MacBook Pro :: 15" Doesn't Start When Push The Power Button
Jun 22, 2012My new MBP15 doesn't start when I push the power button.Nothing happen ...
View 1 RepliesMy new MBP15 doesn't start when I push the power button.Nothing happen ...
View 1 RepliesI just installed 2 4 gb of ram in my unibody mac book pro 13"
I now get a error saying to push and hold the power button and then restart. The message keeps coming back up every time any thoughts ?
My iMac all of a sudden started to scroll down gray and then said I needed to restart. When I push the power button the screen lights up but the iMac just beeps. How do I start up?
Info:
iMac, Mac OS X (10.5.4)
I just went to start up my MacBook Pro with the power button but nothing happens.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
my brother is having a problem with his unibody MacBook that he bought just a few months ago. It won't start when the power button is pressed, the sleep indicator light turns on and that's all. There's no start up tune, and nothing appears on screen. I had a similar problem with my MacBook Pro. I was told that the logic board needed to be replaced due to too much dust or moisture. Could this be the same problem? and has anyone else here ever had the same problem?
View 2 Replies View RelatedA few hours ago i tried to turn it on but it only showed the apple screen for a few seconds and turn off automatically.. i can't turn it back on anymore..
It doesn't response to the power button nothing happen after pressing the button. I am sure it is charged... what should i do..?
Info:
MacBook Pro (Retina, Mid 2012)
This morning when the power button is pushed, nothing happens at all. The button does not light up. The computer does not start.I checked the power cable. I took it out of the computer and put it back in. (I did note that the plug looks a bit darkened but it does not smell burnt.) I tried it in a different outlet. Same thing. It won't turn on.I can't recall if this iMac is a G3 or G4 and I can't find my documentation to let you know. But I don't know that it matters which G it is. It is the old special edition grey iMac and has been working for us for many years.Is this the end for this iMac? Could it be something that is simple to fix?Â
Info:
iMac, Mac OS
X (10.2.x)
Does the macbook (the new one) have a push button battery indicator?
View 2 Replies View RelatedMy 1999 PowerBook G3 "Lombard" does not start when I press the power button. Is there a way to force it to start without it, or do I need to get a replacement button?
View 9 Replies View RelatedThe computer doesn't respond to the power button when pressed. (imac - no intel)
View 1 Replies View RelatedI recently purchased a Mac mini As you all know, the Mac mini has its power on button in the rear of the computer. Due to a stroke I am in a wheelchair and my right side is paralyzed. This means that I have to have my mother or brother turn on the Mac mini for me. Does anyone know of a push button type of device that I can use to power on, and off, my Mac mini? While "push button" would be nice, the powering on device can be a switch. I fully realize that I can leave the Mac mini running 24/7 which I do very often. However, during thunder storms I like to shut the Mac mini off entirely. I do not want to take any chances. I know of a few people (including me with my old Power Mac) who left their computers on during a thunder storm and their computers got zapped.
View 4 Replies View RelatedMy computer shows an upward facing arrow and makes a clicking noise when i hit the shift button, if i hold it down it switches into caps lock ... how can i get out of this mode?
Info:iMac, Mac OS X (10.6.8)
I've had a MacBook for nearly 2 years and recently convinced my parents to switch from a PC to an iMac. I've managed to get everything up and running with the exception of our scanner which is an Epson Perfection 1640SU.When I push the scan button on the scanner, the computer recognizes the scanner and comes up with a preview. I can make adjustments with the menus but I can not actually push the "scan" button because it is grayed out. I've attached a screenshot so people get an exact idea of what I'm dealing with.
View 3 Replies View RelatedI installed gmail on my verizon blackberry curve. I have gmail set to automatically receive my school email, (penn state university). The problem is, it take a long time to receive on my phone, it does not push it immediately. Additionally, gmail doesn't check it very often, I usually need to go into the settings and hit the "check mail now" button. Is this normal? I thought I would be able to get my emails immediately.
View 4 Replies View Relatedcomputer won't start. tried unplugging and holding in start button. After about a half hour and unplugging a few times, finally got it going. Imac G5
Info:
iMac, MacOS X (10.5)
I have a iBook G4 laptop and there seems to be something very wrong with it. It started a few days ago just randomly. I was reading something on the internet and the screen went black on me, but the power was still on (I clicked CAPS LOCK to see if there was power). I then proceeded to push the power button and the power went off. When I pressed the power button again to turn it on, it made that internal noise it always makes and then the fan came on, and wouldn't turn off. There was no picture on the screen at all. Completely dead. But there was power, because when I clicked on the CAPS LOCK, the light came on). I tried pressing on the power button for at least 15 seconds and even went as long as a minute, and the power didn't go off.
View 3 Replies View RelatedI added 2 sticks of 512 to my power mac g5 1.6. I had ahard time getting the computer to see the new ram, but finally was able to kinda get it working after zapping the pram. However my computer only saw these 2 sticks as 256, odd. So i attempted to troubleshoot the problem. I tried just installing the new ram, but the computer wouldnt boot. I tried a few different combos with the other 4 sticks i had, but nothing. I put the old memory back in, and still nothing. The power led looks to blink once every five seconds or so. I tried pressing the pmu reset button, but still the same out come. I also tried taking out the battery, nothing.
Information:
1.6 g5 single proc
Mac OS X (10.5.1)
I had a weird issue this morning. I started computer and it did not make the chime sound, it didn't do anything at all. I disconnected it from the extension cord as well as all the peripherals attached to it and nothing. I tried a different start up disk and again there wasn't a sound. Then i unplugged it and reset the SMU on the mother board and air sprayed the computer to remove all dust. Then plugged it back and it came back on.
Information:
Power Mac G5 Dual 1.8
Mac OS X (10.4.11)
I'm using a B&W Power Mac G3 with 512MB RAM and OS X Tiger for a SMB file server (with 5 users) and a USB printer server. Everything is working good, but I have a problem.
It doesn't have a monitor or keyboard/mouse attached normally (I can configure it via VNC). The problem is that I would like to be able to turn the machine off when it's not needed (like at night sometimes, days when I won't be home, etc.). I would like to just hit the power button and have it turn off, however it puts it to sleep instead.
Normally, sleep would be fine, except on the B&W, the fans still run, just the HDs shut off, so it's still noisy as heck.
Is there a way to make the power button shut it off? If not, any other easy methods of shutting it off you can think of? Via VNC won't cut it, as my dad needs to be able to turn it on (not a problem) or off as well.
i just got my new imac 2 days ago. I was wondering is there another to turn on the power without pressing the power from button? (cuz i remember u can power on from the keyboard b4)
View 7 Replies View RelatedI have just shipped my Mac Mini to its new home and I've had reports that the panic error is appearing on boot up: "You need to restart your computer. Hold down the power button for several seconds or press the Restart Button." This screen appears on the blue window just after the grey apple screen has disappeared and does not get as far as the desktop at the same point each time. We have tried to reinstall mac OS from the original install disk but holding the "C" Key or the "Option" Key down on restart doesn't boot from disc. Is there a way you can view the Kernel Panic log before you boot into Mac OS so we can try and pin point the source of this problem. I'm wondering if this could have been the result of the shipping that has caused some hardware to come loose.
View 3 Replies View RelatedWhen I press the start button there is a delay of 3-4 seconds before the computer turns on and the sign in screen appears. Then when I shutdown it takes up to 4 minutes to actually turn off the screen.
I also ran a diagnostic check and received the error code HDD/11/4000000:SATA (0,0)... What I do next?
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.1)
I still use this old PowerMac G4 (hopefully Apple builds a new MacPro soon!) and when not using it, it is in sleep mode.Unfortunately my cats like to touch the keyboard, thus waking up my Mac.Is it possible to wake the mac only by pressing the power button?
Info:
Dual 1 GHz PowerPC G4, Mac OS X (10.5.8),
My Macbook Was On And Working And I Tried To Hit The Power Button To Turn The Macbook Off And It Would Not Work....so I Shut It Down Using Computer Shut Down Under The Apple ....now It Will Not Turn Back On......it Has To Be The Power Button Itself....is There Any Where I Could Buy A Replacement Power Button? And Is There Any Other Way To Get It To Turn On Without Using The Power Button?
View 6 Replies View RelatedI have a white 2008 model MacBook. Due to some unfortunate tampering with the circuits under the right command key on the built in keyboard, a lot of the keys and the power button are now effectively dead. I'be ordered a replacement top case, but was wondering if I could, in the meanwhile, somehow turn the laptop on. I'd prefer to do this without opening it up, though I could if that's the only way. Â
I read in another thread, can't find the link now, that disconnecting the battery, connecting mains, then connecting the battery would turn it on, but that doesn't seem to work for me.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.4)
my power button is constantly pressed. While I was using my computer, the screen got black automatically after a few seconds.After I pressed ESC in order to get back to my desktop, after another few seconds, the window asking if I want to shut down / log out / reboot appeared...When I'm trying to boot my Macbook, after a few seconds, it automatically shut down, without warning, as if I was pressing power button for a few seconds to force the shutdown.I can boot if I remain a keyboard's touch pressed during all the booting process, like Maj, or Alt, but as you could imagine, it's not really easy to use a computer with a keyboard's touch constantly pressed....Â
By the way, I won't go to the Genius bar for a few reasons, first, this Mac is 5 years old, so I'd prefer buy a new laptop instead of paying a few hundred bucks in order to change pieces of this old Macbook, secondly, I don't have an Apple Store near my location.
why doesnt my green button at the top of my screen maximise my safari window?Â
if i drag it to how big i want it wen i go to a new page it becomes small again and the green button in the top left corner doesnt workÂ
Info:
MacBook Pro
i just bought a new macbook pro 13 inch and i cant get the question mark key to work. what key i need to press to get it working. both the english question mark button and the spanish question mark button on type out like this
Info:
MacBook (13-inch Late 2009)
Since the trackpad was not working, we have to use a USB mouse to navigate. After a few minutes, the mouse left and right button doesn't work. I can move the pointer around the screen and use the keyboard.
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.6.8)
My 15" early 2008 MacBook Pro won't shut down unless I hold the power button. I have done extensive searches and have done the following and the problem still persists. I have pulled the battery to reset the SMC or whatever it is called. I ran disk utilities and repaired the permissions. I deleted unnecessary files in the preferences folder...... still no go..... in fact it won't load software updates because it gets hung up.... then I have to force quit it by holding the power button..... I am at a loss.
View 9 Replies View Related