Mac Pro :: To Use Internal Sata Connectors To Connect An Optical Drive?
Dec 5, 2007
Has anyone used one of the internal sata connectors to connect an optical drive? Part of me thinks that's what they were put there for, under the optical bay. I'm after a Blue Ray Drive and loads of them are SATA.
Looking at blu-ray drives, I thought of an interesting question, and I just wanted to know if anyone knows the answer...why was an older standard used for the MacPro's optical bays, especially when the HDs use SATA? And I know the motherboard has sata ports, so that's not my issue. It's just kind of a pain having to use an adapter or run a cable to the motherboard if I want to use a sata blu-ray drive for example.
I have a Mac Pro 1,1 and I was wondering, can I use one of the sata ports behind the front fan for a sata optical drive since the one included is IDE? Also, if I use that sata port for an optical drive, can I eject it with the eject button in the OS.
I'm wondering if it would be possible to fit an extra 1.8" sata ssd in my macbookpro 15" without removing the optical drive. This way i can keep my 500GB storage and move the OS to a 128Gb ssd. I was hoping to stick a 1.8" ssd on to my standard hdd. since the 1.8" is only 5mm thick. This would require a new sata cable from the motherboard to my 2.5" and to my 1.8" I'm not sure this exists. Does anybody think this is possible? or not?
I have a G4 Mac I wanted to buy a much larger drive. I bought a 1TB SATA internal drive, but when I tried to install it I found out it could not be installed on my G4. The motherboard does not have slots for the cable that came with the SATA drive. The hard drive that came with the computer is Ultra ATA from Seagate 180 GB. I found out that ATA and SATA have completely different configurations. I am planning to return it to the store. Is there anyway I can use the SATA on my G4, or should I just buy a larger Ultra ATA?
Im considering purchasing a higher capacity internal hardrive around the 750Gb/1Tb mark. However my macbook is the early 2008 model, and it seems the majority of hardrives are SATA II, having speeds of 3Gbt, which my mother board may not be capable of (apparently only 1.5Gbt) From researching and reading some reviews of others who have purchased internal drives on Amazon UK, some have had difficulty due to this problem, but have been able to fix the issue with a firmware update reducing SATA II drive speeds to 1.5Gbt.
Questions I have: Do all SATA / SATA II internal hardrives need a firmware update if replacing on to a new computer?(If so, would I need to look for a specific firmware update for the specific drive I intend on buying? And if you're in the knowledge would you mind posting links to these updates?)What is the process of updating the firmware i.e. would I need to put firmware on external usb hardrive 1st, then upload it to macbook after installing new internal drive (if it boots up my OS that is) etc. Would a 'hybrid' (disk+solid state) drive be compatible with a macbook as old as mine?Do I need to update my operating system to OS X Lion first, or can it be done after installing the drive?
my current laptop hardware:
Macbook Pro 15.4" (Early 2008 Model) Intel Core 2 Duo 2.4Ghz ProcessorGeForce 256Mb 8600M GT Graphical Processor Intel ICH8_M AHCI 1.5 Gbt MotherboardToshiba MK1655GSXF 160Gb 2.5" Hard DriveOperating System: OS X Leopard 10.5.8
Info: MacBook Pro, Mac OS X (10.5.8), 15.4" 2.4Ghz (Early 2008 Model)
I did a search but couldn't find any specific info as related to the 20" (late 2006) iMac. Basically, I do a lot of audio work with Logic and DP and I'm interested in replacing my 20" iMac's optical drive with a second internal hard drive. If anyone has any experience or insight regarding this, I would greatly appreciate your input. About 6 months ago, I did a DIY replacement of my iMac's internal hard drive (upgrade to 1 tb), so I'm pretty sure I'd like to DIY an optical drive / hard drive swap - that is, if it's 1) Proven to work stably (thermally and otherwise) 2) Not going to require the iMac's fan to be running faster/louder than normal Looking at my iMac's system profiler, the DVD drive is on an ATA bus (which, as I remember it, is slower than S-ATA). What kind of transfer rates do you think one could realistically expect with a hard drive on this ATA bus? Also, would I have to be careful about new hard drive compatibility, or are S-ATA and S-ATA II backwards compatible with ATA?
I'm planning to install a second internal HD in the optical drive space to accompany my 80gb SSD. The basic process of physically installing the 2nd HD I understand. [URL] But what I do not "FULLY" understand, is the process of "installing" the new HD when you boot the computer. - general and specifics This may seem like a "unnecessary/dumb" question, but the main reason why I'm asking this is because I'm installing this 2nd HD from the optical drive space. Is the process in installing an HD the same as if I were to install it in the original HD area?
The internal optical drive (MATSHITA DVD-R UJ-846) for my Intel iMac (late 2006) stop working after listening to a music CD. I inserted another music CD and the drive will try to read the CD, but after awhile, it would eject the CD. I inserted the last music CD I listened to and it did the same thing. Then I inserted several other data cds into the drive resulting in the same problem.
Info: iMac, Mac OS X (10.6.7), 2.16 GHz Intel Core 2 Duo
I have been reading and reading but I can't seem to find the answer. Im trying to figure out if the optical drive for the iMac has a slimline sata connector or a standart sata connector. Reason is I'd like to install an SSD and use an optibay adaptor.
Since the MBA has no internal DVD drive, I would like to pre load some DVD's on the MBA hard drive before I go on the road. I was thinking of using mac the ripper to rip my personal DVD. Is there a way in Front Row to import video_ts files without using an optical disk? As far as memory serves this wasn't possible with Tiger.If this is impossible what is an other way to store DVD's on my hard drive and watch them in front row?
I need to router 4 SATA cables from each of the HDD bays into the optical bay where there will be 3 SSDs and a regular HDD. What is the recommended way to do this?
I am adding a SSD to my Mac Pro. However the SSD is 2.5" and does not properly mount to the internal hard drive sleds so that when inserted into the Mac Pro that it will align with the on-board SATA connection. Can I use the following product to make that happen?
[URL]
I already am aware of ICY Dock and I do not want to use ICY Dock. I also have to DVD drive so that is out of the question.
I'm looking for a PCIe SATA controller for my Mac Pro 1,1 with both internal* and external (to connect two external drives) ports. internal SATA port needed to connect an LG BluRay drive (GGW-H20L) actually connected to the ODD SATA port (but I want to use it on Windows too and I would like to upgrade firmware without opening my Mac or using the AHCI mode).
Does anyone know if esata is as fast as the Internal version? If so I would be very interested in replacing my optical drive with a ssd and adding a esata for an external optical drive or another ssd. Would this work?
I picked up one of the DX4 adapters from Maxupgrades - and it holds my 4 SSDs beautifully. Now I am looking for a host adapter that I can connect all 4 to create a Strip and boot off of. I am currently using a Sonnet E4i but it doesnt support booting. My Christmas wish: an internal SATA host adapter that allows booting and works with snow leopard.
I've recently bought a WD Scorpio Blue WD5000BEVT 500GB 2.5" SATA hard drive to put in my PS3. I decided instead to put this in my MacBook Pro and put the 320GB drive from my MBP in the PS3 - which I have done and works perfectly.
Now the problem is the WD HDD in the MBP. I can physically hear the HDD spin down and then almost immediately spin up again. Whilst in this state of "spin down" OSX is a little unresponsive. Does anyone know how to stop the drive from shutting down so often. It literally happens every few seconds. I haven't noticed the problem when booted in Windows 7 though I could be wrong.
I have plugged a toslink cable between my 5.1 amplifier and my iMac, but I would like to be able to find a software that would let me switch between digital out and the internal iMac speakers (which are quite good actually!)
I know it is a Mac OS driver limitation since Windows 7 (via Bootcamp) let me choose the output. In Mac OS once I plugg something, "Internal speakers" output option disappear from sound preferences, audio midi setup, HalLAB, .... This causes unnecessary wear and tear on the audio port from constantly inserting and removing the cable to switch from built in speakers to external audio system.
Recently I tried installing a 2.5" SSD in a 3.5" enclosure (Icy Dock) in one of the internal drive bays in my Mac Pro. The enclosure was defective, apparently, because the SATA ports on the enclosure didn't quite line up with the internal SATA ports in the MP drive bay. Unfortunately, I pushed a little too hard to get it in and I ended up bending the metal brackets that the black plastic SATA port is screwed on to in the Mac Pro.
The result is that the SATA port is now bend down at about a 10% angle, which is enough to prevent me from sliding a hard drive in and connecting it. I've tried to bend it back to the normal angle, but I wasn't successful.
I want to know if there is a way to connect sata 2.5 hd's to the sata connections in the mac pro. I cannot seem to find the cables to be able to do this. Can someone help with a link? I have several 250gb sata drives that have been taken out of mbp's and would like to put them to work.
I have looked and found several ways to access the ports, but have been stuck at finding the cable.
I have a 13" MacBook Pro 2011, 2.3gHz, 320GB. What connector does it have? And would SATA still work with my laptop? One more question, what are the exact dimensions of the hard disk drive bay in my laptop, the manual only says 2.5".
I want to keep my applications etc on one internal HD and use my second internal HD as a back up.I am a graphic designer, and i have been backing up to an external LACIE Porche 160 Gig firewire HD. This has worked fine, but...My second internal HD (112 gig?) is still loaded with 10.3 and has adobe CS2 on it along with some other crap that I no longer need.I have loaded Adobe CS3 on my primary drive and have all the files I need on that one...What is the best way to set up my second HD as a "slave" drive to improve the performance of my G5 dual 2 Ghz??Will there be any issues now that I loaded Leopard on the primary HD?
Information: Power PC G5 Tower 2 Ghz dual processor (2004?) with two internal hard drives Mac OS X (10.5)