MacBook Pro :: Cannot Boot Into Recovery Mode After Installing New HD
Jun 17, 2014
I just installed the Samsung EVO SDD in my Macbook Pro (mid-2009). I want to get into Startup Manager or Recovery Mode to restore my data. My main goal is to use my Time Capsule as my recovery disk.
So far I am getting a folder with a question mark everytime I boot into Recovery Mode (Cmd + R) and a white screen with the mouse cursor when I boot into Statup Manager (Option key). My last resort is to re-install my old HD and use a SATA cable.
My Mac Pro main boot drive us encrypted. I booted into recovery mode the other day & it wouldn't let me boot back o my main drive. Now upon start up I can't enter either recovery mode nor safe mode nor chose the main drive to boot from. I'm absolutely stymied in what to do.
I'm on a 2008 model Mac Pro 8-core system for work. For whatever reason it doesn't have a recovery partition. I read that if I don't have a recovery partition, I can't make a recovery USB bootable drive....so how do I make one? And no, I cannot reinstall the OS on here, that would be beyond detrimental to what's going on here. (too many details to get into)
Alternatively, can I make one with my 10.8.5 MacbookPro at home and run it here on my Lion system?
I can not access the recovery mode. If I reset my MAC while holding "command-R" it just brings me to the desktop. If I reset holding "option" it will show me the HD but no recovery option. If I access the disk recovery from the desktop, any option to erase HD is greyed out. I have done all system updates and I can't access the internet recovery option either....
I'm planning on selling my Macbook tomorrow!
Info: MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
My macbook air running slow even on recovery mode when I press Alt + Power it takes me to Mac os Utilities the mouse barely moves, I erased every thing on the hard drive so I can install a fresh copy of mac os but I couldn't because every time I try to boot up from the USB that got the mac os it takes for ever to load the OS for installtion, and some times every thing freeze when I'm on the Mac os Utilities mode.
I am trying to reinstall the OS, and got into Internet Recovery mode, and got a list of Wifi networks to select, but my own was not one of them. I even clicked "Other" (or something like that) to enter the SSID and passphrase, but that was rejected. I am now piggy-backing on a nearby wifi, with all the risks that entails. Why won't my Mac see my own Wifi? (Everything else in the house sees "five bars", including my wife's Macbook Air and my iPhone.)
my macbook pro today started to freeze at logo scrren. I tried to start it up in both safe and recovery modes but it doesn't work either. I got the system to start in safe mode only once and the scrren looked like in the attached image.When I tried printing the screen instead of taking a photo with my mobile, the image appeared to be normal (without those noisy rectangles), but it wasnt. Then itried restarting but it's been impossible. As i said i tried booting on safe and recovery modes but the circle below the apple logo appèars and then it freezes again. I read about aproblem with the graphic card similar to mine in earlier models, I don`t know if it is the same problem.
Info: MacBook Pro (15-inch Late 2008), Mac OS X (10.7.4), 9400M/9600MGT
I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.
I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc".
I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy.
I think it is pretty unsafe to not have a password befor entering the recovery mode.Since one can reset passwords on even admin accounts how come there are no password requiret before entering Recovery mode? It is completly idiotic and totaly unsafe and an easy ways for f.i thiefs to wipe the computer for data.
i been wanting to re-install Mac Osx Lion for quite a long time now. But everytime i do so, the resolution for the Recovery mode is to big and i cannot select continue to re-install it because it is not on the screen. I have lost my Os, i have nothing else to do. I tried calling apple and they just gave me options for support, which gives no help for me.
Is there a way to backup to time machine within recovery mode? My machine is really hosed and will not stay up for more then a minute or so before the beach ball of death takes over.
I was going to do a reinstall, but it will not unless I wipe the disk. My existing TM backup is corrupt, so I can't use that after the reinstall.
My (apparent) only option is to backup from within the recovery mode, but it (apparently) only gives the option to restore.
after i ereas all of my HDD and I try to reinstall OS X it show " you have to download maverick.app from the app store " how should I do I have into this computer
I have Mavericks installed as the OS on a MBP 2011. I had some hangups with my encrypted harddrive. After using disk utility from an account to verify and repair the disk I was instructed to boot in recovery mode (by pressing command and 'R' after reboot). I've now used disk utility in recovery mode, the hard drive is repaired, but when I restart the computer I get a folder with a "?" on it that flashes. Very different from the password screen popping up within seconds after booting (since it's encrypted).
I also verified and repaired permissions and am wondering if that could have affected the order of things during booting. Since the HD is encrypted I know the password needs to be entered before system can use any of the information on it, including the OS.
I prefer the idea of not useing time capsule since I believe I'd need to repair the HD again. The idea of unencrypting after a backup and then encrypting after repair doesn't sound appealing either.
How do I reboot the system so I can enter the encryption password and allow the system to boot as normal?
So I recently erased my 2007 iMac through recovery mode. That process went fine. But when I went to go install the latest version of the mac OS (still through recovery mode) it comes back with a window reading basically that process I just did failed. I did this process many times, it doesn't work, and now at the moment I have iMac sitting in recovery mode and I can't do anything on it. Should I bring it into a store?
I did a bit of reading on the internet, and it looks like most computers will not boot into 32-bit mode by default with 10.6. It appears that if while booting the user holds the 6 and 4 keys, the computer will boot into 64-bit mode.
Does anyone know anything about this? Will the computer always boot into 64-bit mode if this is done once? Will it even make a difference? Will the average user want to do this?
If the internet is already active when i turn on my mac mini it goes into recovery mode though it will not let me click or hit "return" to utilize any of the recovery/utility options.
I am a mac newbie, but experienced linux and windows user. I am trying to restore my mac mini (mid 2011) running mavericks. The process should normally be very simple; press command-R keys while booting to start recovery mode and go from there.
Unfortunately my keyboard is a palm-sized keyboard without command or windows keys. So I am stuck. I have 2 windows laptops that I can use to remote login but I cannot do remote login during boot.
I tried mapping the Command key to Ctrl key inside OS X, but it seems like this only works after reboot.
I tried to use recovery disk assistant as it requires "Option" key, but the assistant does not allow me select the HD, as I guess I do not have a recovery system on the HD.
I tried doing network install, but it requires the install CD, which I don't have. I have an ipad and two iphones if it
i went into recovery mode and tried to repair my hard drive and it says it can't be repaired and I have to restore my computer. is there anyway i can backup my files from recovery mode onto a new disk?
After partitioning my hard drive, I was not able to boot up my computer. Currently it is stuck at the white screen when it boots up. I tried using the USB Recovery Disk to boot up however it does not seem like it is responding to anything
I pressed C while having the USB inserted I also tried pressing D to go in to the Apple Hardware Test nothing happened.
I also tried resetting the VRAM? It did beep and it reset however I still can't bootup
When I try turning the computer on, I get the option to choose the startup disk, but only Recovery is visible. When i check in Recovery, it still shows my original start up disk, but I cannot restart off that. What do I do?
Info: MacBook Pro (13-inch Early 2011), OS X Mavericks (10.9.3)
I tried reformatting while running Snow Leopard, but the option was grayed out and the install disc made the computer hang at the white bootup screen. I figured I'd just upgrade to Lion and do a clean install (not an option).
After upgrading to Lion, I booted into recovery to erase the hard drive. I did it and it took less than ten seconds (bad sign).
Now I can't get past recovery and the hard drive is still full.
Bought a used 2011 iMac. Wanted to wipe everything clean from previous user and install lion. After installing lion I went into the recovery mode by pressing apple r, then wiped the harddrive clean, and now am trying to reinstall lion over the internet. At first it was working fine, eta was 90 mins. When it got down to 4 mins it suddenly went back up to 90 mins and has been stuck there for 5 hours. The computer is not frozen since I can move the mouse and everything.
Running mid-2009 iMac with latest Mavericks 10.9.4.
DVD Player has been performing perfectly in Snow Leopard until this update to Mavericks.
I've tried resetting SMC/NVRAM. Reinstalled Mavericks 3 times. Tried dumping the plist too. That did nothing. I've re-set SMC/NVRAM...done the Permissions using Disc Utility.
I can get a DVD to load selecting the Recovery Mode StartUp disk. Then I reboot and the DVD plays fine using the DVD controls. But ejecting and trying it again - it won't play.
I just finished up a fresh install of Windows 7 and downloaded and installed the NVidia driver from their site directly since the one in the Boot Camp files is pretty old and technically the Vista driver anyway.
But I still need the Brightness, Sound, etc key functionality. Is there a way to selectively install Boot Camp drivers? That's the only one I need. The wireless, chipset, video and everything else works just fine (and in some cases better) than the ones included in Apple's setup.
Last week my macbook randomly froze, big time. I couldn't force quit any applications or even move my mouse on screen. So I forced shut down and then when I went to restart the computer, it wouldn't boot. I tried every boot mode: safe mode, from the install disk, resetting the PRAM, everything. The computer doesn't even show an apple logo, a question mark, or a spinning wheel - just a blue screen.I took it into the Apple store and the genius that looked at it told me that the hard drive had failed and needed to be replaced.I bought a compatible ssd from crucial and swapped the drives out. However, nothing has changed. The computer still won't boot in ANY mode, not from install disk or anything. I have no idea what to do or what could even be wrong with the computer at this point, because I have no way of running any diagnostics.
