Mac Pro :: MacPro Raid And Bootcamp?
Feb 29, 2008
I'm putting together a workstation that primarily is going to be used for Windows development and I wanted to have as fast a disk subsystem as possible.
It doesn't seem to be BootCamp drivers available for the card that Apple sells, so I found this card instead:
[URL]
It has EFI firmware and is able to boot MacOSX from raid arrays. The only question is if it is able to boot stuff through Bios emulation.
Vista x64 is the primary target here, and SP1 actually has EFI booting support, so it might be possible to use this. However when I tried to install Vista x64 with SP1 integrated on the MacBook Air I wasn't even able to boot installer DVD because of EFI incompatibilities.
Anyone have any experiences with booting BootCamp on a MacPro with a raid card?
View 3 Replies
ADVERTISEMENT
Feb 10, 2009
ok Im pondering buying a mac pro once they release the updates and I am wondering if I can take a 3.5" SATA drive out of my current desktop running XP and transplant it into the mac pro then use it with either VMware or bootcamp. So will this work or will I have to partition my hard drive and buy another copy of XP?
View 18 Replies
View Related
Sep 2, 2009
Would like to run WinXP pro on an SSD drive on a 8 core 3Ghz Mac pro.
Tried initially placing this drive on one of the two xtra SATA ports and mounting it where the extra CD drive goes, then discovered that Windows won't recognize and would need drivers/hacking etc.
Have decided to put it in regular bay 4 and use bootcamp. Do I need to install any special drivers to maximize the ability of Windows to access this drive?
Model Name:Mac Pro
Model Identifier:MacPro2,1
Processor Name:Quad-Core Intel Xeon
Processor Speed:3 GHz
Number Of Processors:2
Total Number Of Cores:8
L2 Cache (per processor):8 MB
Memory:8 GB
Bus Speed:1.33 GHz
Boot ROM Version:MP21.007F.B06
SMC Version (system):1.15f3
View 9 Replies
View Related
Sep 2, 2009
I did a clean install of snow leopard and i wanted to install Windows 7 via boot camp but when I go to bootcamp utility i get a message
"You must update your computer's Boot ROM firmware before using this setup assistant."
Not sure what I need to update? I have a 2009 Mac Pro running SL.
View 1 Replies
View Related
Jul 28, 2009
Please can you share your specific Mac Pro settings for fusion, I'm running vista ultimate x64, and it is slow as a geriatric tortoise!!!!
I did install via bootcamp, as I was unsure on how to do the "sliding" of ACHI and where I would get all the drivers from, an idiots guide would be appreciated
Thanks guys, I have searched around a bit but got nothing specific
my specs quad 2.66 8gb ram, 640 stock for windows, in Bay 1 for now, but moving to optical after SSDs arrive
View 24 Replies
View Related
Jul 8, 2010
I have a 2008 MacPro with dual 2.8's running the latest version of 10.5 (I have been reluctent to upgrade to 10.6). I also use Apples's magic mouse.
The only reason I still use my PC is for Quicken. I have tried trials of Mac replacements but they just didn't cut it for me and Essentials has had disappointing reviews. So I have a full copy of XP Pro, SP2 coming.
I was going to do a small partition of 20 or 30 gigs and install XP and Quicken using Boot Camp.
Any advice/comments form those with Mac/Windows experience?
My Mac is hard wired to my Airport so wireless internet is not an issue and I may not even activate internet for the windows partition. No need for Mac to PC file sharing either.
Will the Blue Tooth mouse work?
I have read SP3 can cause problems so stay with sp2?
Might it be better to have a HD just for windows?
View 2 Replies
View Related
Nov 7, 2010
Macpro 8 Core 2.4Ghz with 12Gig RAM and top ATI card. Running Windows 7 through Bootcamp (much better than Parallels 6!). Ran the Performance Benchmark and returned a score of 7.6, except for HD which was 5.3. Apparently the top score for current hardware is 7.9, so I am wondering if others have run the test, and whether this is hardware or driver related etc, and what other people are getting.....
View 7 Replies
View Related
Aug 7, 2010
Is it possible to run the a MacPro under bootcamp all the time using a high end Nvidia or ATI graphics card?
I would like to use the MacPro as a gaming PC.
View 7 Replies
View Related
May 26, 2010
I'm looking for a new video card for a MacPro 1.1 (Intel 2007) that will handle Steam source engine games decently and also work with bootcamp. I'm OK with BIOS flashing a PC card but I don't want to have to deal with patching files as well to get it to work since its going into a friends Mac and I won't always be around to show him how to patch stuff if he ever reinstalls OS X.
View 12 Replies
View Related
Dec 17, 2010
LSI 9240-8i SAS RAID for BootCamp only. Will it be bootable for BootCamp? Anyone using that card? I need to connect 4 SSD drives to work with my Mac Pro for Windows 7 Ultimate 64-bit.
View 3 Replies
View Related
Aug 21, 2009
I'm planning to setup a RAID on My Mac Pro (2006 2.66 Quad Core). I know Bootcamp not support Hardware Raid Card. Can I use the Hardware Raid Card for boot Mac OS X and storage Data, and use the onboard controller boot the Bootcamp Drive?
View 6 Replies
View Related
Sep 28, 2006
1) Can I take my secondary drive in my Powermac G5 and install it into my forthcoming Mac Pro ? Or is the SATA interface different on the new machines.
2) Ordering extra memory from Crucial to save $, what's the situation with 'fans' and things on the memory. I'm confused, totally. Does the mac pro's require additional heat cooling on the memory, does the memory from crucial come with this, is it easy to install like the powermac or am I going to be left floundering like a fish out of water....
View 5 Replies
View Related
Mar 29, 2009
According to everything I've read, this shouldn't have worked, but it seems that Win7's ability to boot from GPT volumes makes it possible. I just replace the optical drive in my 2.66 MBP with a 2nd Seagate 500g drive and wanted to see what the OSX soft raid could do.
Long story short:
1. Each of the pair of disks contained a member of the larger OSX raid volume, plus a smaller partition intended for Windows.
2. The win-intended partitions stayed independent and formatted as FAT32.
3. Booted off of Win7 media. In setup, selected 1 of the FAT32 partitions and reformatted it NTFS. Installer accepted the partition as valid and installation proceeded normally and completed with Win7 as a valid boot option. OSX still works, of course.
Windows installer wouldn't accept the drives as a raid volume and although Vista is supposed to support GPT for data volumes, it wouldn't accept it as a system vol. Don't bother with Bootcamp Setup Assistant. It simply says there's no valid disk and is of no help at all. This has to be done manually.
View 15 Replies
View Related
Jan 31, 2008
I hear that the Apple RAID card is not Boot camp bootable/compatible.
And I know that the Areca hardware RAID cards are OS-X bootable (Leopard).
I like to know if you can boot Boot camp/Windowszz with those card's.
View 21 Replies
View Related
Dec 4, 2009
I am thinking of using two 80 gig Intel SSD's in my mac pro. I am a bootcamp user...
Should i put win 7 on one ssd and osxsl on another?
Or should I hardware Raid-0 them and partition the raid-0 in half for each os?
View 2 Replies
View Related
May 16, 2007
I have a PowerMac G5 and need to purchase an internal RAID card to create a RAID 1 mirror of the system drive... one that will allow me create a Hardware RAID 1 mirror, not software RAID through OS X.
View 2 Replies
View Related
Dec 2, 2009
I just bought a Guardian Maximus RAID1 kit and I have two 1TB drives in it. I'm using it over Airport Extreme as an airdisk (mac osx 10.6.2)
My question is simply: am I running a risk by partitioning it into two partitions? Should I ever have to rebuild the failed disk (which I understand is really simple with the Guardian Maximus) - will it have trouble doing two partitions? I'm using one 500gb partition for time machine and one 500gb partition as redundant itunes/media.
View 3 Replies
View Related
Jan 28, 2009
I have a Lacie ext hard drive with 2 x 250gb HD that were one RAIDed into a single 500gb HD. I ran this update Lacie firmware update: http://www.lacie.com/support/drivers...r.htm?id=10053 And now my HD will only show up as two separate HDs of 250gb instead of a single RAID HD of 500gb.
View 6 Replies
View Related
May 1, 2008
I have a macpro with 4 x 1tb drives
Is it possible to get a highpoint raid controller and put those 4 drives in a raid 5 array (and then create partitions inside that array) - or do you need to have 1 drive by itself for the operating system, and then create a raid array using the remaining 3 drives?
Lastly, are the highpoint 3500 series a decent card? and fully compatible?
View 3 Replies
View Related
May 20, 2009
I have a new Mac Pro Quad 2.93 with the Mac RAID card installed with four 1TB drives setup in a RAID 5 array. When creating the volumes in the RAID utility, you can not edit them, resize, etc. If one large volume is created in the RAID utility, you can then partition that one volume using the Apple Disk Utility, which then allows you to resize if needed.
View 1 Replies
View Related
Sep 13, 2009
I'm using the software RAID right now. Everything is set as RAID 10. I want to move to a RAID card� if I keep it as RAID 10 will I still need to redo everything?
View 1 Replies
View Related
Jan 28, 2008
ive put 4 of the hitachi 1tbs in my new mac pro.. and i really want to do Raid on them eventually.. and buy the pricey apple raid card.. i'll do it.. but speed wise:
How fast is a Sata connection straight from HD>Motherboard... ~75mb/s?
Is the Raid 5 config with all those drives much faster... around ~110mb/s?
Do you know if there is anyway to get a 5th drive into the raid 5 array? using the ODD space.. or some externals too... i need as much as space as possible...
And boot camp wont work with raid card anymore? I was thinking to have the startup disc be a raptor to increase speed on the apps, how would it integrate with the raid card, etc
View 9 Replies
View Related
Nov 16, 2009
I have a RAID 0 set up with two 1.5TB HDs. I am doing some reorganizing and want to take all the data on the RAID 0 and move it to one of the hard drives in the RAID 0 and create to single drives. Is there any way of moving all the data from a RAID 0 onto one of the HDs?
View 4 Replies
View Related
Apr 20, 2010
I am planning on getting a 2010 MP when they come and have a question about it. I am 90% sure that with my budget, I will not be able to after a RAID card. I am wondering if software RAID would be alright or if it's so bad it's not worth doing. Also, there is small chance that I could buy a RAID card later on, how would I install it? I will be using it for 3D animation with Maya and some zbrush modeling. Also I will be doing some Photoshop and illustrator and maybe some gaming on win 7 boot camp. Feel free to list any other pros and cons about either a software RAID or hardware RAID, I wana make sure I have all the details before making a final decision on it.
View 24 Replies
View Related
May 15, 2009
I have never setup RAID before and this question may be totally stupid for that matter.
Can I setup RAID 1 (or call it mirroring) without the RAID card? I have two 1TB internal drives in my Mac Pro and I want to mirror them. I don't want to spend another 700 bucks just to setup a mirror.
Disk Utility shows some RAID options, but I am not sure how to use them, or if they will work at all without the RAID card.
View 9 Replies
View Related
Feb 14, 2010
On my 2009 Mac Pro, OS X's disk utility seems to allow the provision of making a mirror RAID or a stripe RAID.
Is it possible to shove in 2 drives, make a RAID 0 for two of them, and then add in 2 more drives to make a RAID 1 out of that RAID 0? (a RAID 0+1?)
View 10 Replies
View Related
Jul 4, 2008
In the PC world, most latest motherboards support either SLI or CrossFire. How about the MacPro's motherboard?
View 15 Replies
View Related
Jul 17, 2010
The 8800GT in my Mac Pro 1,1 just died. I'm back up with the 7300 for now.
Can I adapt the EVGA's GeForce GTX 285 Mac Edition for use? It comes with the cables, and I more than willing to pay the extra $$$ to save myself hunting around for parts.
I'm also a bit confused about the 4870 upgrade. Does the Apple version work out of the box on my 1,1? If so, maybe that's the way to go for now?
View 2 Replies
View Related
Mar 29, 2012
I'm trying to reboot Snow Leopard on a Mac Pro and reformat the HD. But of course, nothing can ever be easy and the darn thing will not boot from CD..It just boots from the HD and takes me to the login screen everytime,has anyone else had this problem?
Info:
Mac Pro, Mac OS X (10.7.3), Snow Leopard Mac OS X 10.6
View 4 Replies
View Related
Jun 17, 2012
Can I adjust a Macpro to a MacBook pro?
Info:MacBookPro, Mac OS X (10.7.4), 13" core i7
View 3 Replies
View Related
