone 4S,new iPad
i just bought an early 2010 Macbook running OsX 10.6.8, all updates have been done. I cant seem to start file sharing, in the preferences window>sharing the window stays blanc. Also i noticed that the icon of sharing looks the same as the general preferences icon, normally this is a folder with a yellow mark on it.
Info:
MacBook, Mac OS X (10.6.8), early 2010 edition
I deleted my startup and recovery drives. I still have every thing on external hard drive but cannot get my drives back on internal drive. Is there anyway to get those drives back and get all my info from my external drive back on my computer?
Info:
MacBook Pro
How do I obtain a recovery disk for my Macbook Pro? None was supplied when bought
Info:
MacBook Pro, Mac OS X (10.7.3)
with my G5 I need to get a new hard drive since the old one died. to format the new hard drive do I need a start up disk or a recovery disk.
Information:
PowerMac G5
Mac OS X (10.4.10)
Dual Core 2.0 2x 256 Ram
I wanted to do a clean install and repartition my iMac running 10.8. It has 2 partitions. I booted from the recovery disk, went to Disk Utility and erased the two partitions. However, when I tried to change to a single partition got the error message "cannot unmount disk."Â
Info:
iMac, OS X Mavericks (10.9.4)
I just installed the Samsung EVO SDD in my Macbook Pro (mid-2009). I want to get into Startup Manager or Recovery Mode to restore my data. My main goal is to use my Time Capsule as my recovery disk. Â
So far I am getting a folder with a question mark everytime I boot into Recovery Mode (Cmd + R) and a white screen with the mouse cursor when I boot into Statup Manager (Option key). My last resort is to re-install my old HD and use a SATA cable.
If I log into Windows as a normal user (not administrator) and open the Boot Camp Control Panel, I'll be missing the Startup Disk pane. The only ones available are Brightness, Keyboard and Trackpad.
Is there any way to get the startup disk tab to appear while logged in as a normal user? I don't like the idea of having to run as an administrator all the time in Windows.
I get this question mark along with a folder when starting up. I tried holding down the option key when turning on the power and then I get an internet recovery along with a globe. I click on the arrow below it and it takes maybe 15 minutes to start up. Then i get this disk utilities screen. I'm now unable to do anything. When going into disk utility, disk 0 shows with Mac OS X base system underneath it. All the clickable buttons are faded out. Is there something wrong with the hardrive? and where could i get this fixed? There isn't a warranty on it.
View 1 Replies View RelatedLast week I finally upgraded from 10.6 to 10.7, but now my Mac Pro (2008) won't boot properly. It'll start to boot with the gray screen and the Apple logo, but then the entire screen goes gray and it just locks up there.  However, if I reboot and hold down the Option key to bring up the list of bootable drives that works fine. I've checked my Startup Drive settings and the proper drive is selected. why it won't boot on it's own anymore? Holding down the Option key is getting old.Â
Info:
Mac Pro - Octo Core, Mac OS X (10.5.6)
My original hdd refuses to boot up, and using disk utility via recovery mode to try and fix it just gives me an error "disk utility stopped repairing the drive, salvage data and format etc." giving an error about invalid node structure or something. Tried using target disk mode with a friend's mac when I was at work but the drive didn't even want to mount. Assuming it's about to die, I have just bought a new hdd (XT Hybrid) and since my mac is pre-Lion era (2010 model) I don't have a built in recovery mode, but strangely enough hooking up my old hdd with a dock and option-booting to it I can still access the recovery HD partition on it.Â
So I was thinking if i can essentially "clone" my original hdd to the new one using the restore tab on disk utility, and try using disk repair on it to get it working? or is there another app I can use that will do this (being mindful that I don't have access to another mac or the OS on the HDD to run it, so it'll have to be "live", and preferably free) Or should I just cut my losses and just put a fresh install on it... Yes I do have a time machine backup, but there's two reasons I want to see if this works - one is that although time machine is quite up to date (within a week I'm guessing, can't remember), it's obviously won't have the new content created during the day(s) before I was able to plug in my external hdd, and secondly since I don't have access to another mac to create a lion install usb drive, I'll have to use the internet recovery, and knowing my internet connection, 4gb download would take probably overnight and nearly a whole day to finish (assuming it doesn't drop out).Â
Info:
MacBook Pro, Mac OS X (10.7.3)
I wanted to install Windows 7 to my Macbook Pro Lion using Bootcamp. I opened Bootcamp Assistant, it told me first to make a partition, then to insert a disk. I tought what if i insert recovery disk of Win7 that left from another computer.. So I inserted it and it told me to install Win7 and there was no exit button or anything like that. I switched computer off then on again and it again started Win. disk and it wont eject ether. Then with some miracle I ejected it, restarted and it gave me black screen with "no bootable device, please insert disk and press any button". I thought it wont leave me till I install it, so I inserted the disk again, and tryed to install it. During the installation it asks me where it should be installed, I chouse disk marked as bootcamp, also I had to format it because it was in fornat (something three letters) and it needed to be in format (something four letters). Then Windows installed, it is also not registered (only 3 days) and I can access Mac OS, when restart - it starts like Windows. There is no drivers for anithing, I cant connect to the internet even.
Info:
MacBook Pro, Mac OS X (10.7.3)
