Mac :: Windows XP BootCamp - Four Additional Megabytes Required Error
Mar 7, 2009
I have the Windows XP SP1 disk that came with my old computer. I know that OEM disks don't work, but i successfully install Windows onto bootcamp every time i try, and it works perfectly. The only thing is, I can't install the bootcamp drivers which let me access wifi because i don't have sp2. I can't slipstream, because the disk has updates integrated inside of it, and whenever I try to install SP2 from the sp2 install file i dl'd from the microsoft site, it always gives me a "4 additional megabytes required" error. I added 5 gigabytes. and it still has this error.
View 1 Replies
ADVERTISEMENT
Aug 24, 2009
I have a 15-inch MacBook Pro, the new unibody ones, and I installed Windows XP, using BootCamp.
I made it a 29 or so GB partition, so it used the FAT32 formatting.
The program I tried to install is the eyeQ speed reading program, and the laptop exceeds every single one of the recommended requirements.
The problem comes when I am attempting to install the program, I keep getting an error message in which it says "This program cannot run on a computer with less than 64 megabytes of ram."
Last time I checked my laptop has 4 GB of ram, and it says the same thing when I checked it while running Windows XP.
My only guess, which I made while typing this, was that I should have formatted the Windows partition using NTSF.
View 13 Replies
View Related
Jun 4, 2010
I have imac 24. There is a small window that popped up and says,"Additional software is required for quicktime to playback this media. It may be available from the quicktime components page. Make sure your internet connection is active, then click the continue button to check for the software."The problem is is that I am not trying to use quicktime and nor is it running currently AND when the cursor is over the window it just spins the color pin wheel. This window will not go away. I cannot drag it, close it or press continue on it. I have cleared all cookies, cache and reset safari and nothing works. I restart my computer and it is gone for maybe a few minutes and then it reappears .
View 4 Replies
View Related
Apr 7, 2012
I've a brand new Macbook Pro with most updated Quicktime on it plus just downloaded Perian - and still it won't let me open up a dang simple m4v.
Info:
Final Cut Pro X, Mac OS X (10.7.2)
View 1 Replies
View Related
Jan 31, 2012
I'm trying to work on compiling a "family video" with clips from my siblings. They all use PCs and I'm the only Mac, but they're sending me Mpeg files that I can't open. I get a notification that I need "additional software" in order to open those files and get them working in iMovie.
Info:
iMac 2.66/2/500 and MacBook 2.4/2/250 and iPhone 3GS, Mac OS X (10.5.8)
View 4 Replies
View Related
Aug 31, 2010
So my iMac came with a 1TB hard drive and I installed Windows 7 x64 but only gave it some 93GB. I have a two-prong question:
Can I add a third partition to my drive after I partition for BootCamp? My main partition ("Macintosh HD" by default) is over 900GB large and I'd really like to cut that up into 2x450GB, for example, in addition to the 93GB BootCamp partition.
Second, once partitioned, is it possible to resize the BootCamp partition to make it bigger after it has been set up?
View 1 Replies
View Related
Jan 22, 2010
A question about windows 7 and a Mac pro 3.1 edition 2008. I have installed windows 7 and all is fine and dandy everything works, except in the bottom right hand corner there the error flag showing on the tool bar.
This is the error.
Apple Memory Controller GPE event is not compatible with windows 7.
View 1 Replies
View Related
Nov 16, 2008
i'm having trouble with some QT that I try to open. When I open the file, I get this message saying:
"Additional software is required for QuickTime to playback this media. It may be available from QuickTime Components page. "
I click [Continue] and it takes me to this page, which is a bunch of downloadable QuickTime Components. I don't know which component to download to fix my problem!
I guess there's one more thing that will probably help resolve this problem... I don't see any video just heard audio
Also, I am currently running:
QuickTime Pro Version 7.5.5 (249.13)
I selected the Movie Inspector? at "format" the info says:
Uncompressed 10-bit 4:2:2, 720 x 486, Millions
IMA 4:1, Stereo (L R), 48.000 kHz
View 1 Replies
View Related
Oct 3, 2010
my parents iMac 20" Core Duo is having issues. After bootcamp restarts the system I get an error on start up, a folder with a question mark shows up aswell as that prohibition logo How can I install Windows 7 on that machine?
View 7 Replies
View Related
May 17, 2012
Since I updated my Mac Air software, I keep getting a message about "additional plug required." Then when I click on download, I get the message that no plug found.
View 2 Replies
View Related
Sep 30, 2010
I am having trouble loading window XP pro OEM sp2 using Bootcamp on my macbook OSX 10.5.8 It gets through copying all the files and reboots successfully through to the install window and the setup program for windows (where it displays various marketing info and has dot buttons down the left hand side). It says it will take 39 mins to setup but the counter never changes and I have left it up to an hour and nothing happens although once I did get a disk error message (something about cleaning the CD - can't remember exactly). I am doing full installs and have tried FAT and NTFS. At first I thought it was because it was an OEM but it is a Microsoft OEM and other people online seem to have no problems and do not seem to get as far in the install if it is that. Is this a dud CD or version of windows or am I just doing something wrong?
View 2 Replies
View Related
May 2, 2009
I have started a bootcamp installation on new (updated) mbp. During the install, windows-installation makes a critical error and says that the installation cannot continue.
I managed to eject the disk by holding down the mouse button, but my problem is that the mbp starts up in the corrupted windows installation and stops again. I'm in an endless rutine where I cannot boot in Leopard again.
I'v tried to give it the Leopard installation disk but it's beeing ejected. How do I get pass bootcamp and into OS X again.
View 3 Replies
View Related
May 13, 2009
I have a new IMac and I installed vista via bootcamp, when I start up vista I am getting a blue error screen that flashes so fast i cant even ready it... then the computer shuts down. When I restart it again it goes to the page that gives me the choice to safe start or start normal. Sometimes it will let me go to windows and work fine but there have been times when it just does that over and over again. Does anyone know what this is caused from? I guess I'll have to reformat or something. If I continue to use my computer this way will it wreck something?
View 12 Replies
View Related
Jun 27, 2009
I'm trying to bootcamp Vista onto my mac so that I can play Diablo 2 since it won't run on my macbook white (2.4GHz). Anyway, I have a legit CD for Vista that I used to install it however when I was selecting the partition to use I got the message that "Windows cannot be installed on this partition as it is not NTFS" or something in that general wording. So, is there any way to create a bootcamp partition as NTFS or is it possible to run Vista on a non NTFS partition.
View 2 Replies
View Related
Jun 30, 2009
I put a new HD in about 4 months ago, and I'm trying to partition bootcamp and got this error message.. Do i need to Reformat my HD?
View 4 Replies
View Related
Oct 19, 2009
I first installed Windows XP when I got my early 2008 Mac Pro. Boot Camp was probably beta back then, but I cant say my experience has changed much through Vista 32 bit or now Windows 7 64 bit. The way to dual boot, holding ALt during boot, has worked 1/10 times. Literally. The boot symbols are usually delayed, so I know when I choose the win partition, it gives me the "No bootable device" error. Two times have I had heavy OS X crashes after these boot-up "games". This last time I had to completely reinstall OS X (or upgrade to SL). How could this be, im not even booting into OS X when I am trying to boot into win.
I even have a separate hard drive for my Win partition. Not to mention the stream of driver issues you encounter when you finally manage to get inside Windows. I actually had my apple wireless and mouse working in Windows 7, but then I installed Boot Camp drivers of the DVD, and now theyre dead. I know. Its Windows, why would I miss it? Gaming or apps, regardless. Apple shouldnt include a program that functions so poorly, if they insist on higher standards elsewhere. It only reflects badly upon them. I consider myself a decent level mac user, venturing into command line troubleshooting if needed. But BootCamp remains a mystery to me.
View 9 Replies
View Related
Jan 25, 2010
I have tried to install windows on my mac and bootcamp says files can't be moved, I haven't got a problem with reinstalling my mac provided someone can tell me if it's possible using a backup from time machine and the process needed please. I've no idea whether it will work and I want to be 99.99999% sure before I do anything as I have important work on my mac which I can't afford to loose.
View 5 Replies
View Related
Aug 21, 2010
I have a Macbook (from 2007) running Tiger OS X 10.4.11. I am trying to install BootCamp onto the computer, but Tiger did not come with Boot Camp installed. Because of this I had to download Boot Camp 1.3 Beta. This is old, and has expired, but I changed the system date to be 2006 and this has made it work. When I am partitioning the disk, this message comes up: Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again. I have already Backed Up and the computer is already formatted as Mac OS Extended (Journaled), but this message still comes up. Disk Utility has Greyed out the Erase section for Macintosh HD so I cant re-format it.
View 3 Replies
View Related
Oct 29, 2009
I have recently downloaded a copy of Windows 7 on my macbook pro in attempt to bootcamp it so i can play more games. everything went well until it booted to windows installation. from there i clicked start installation and it gave me two choices either to Update it or Customise it. I first chose Update but it didnt work. I then tried customise, and found out that my partition wasnt in NTSC(or whatever) format. So i stop my attempt to install it and tried to go back to mac. I could not go back to mac. i dont know how. I'm stuck there with the installation disc in the drive. I cant go forward with the installation and i cant go back. I finally figured how to get the disc out, and i thought that if i install the Mac OS X again it would fix things so i insert a Leopard installation disc. I was Completly wrong, and now i am stuck at a black screen telling me to insert an installation disc with the Leopard disc in side. I cant do anything now .
I need help please, any valid solution will be appriciated.
THanks in advance
View 5 Replies
View Related
Apr 5, 2006
When partitioning so that I can install XP, bootcamp claims that specific files cannot be moved, making it so that I am unable to install XP. It then orders me to ~gasp~ back my files, and reinstall OSX. Anyone else have this error message? I wanted a 14GB partition, and that would leave about 16 additional gigs free on the OSX partition
View 24 Replies
View Related
Jan 15, 2008
To make a long story short, I cannot get past the stage in the Boot Camp install process where you make a partition on the hard drive for Windows. I get this error message: The disk cannot be partitioned because some files cannot be moved. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again. I do not have a removable hard drive to back up my data on. I've got two flash drives that I put my most important documents on but that's it. I can use my IPod Nano to store my ITunes library until this gets figured out.
The only data I would really lose would be my firefox information, though I did get the book mark history, my video game saved data (4 games), and programs like Word 04, Flip4Mac, and other miscellaneous gadgets. I have already shelled out $80 for the Leopard upgrade and $120 for XP. I have no other need for a removable hard drive and as such I will not buy one. I just got off the phone with Apple Tech Support, one hour of it, and after trying repairing disk permissions and other Disk Utility functions we got nowhere. I tried booting from the Leopard disk and doing the same Disk utility repair/repair permissions to no avail.
Varying the size of the partition had no effect. I tried wiping the free space on my hard drive via Disk Utilities and that did nothing. I have plenty of room on my hard drive, it's 120GB and I have a shade over 60GB remaining. The information on "Mac HD" is as follows:
Mount Point :/Capacity :111.5 GB (119,690,149,888 Bytes)
Format :Mac OS Extended (Journaled)Available :62.4 GB (67,002,867,712 Bytes)
Owners Enabled :YesUsed :49.1 GB (52,687,282,176 Bytes)
Number of Folders :135,138Number of Files :623,284
During the rebook with the Leopard CD, there were apparently some disk permission errors. During the repair permissions process it appeared they could not be repaired but were modified or something to that effect. I just ran another -verify disk-verify disk permissions-repair disk permissions and these errors did not show up. A subsequent attempt at partitioning failed. I was directed to call tech support tomorrow AM and am supposed to ask for someone in 'Tier 2', but I'm hoping someone has some ideas that do not including wiping my entire hard drive and starting from scratch. Particularly since I don't know if that will actually work
View 6 Replies
View Related
Aug 5, 2009
I bought this mac last year and decided to put a windows partition on it. I decided the partition was way too small so I erased it and made a new one. This time when I went to make a partition on my hard drive it said the beta had expired. I looked deeper into this message and some sites said to put your clock was to before September of 2007. Doing so I now get this message. Bootcamp assistant cannot open. This version of Boot Camp Assistant is not supported in Mac OS X v10.5. Use Boot Camp Assistant 2.0, located in /Applications/Utilities/. Well first I don't have a boot camp 2.0. So I downloaded the combo pack to make sure my firmware and such was up to date which it was. I still get this error message.
View 4 Replies
View Related
Apr 22, 2009
I have an alu iMac with a 500GB HDD. There is about 200GB free. Every time I run the Bootcamp Assistant, choose a Windows partition (doesn't matter what size), it sits with the progress bar spinning for ages before it gives me the error "Disk could not be partitioned as some files cannot be moved. Please reformat the disk and try again". There is no way I can back the disk up, reformat, reinstall and re-update everything. No other apps are running when I run the Bootcamp Assistant.
View 9 Replies
View Related
Jun 19, 2009
I have a 13" white macbook, which I had partitioned with Bootcamp. When I decided to upgrade to a 500 GB drive I didn't want to reinstall everything, so after ordering and installing my new harddrive, I used super duper to clone my mac volume onto the new drive. [URL]. It worked like a charm for the mac volume, but did not copy my windows volume. No problem, I figure, I will just run the boot camp assistant again, b/c I didn't have that much on that volume anyway. However when I booted up in my new 500 gb mac drive, the Boot Camp Assistant would not work and generated an error message stating. "The startup disk cannot be partitioned or restored to a single partition. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
Only problem is, my drive was already formatted as an extended journaled volume. I erased it and reformatted and recloned from super duper just to double check, but still got the same error message. Then I tried to start from scratch, and erased the drive again and tried to install an operating system from the dvd. I got another error message saying that the hard drive could not be partitioned and that I needed to use disk utility to reformat the disk as a GUID partition. However I couldn't figure out how to do that, and couldn't find anything on the disk utility that said GUID. it took a call to mac support (thanks mark!) to figure it out. Thought I would post it here in case anyone else has the same problem. It turned out that the hard drive I'd ordered was somehow not set up the way as my old one.
The solution was:
1. boot from the mac os DVD
2. go into disk utility, select the new hard drive, and choose the partition tab
3. change the number of partitions from "current" to "1"
4. then the 'options' button becomes available, and you can go in and select to format as a GUID drive.
from that point on, I was able to proceed with installing Mac OS x, install all the software updates, and run the boot camp partition.
Once I had the hard drive partitioned properly I used Super Duper to clone my mac volume onto the new drive, and then used Winclone to clone the windows drive. for some reason the main site for winclone is down right now - two canoes - but I got a working copy here: [URL] none of the help info on two canoes was available yesterday or today either so I had a little trouble figuring out how to use it. (though others have said it's super easy...). I wasn't sure where to save the disk image, on a mac or windows volume and on my old or new drive. The way I ended up doing it (that worked) was:
1. open winclone, and in the 'image' tab, create an image and save it on the mac volume of the new hard drive. (I couldn't save it on the old drive b/c there wasn't enough room)
2. then, still in winclone, go to the 'restore' screen and restore from the mac volume of the internal hard drive to the windows volume.
View 1 Replies
View Related
Mar 5, 2012
My Macbook Pro would not boot into Lion boots into bootcamp no problem, with Lion it tries than the MBP shuts down, so I decided to try and clean install Lion, I tired both with internet recovery and with a bootable DVD I made with the Install.dmg file. Both methods gets to the end where I get an error saying cant install additional components.
View 14 Replies
View Related
Jan 3, 2011
I keep getting the following error 3 quarters of the way:
STOP: C000021A "Fatal system error. The windows subsystem process terminated un expectedly w/ a status of OX C000005. System shut down. It's a blue screen with white letter.
I'm using Office XP Service Pack 2 with imac OSX Install DVD version 10.6.3.
The steps I'm taking are:
Log onto my mac and use pre installed bootcamp to partition the drive. I'm using 32GB of space. Then I use my xp Prof w/ service pack 2 cd to install xp. At this time everything is working fine except for the missing drives. Then I put the bootcamp cd that came with my imac into the iMac and run bootcamp. It looks like everything is working perfectly. The imac is finding wireless internet and all the drives look like they are working fine until out of no where a blue screen pops up and states what I wrote below. There is nothing else on the screen. I'm using a 27 inch imac that i bought about 5 weeks ago new.
View 6 Replies
View Related
Apr 15, 2012
Just installed Telestream to open wmv files, but still getting error message that required codec is not available
Info:
Mac OS X (10.7.3)
View 2 Replies
View Related
Sep 15, 2009
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
View 4 Replies
View Related
Jul 9, 2010
I have recently began using linux as a virtual machine and have started to like it alot. I want to triple boot my mac so I can run linux by itself, but I'm running into some trouble. After partitioning my hard drive, whenever I try to boot up windows, it fails, and a get a blue screen and an UNMOUNTABLE_BOOT_VOLUME error. I have my windows partitioned as FAT and its Windows XP. I have already attempted to repair permissions for Mac and repair disc for Windows.
View 5 Replies
View Related
Mar 14, 2012
I need to make a PDF file under 3 megabytes. On my old dell computer, I had a program to make the file size smaller to fit a website's requirements. I love my mac and would love to use it better.
View 6 Replies
View Related
