I am now shopping for a new internal HD of MAC G5; previous HD died. I have decided on a Western Digital and was about to order one when I became alarmed by the SATA II listings. Is there a difference between SATA and SATAII that I should be concerned about the comptability? Don't want to get it and find out it doesn't work!
View 3 RepliesI have a 13" MacBook Pro 2011, 2.3gHz, 320GB. What connector does it have? And would SATA still work with my laptop? One more question, what are the exact dimensions of the hard disk drive bay in my laptop, the manual only says 2.5".
Info:
MacBook
Pro, Mac OS X (10.7.2)
I have a MacBook Pro with a 128GB solid state. Is this SATA II or SATA III?
View 3 Replies View RelatedIm considering purchasing a higher capacity internal hardrive around the 750Gb/1Tb mark. However my macbook is the early 2008 model, and it seems the majority of hardrives are SATA II, having speeds of 3Gbt, which my mother board may not be capable of (apparently only 1.5Gbt) From researching and reading some reviews of others who have purchased internal drives on Amazon UK, some have had difficulty due to this problem, but have been able to fix the issue with a firmware update reducing SATA II drive speeds to 1.5Gbt.
Questions I have: Do all SATA / SATA II internal hardrives need a firmware update if replacing on to a new computer?(If so, would I need to look for a specific firmware update for the specific drive I intend on buying? And if you're in the knowledge would you mind posting links to these updates?)What is the process of updating the firmware i.e. would I need to put firmware on external usb hardrive 1st, then upload it to macbook after installing new internal drive (if it boots up my OS that is) etc. Would a 'hybrid' (disk+solid state) drive be compatible with a macbook as old as mine?Do I need to update my operating system to OS X Lion first, or can it be done after installing the drive?
my current laptop hardware:
Macbook Pro 15.4" (Early 2008 Model)
Intel Core 2 Duo 2.4Ghz ProcessorGeForce 256Mb 8600M GT Graphical Processor
Intel ICH8_M AHCI 1.5 Gbt MotherboardToshiba MK1655GSXF 160Gb 2.5" Hard DriveOperating System: OS X Leopard 10.5.8
Info:
MacBook Pro, Mac OS X (10.5.8), 15.4" 2.4Ghz (Early 2008 Model)
I'm looking for a new HD to replace the original, now failing Maxtor drive in my G5 tower (1.8 Ghz dual processor, purchased in Aug. 2004), and have just about settled on the Western Digital Caviar SE16 series. It seems there are two types -- SATA and SATA II -- and I'm not sure about how to make a decision on which particular WD model to buy.
Will either type work in my machine? Or would the SATA II have potential compatibility problems? I read somewhere in these forums that someone with a G5 had bought an SATA II drive, and it wouldn't run with his system. (He said he had to reset some jumper switches to reduce the transfer rate of the drive ??, but now I'm told elsewhere that SATA drives don't have jumper switches.
Information:
1.8 DP G5, 1.5 GB RAM w/ Superdrive
Mac OS X (10.3.x)
Windowz wont recognize the two hidden Sata ports, so i'm currently looking to buy a Sata to Pata adapter.
So... willl there be a major performance hit with utilizing PATA for Blu ray burning and viewing?
I have ordered my first Mac, a Mini 2.66Ghz and I will put a Intel X25-M SSD in the machine to speed it up further. I hope I will be pleased with it
However, the question I encountered was whether the sata connection in the Mini is SATA-150 or SATA-300? Does anyone know?
I see Seagate & WD have announced these but I'm struggling to find many available to order. Only the WD Green one appears to be even offered as an internal option. What is more it is more expensive buying the internal drive than buying the external USB one.
Has anyone bought one of these externals and stripped out the drive to put in their Mac Pro? I'm running out of space on my 1.5TB and swopping to 2TB hardly seems enough.
I was wanting to install a Blu-ray drive in my Mac Pro to play movies in bootcamp on my ACD (I know it doesn't have HDCP).
What I was wondering if any one had installed a SATA Blu-Ray drive using an IDE converter and if that works alright?
It's about time to replace the original HDD in my late 07 SR MBP
Was wondering if anyone has put a SSD in one of these laptops with a 1.5Gb bus, and what your experience has been.
I'm debating between a SSD and a Hitachi Travelstar 500GB HDD
My G4 MDD (1.25 CPU, 2G RAM, OSX 10.5.8) needs a new drive.
I'm told SATA drives are the thing to get.
I don't know what a SATA drive is, or whether it is compatible with my machine.
Recently I tried installing a 2.5" SSD in a 3.5" enclosure (Icy Dock) in one of the internal drive bays in my Mac Pro. The enclosure was defective, apparently, because the SATA ports on the enclosure didn't quite line up with the internal SATA ports in the MP drive bay. Unfortunately, I pushed a little too hard to get it in and I ended up bending the metal brackets that the black plastic SATA port is screwed on to in the Mac Pro.
The result is that the SATA port is now bend down at about a 10% angle, which is enough to prevent me from sliding a hard drive in and connecting it. I've tried to bend it back to the normal angle, but I wasn't successful.
Trying to pick internal HD's for a new Mac Pro. Do the SATA 600's give me anything over the SATA 300's. Probably going to set-up an internal software RAID of two or three, till I can afford a decent external RAID. Does the internal data transfer speed max out at some level that buying a SATA 600 drive would be a waste? Also, I have two existing 20" Apple LCD Monitors, probably 5 years old that i need to use. Is the appropriate adapter simply the MDP to DVI connector? They're currently connected to a G5.
View 8 Replies View RelatedI'm a graphic designer but I don't know much about my computer's inner workings. I have a mirrored drive door dual 1Ghz G4. I have two SATA drives that were used in a Dell server on a RAID setup. They are Western Digital Caviar HDs, 250 GB apiece.
My question is: is there any way to install one of these drives in my computer?
which is better to get new MAC Pro with SAS hard drives or with SATA.
View 3 Replies View RelatedDoes anyone know if the internal SATA drives on the MacPros are hot swappable?
View 2 Replies View RelatedAfter installing internaly i booted back-up from my external FireWire HD bootable back-up, deleted and mounted the new HD and via 'carbon copy' i copied my bootable back-up onto it, set it as my start up disc and on restart everything appered to be fine but when i cope any files like movies onto new HD it fails telling me some info cant be read or writen but they copy no problem onto my external HD?
View 5 Replies View RelatedThe time has come to move to a RAID setup in my Mac Pro. Ideally I'd like to run 4 1.5TB SATA drives in a RAID 5 or 10. It seems there are a LOT of threads on this topic all filled with different information, so I have a few questions...
Which RAID cards are bootable?
Do any work like the Apple card and interface with the drives through the logic board?
If not, how do you connect the internal drives to the RAID card in their stock bay locations?
I have a g4 quicksilver and I bought a 1TB sata hard drive to put in it. I also bought a pci card to connect the sata harddrive. I disconnected my other hard drive and put in the OS X disc to load the operating system, but when I get to the screen to choose which disc to install it on, my hard drive doesn't appear.
View 4 Replies View RelatedI have installed 2 extra hdd's in my 2008 mac pro using the 2 extra sata ports. I was wondering if it would be possible to install a sata controller in the mac pro to increase my sata ports so I can add 2 more sata drives instead of the remaining optical drive. And if I can where would it go.
View 6 Replies View RelatedIs anyone having trouble with the above drive since the update?
I'm using it (Barracuda 7200.11 - 1TB) to house my home directory on my MacPro 2008, in one of the Internal Bays. Since the update I'm having trouble with folders and files going missing, countless freezes, preferences going missing, Time Machine dying.... it's practically crippled my Mac. A couple of times on restart it's failed to see the HD with the home directory on it, so, power down... restart... and everything has magically returned to normal.
The occasions it has worked I've checked out it's status using TechTool Pro 5 and it says everything is fine. 2 mins later - freeze.... restart.... I've tried the combo install. No joy.
The drives are only a couple of months old.... someone tell me it's not just me!
I'm having a hard time trying to pin down what type of SATA connector the MBA rev C is using for its storage.
I found this DVnation page that lists 3 possible rev. C MBA ssd upgrades, but it is only mentioned that the connector type is Micro-SATA. Does this mean that the Intel X18 is as of rev C also suitable for the MBA (or any other regular 1.8" SATA ssd or hdd for that matter)?
I have a small server type item and it takes ide drives, i want to get some terrabyte drives and install them with sata to ide adapters.
There is not a lot of room in the top as the container around it slides on it and the ide ports are on the top of the item where the lid slides on,
i need to get some sata to ide adapters that either have flexibility or are long cable type adapters?
I'm replacing my 320GB HD from my late '08 MBP with a new Hitachi 500GB unit.
It would be a shame to let the old HD go to waste, so I was wondering what SATA enclosures you guys and girls are using? Preferably something that will connect to my MBP using either Firewire 800 or USB 2.0. There are so many out there, I don't want to buy the wrong one and be disappointed with the quality. Thanks in advance.
I have a power mac g5. I have been having problems with applications running REALY, REALLY slow. Shutting down and rebooting took upwards of 10 minutes each. I've reinstalled the OS (twice) and it still takes 8 minutes to boot up and applications still run slow. Not as slow as before, but slow none the less. I'm thinking it might be a "going bad" HD and I want to get another one. Do I have to buy a Mac HD or can I buy one from say [URL]? Ive noticed that HD's on the Mac site are about twice as much as buying from a online store like Newegg or tigerdirect. My existing HD is a Maxtor Serial-ATA (thats the same as SATA right?). As long as I get the same SATA drive, will my mac handle it?
Information:
Duel G5
Mac OS X (10.4.10)
first time to this site. I am looking into upgrading my pathetic 100 gig HDD that came in my MacBook pro and was wondering if any SATA 2.5 HDD will work? I am looking at a 500 gig 7200 RPM but the ones I find locally say they work PC only. Thanks in advance!
View 14 Replies View RelatedI know some SATA II drives can be jumpered to be SATA I compatible. Would they be reliable in this application? I have an iMac G5 and I'd like to upgrade the internal HD.
View 3 Replies View RelatedThis weekend I starting getting the clicking sound of death from my boot drive. Today I ran out and got a Western Digital Caviar Black 2TB HDD that is SATA/300 drive. Are the higher read/write speeds supported by the MP 3,1 controller?
As I write this, I've got CCC cloning the entire drive and praying that it doesn't fail mid-copy.
I have a PowerMac G4 (MDD 2003, I believe) that I use as my home media server for my Apple TV. Currently I have a 14+14GB boot RAID and 75+75GB storage RAID, using old PATA drives, of course. This is working great and is pretty well performing so far, but I'm going to run out of space eventually since I'm a packrat. I'm thinking that this Christmas will be a good time to renovate this machine, so here's the question MacRumors: What's the best SATA controller for my machine? PS: It's a dual 1.25GHz PowerMac 3,6. In MacTracker, this matches 3 different machines. Is there a way to find out which one this truly is?
View 3 Replies View RelatedDoes anyone know if the internal SATA drives on the MacPros are hot swappable?
View 3 Replies View Related