MacBook Air :: Good Thunderbolt Hard Drive For 200-300 Range?

Jun 26, 2012

What is a good thunderbolt hard drive for 200-300 range?

View 3 Replies


ADVERTISEMENT

MacBook Pro :: Is The New 13"MBP Good Enough For Mid Range Gaming

Apr 13, 2010

I'd like to switch from a hp dv6570el SantaRosa late 2007 (8400M with 128MB Ram). What I basically do with my laptop is:- emailing / surfing / etc- some development with Eclipse / start developing something for iPhone- basic audio recording- playing games (not at maximum rate.. I'm stuck with World of Warcraft.I don't think that the 15" MBP worths its price.Do you think that the 13" will be able to do this? I'm in doubt of the gaming, I don't want extreme performances, just something playable, and of course it will be better of what I'm using now.

View 5 Replies View Related

MacBook Pro :: Make External Hard Drive Hook Up To Thunderbolt Port

Sep 2, 2014

So I have 2 USB Ports on my Mac. I use both of them and I am looking to get a Mic for recording youtube stuff. I use one for my wireless mouse, and I use the other for an external hard drive because the amout of space on my Mac is no-where near enough for what I am going to use up. 

I am just wondering if there is a way I can either:

1. Get more USB ports (if its possible)

2. Hook up my mouse to a Thunderbolt port (again if that is possible)

or 3. Hook up my External Hard-Drive to the thunderbolt port. 

Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.2), I have 2 USB (3.0), 2 Thunderbolt

View 3 Replies View Related

Intel Mac :: Thunderbolt Dock For External Hard Drive?

May 31, 2012

I'm trying to find a Thunderbolt Dock for External Hard Drive.  One of these http://www.topbuy.com.au/tbcart/pc/External-SATA-Hard-Drive-Docking-Station-USB- Interface-937p3180.htm 

But with Thunderbolt connector instead of USB, Firewire, eSATA etc.  

Do these exist?  The only thing I could find close is the Seagate Go Flexi Adapter, but that only works for those drives.  

Info:
Mac OS X (10.7)

View 4 Replies View Related

Intel Mac :: Can Use A Thunderbolt Storage Hard Drive With Late 2009

May 11, 2012

Can I use a thunderbolt storage haqrd drive with my late 2009 iMac?

Info:
iMac, Mac OS X (10.7.4)

View 4 Replies View Related

Final Cut Pro X :: Sees Thunderbolt External Hard Drive As A Camera

Jun 27, 2014

FCPX (latest version) recognizes my external hard drive (my book 4TB) as a camera. Didn't dave this problem before, so when I'm importing to my project the the hard drive is listed as a camera and the program starts to scan through all files! this means that the ram memory is filled i no time! Is it something in my settings or is it the new version of fcpx that is playing tricks on me (not supported had drive?)

View 2 Replies View Related

IMac :: Recommend A Good External Hard Drive ?

Nov 22, 2009

I am thinking about getting the iomega ego

View 24 Replies View Related

Hardware :: Looking For A Good Recommended External Hard Drive

Jul 20, 2010

Can anyone recommend a couple of good, reliable external hard drives?

The first one I'm looking for is a desktop USB/ESATA/Firewire drive and the other one I'm looking for is a NAS drive to use as a server disk.

Haven't got much to spend but want reliability over cheapness.

View 9 Replies View Related

OS X V10.5 Leopard :: Can Someone Recommend A Good External Hard Drive

Jun 11, 2012

I am looking at getting an external hard drive ...but before that, someone suggested i could use the second internal hard drive...but how do i find out if i do?If i don't, can someone recommend a good external hard drive?

Info:
iMac, Mac OS X (10.5.8)

View 2 Replies View Related

Intel Mac :: Good Hard Drive Repair Program?

Jun 15, 2012

IM HAVING PROBLEMS WITH AN INTEL BASED IMAC. MY PROBLE IS I GET FREEZES AND BLOCKS ON THE SCREEN FROM TIME TO TIME. IS THIS A HARD DRIVE PROBLEM OR WHAT ?

View 5 Replies View Related

OS X :: 7 Pass Secure Erase - Good Enough To Return Hard Drive?

Jan 16, 2009

So I may have one of the Seagate hard drives that are failing badly. Haven't heard back from Seagate to see if my drive and firmware is bad, but since I just bought the drive, I'm thinking of returning it.I'm in the middle of a 7 Pass Secure erase on it (1TB). Do people feel comfortable returning a drive after doing that erase? Or should I just forget about it and destroy the drive and chalk it up to a loss?

View 20 Replies View Related

Hardware :: Replacing Hard Drive - Any Stock Model With Good Speed

Jan 31, 2009

I have an old white Macbook, the 512 Ram, 60 GB Hard drive model, 2.0 Ghz. I'm currently upgrading my Ram to 2 Gb, can anyone recommend a relatively inexpensive model replacement for the stock drive with good speed. I'm currently shopping on Newegg and I have no idea what I am looking for.

View 14 Replies View Related

MacBook Pro :: Thunderbolt Port Not Working With Lacie ESata Hub/Sonnet Express 34 Card Reader Thunderbolt?

May 9, 2012

I have a MBP 2.66 GHz Intel Core i7 and have tryed to connect a Lacie Thunderbolt eSATA Hub to the Thunderbolt port.  

1 Will it work with the Thunderbolt Display port? 

2/ Why won't it see and Thunderbolt devices in the Systems Report? 

Info:
MacBook Pro, Mac OS X (10.7.3)

View 4 Replies View Related

MacBook :: Connecting A Thunderbolt Drive To White?

Jun 14, 2012

How can I connect the LaCie 2Big Thunderbolt drive to my white MacBook? Having a hard time locating a Thunderbolt to USB cable (do they even make it?). Link to the hard drive [URL]

Info:
MacBook (13-inch Mid 2010)

View 2 Replies View Related

MacBook Pro :: After Restoring Files To Reformatted HDD / Use New Thunderbolt Drive For Time Machine

Jun 24, 2014

I have the latest MacBook Pro Retina 15 with 16gb of RAM but am having problems with one of my external HDDs (1TB LaCie Rugged USB 3.0/2.0).  I was using 500GB for Time Machine and that seemed to be working well but when trying to write to the other 500GB I have been getting write errors with some files of late. 

I have now bought another LaCieRugged Thunderbolt 1TB HDD and want to copy files from the 500GB partition (non-TM) to that before doing a complete reformat of the now 2 partition drive(1TB LaCie Rugged USB 3.0/2.0).  Then after restoring the files to the reformatted HDD I want to use the new Thunderbolt drive for Time Machine. Any free/non-free 100% reliable backup software.

View 5 Replies View Related

MacBook Pro :: Audiable Click Sound Of Hard Drive / Protection Of The Hard Drive Dropped?

Sep 1, 2009

Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.

I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.

View 5 Replies View Related

MacBook :: Migrating Contents Of Hard Drive To New One / Hard Drive Has Partition For Bootcamp?

Jul 27, 2009

I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?

If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up

View 1 Replies View Related

Intel Mac :: Thunderbolt Drive Not Mounting?

Apr 30, 2012

Just bought the new Seagate GoFlex Thunderbolt Adapter and the Apple Thunderbolt cable. Upon connecting I get this console log: 

30.04.12 17:18:00,000 kernel: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 1 unplug = 0
30.04.12 17:18:02,000 kernel: [ PCI configuration begin ]
30.04.12 17:18:02,000 kernel: PCI configuration changed (bridge=25 device=5 cardbus=0)
30.04.12 17:18:02,000 kernel: [ PCI configuration end, bridges 14 devices 18 ] 

But the drive isn't showing up in finder AND disc utility. If I unplug the SATA connection between drive and adpter and plug it back in, the drive shows up. 

Problem is: This way i cant't use it as startup volume, as the drive isn't mounted during startup. 

Problem 2: Booting with the cable connected (internal startup volume this time) isn't possible either, as the wireless keyboard and trackpad aren't working after startup. I can see my desktop but mouse pointer and keyboard aren't working. After power off and unplugging everything boots up normally. 

Info:
iMac, Mac OS X (10.7.3)

View 3 Replies View Related

Mac Pro :: Thunderbolt Drive Not Properly Ejected

Dec 7, 2014

I have a new Mac Pro and a new LaCie thunderbolt 2 drive. At irregular and unexpected moments the message appears 'drive not properly ejected'. Sometimes the icon is still on the desktop, sometimes it disappears. Nothing works, unchecking sleep boxes,using other thunderbolt port. Is it a Mac Pro issue or a LaCie thunderbolt issue? It is a huge problem of course.

I bought the LaCie drive from Apple. Which one should I return if necessary, the Mac Pro or the LaCie drive?

Info:
Mac Pro (Late 2013), OS X Yosemite (10.10.1)

View 5 Replies View Related

MacBook Pro :: Cloning Entire Hard Drive To An External Hard Drive

Mar 31, 2012

Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.

View 1 Replies View Related

MacBook Pro :: After Installing New Hard Drive - Previous Hard Drive Is Failed

Sep 9, 2014

Macbook Pro 17" Early 2011 

Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously.  I am wondering if this is a compatibility issue as others have pointed out.  

I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.

Info:
Mac Pro

View 5 Replies View Related

Mac Mini :: Stopped Recognizing Thunderbolt External Drive?

Apr 4, 2012

I bought a Mini just a couple weeks ago and a LaCie 2big Thunderbolt drive. It's been working flawlessly, but today it doesn't recognize the drive and doesn't recognize even having Thunderbolt support and I can find nothing on Lacie's site or Apple's regarding this issue.

View 1 Replies View Related

Intel Mac :: Computers Connect To The Same Thunderbolt Drive Simultaneously?

Apr 25, 2012

Or do I need to setup a server?

View 3 Replies View Related

Mac Mini :: Access Imac Cd Drive Through A Thunderbolt Cable?

May 1, 2012

I don't have a CD drive for my mac mini and am wondering if I can access my imac cd drive from my mac mini through a thunderbolt cable?

Info:
Mac mini, Mac OS X (10.7.3)

View 1 Replies View Related

IMac (Intel) :: Will Not Recognize Thunderbolt Drive Running OS X 10.8.5

Aug 28, 2014

I have a 21.5" late 2009 iMac with thunderbolt 3.06 GHz Intel Core 2 Duo, 4 GB 1067 MHz DDR3, Nvidia GeForce 9400 256MB, running OS X 10.8.5 

Brought a new 4TB thunderbolt G-Drive. And, my iMac doesn't see it and the hard drive doesn't even power up. Tested at Apple before I brought it home.

View 2 Replies View Related

Final Cut Pro X :: 10.1.3 - Backing Up Project To External Thunderbolt Drive

Aug 25, 2014

I used SuperDuper to back up a project to an external Thunderbolt drive. The files are all there on the external drive but the references are still directed to the original drive (an external USB 3.0 drive). 

I tried changing the locations of all files and then consolidating, but it still references the original drive. If I eject that original drive and just start FCPx from the copy on the Thunderbolt drive I just get a lot of "missing file" red flags. 

How can I fix this?  I would like to avoid doing a "duplicate project" every time as the project is over a terrabyte and it takes a long time to copy. SuperDuper only copies the files that have changed.

Info:
Mac Pro, OS X Mavericks (10.9.4), The new Mac Pro

View 8 Replies View Related

MacBook :: Transferring Data From Old Hard Drive To New Hard Drive?

Sep 11, 2009

I'm replacing my old 120gig hard drive with a new 320gig hard driveWhen Ive got the new hard drive installed can I just put the old hard drive in a enclosure kit/caddy and copy my music/movies/etc across to the new hard drive?Or do I have to copy the data off before I remove the old hard drive?

View 3 Replies View Related

Hardware :: Hard Time Selecting Good Desktop Speakers For IMac

May 4, 2009

I'm looking at getting some good quality speakers for my new iMac. My budget is up to about $250. So far I've auditioned the following speakers;

1. Logitech Z2300. These sounded boomy and mushy to me. They are a good value though at around $150.

2. Bose Companion 3. I like the little hockey puck remote unit. They sounded very weak on mid-range. Surprisingly good low end output though.

3. Audio Engine A2. I really, really, really like these speakers. Until I play something with a lot of low end in them, then they just start farting because they can't handle anything under 100 hertz very well.

What I would really like to do is get the Audio Engine A2 and pair them up with a subwoofer at a later time, but in their short sightedness Audio Engine didn't put line outputs from the A2 so from what I can see there is no way to get them hooked up to a subwoofer.

View 4 Replies View Related

MacBook :: NAT And Xbox 360 - DNS Range

Sep 10, 2009

Right now to connect to Xbox live like this
~wireless = ethernet
Actiontec router/modem(verizonfios)~~~~~~ macbook=====xbox360

Right now my NAT is set to moderate and I am trying to open it. I've tried opening ports but there are so many IPs/computers in the network settings I feel like it might be interfering. Another thing is that I manually set my ethernet ip to 10.0.0.1 and my xboxs ip to 10.0.0.2. This is obviously not one of my ISPs IP adresses so should I change it to one that is in the DNS range?

View 1 Replies View Related

Hardware :: Recover Data From Dead Lacie Hard Drive / Unable To Mount Hard Drive

Sep 6, 2009

Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.

Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.

Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.

I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved