Windows On Mac :: BootCamp On UMBP With RAID 0
Mar 29, 2009
According to everything I've read, this shouldn't have worked, but it seems that Win7's ability to boot from GPT volumes makes it possible. I just replace the optical drive in my 2.66 MBP with a 2nd Seagate 500g drive and wanted to see what the OSX soft raid could do.
Long story short:
1. Each of the pair of disks contained a member of the larger OSX raid volume, plus a smaller partition intended for Windows.
2. The win-intended partitions stayed independent and formatted as FAT32.
3. Booted off of Win7 media. In setup, selected 1 of the FAT32 partitions and reformatted it NTFS. Installer accepted the partition as valid and installation proceeded normally and completed with Win7 as a valid boot option. OSX still works, of course.
Windows installer wouldn't accept the drives as a raid volume and although Vista is supposed to support GPT for data volumes, it wouldn't accept it as a system vol. Don't bother with Bootcamp Setup Assistant. It simply says there's no valid disk and is of no help at all. This has to be done manually.
View 15 Replies
ADVERTISEMENT
Aug 1, 2009
I have a late 2008 uMB and my friend has a late 2008 uMBP. Is it possible to use my restore disk to install the bootcamp drivers on his computer after he installs windows? Are the drivers all the same, or are they hardware specific like they are with the OSX install? Any help is appreciated,
View 1 Replies
View Related
Dec 1, 2009
I just installed a copy of window 7 x64 ultimate on my uMBP 15", 2.66, 4GB ram, 9600 GT.
everything went well using the bootcamp that comes with my snow leopard dvd and also using the bootcamp driver on that dvd too.
anyway i have a few question regarding this.
-after i installed the windows, now everytime i perform disk utillity, verify disk permissions, it takes considerable longer time compared to when the machine is Mac OS only.
previously , after i hit the "verify disk permissions button" it will says straight away like estimated time 28 minutes, then drop to 8 minutes and then to 1 and finaally done.
now after i install window 7 on my mac using boot camp. when i hit the "verify disk permissions" it it says estimated time 1hour 40 minutes !!!
of course it will finissh eventually in less than that , but still it considerably took longer compared to prior window 7 installattion, does anyone experience this as well ?
-the performance benchmark on win 7 ultimate x64 on my mbp is 5.6 score.
is this normal ?
View 1 Replies
View Related
Dec 17, 2010
LSI 9240-8i SAS RAID for BootCamp only. Will it be bootable for BootCamp? Anyone using that card? I need to connect 4 SSD drives to work with my Mac Pro for Windows 7 Ultimate 64-bit.
View 3 Replies
View Related
May 5, 2009
i have been running Windows 7 beta on my uMBP since it was released.
I downloaded the 32bit one because i was afraid the drivers will not work.
I have a 2.53Ghz, 4gig ddr3 ram MBP.
Should i download 32bit or 64bit RC?
View 1 Replies
View Related
Feb 29, 2008
I'm putting together a workstation that primarily is going to be used for Windows development and I wanted to have as fast a disk subsystem as possible.
It doesn't seem to be BootCamp drivers available for the card that Apple sells, so I found this card instead:
[URL]
It has EFI firmware and is able to boot MacOSX from raid arrays. The only question is if it is able to boot stuff through Bios emulation.
Vista x64 is the primary target here, and SP1 actually has EFI booting support, so it might be possible to use this. However when I tried to install Vista x64 with SP1 integrated on the MacBook Air I wasn't even able to boot installer DVD because of EFI incompatibilities.
Anyone have any experiences with booting BootCamp on a MacPro with a raid card?
View 3 Replies
View Related
Aug 21, 2009
I'm planning to setup a RAID on My Mac Pro (2006 2.66 Quad Core). I know Bootcamp not support Hardware Raid Card. Can I use the Hardware Raid Card for boot Mac OS X and storage Data, and use the onboard controller boot the Bootcamp Drive?
View 6 Replies
View Related
Jan 31, 2008
I hear that the Apple RAID card is not Boot camp bootable/compatible.
And I know that the Areca hardware RAID cards are OS-X bootable (Leopard).
I like to know if you can boot Boot camp/Windowszz with those card's.
View 21 Replies
View Related
Dec 4, 2009
I am thinking of using two 80 gig Intel SSD's in my mac pro. I am a bootcamp user...
Should i put win 7 on one ssd and osxsl on another?
Or should I hardware Raid-0 them and partition the raid-0 in half for each os?
View 2 Replies
View Related
Jan 30, 2009
Used migration assistant to move my Blackbook apps and settings to the Air using a Time Machine backup from my Time Capsule - wirelessly. Two hours later (not terrible) and I'm using my Air with all my apps and setting - fantastic.
Question: My Blackbook also has a Bootcamp partition running Windows - is there a way to take that image and migrate it to my MB Air? I'd rather not have to purchase the Superdrive and re-install/setup the Windows OS on my Air....
View 8 Replies
View Related
Jan 23, 2009
I want to try out Windows 7. During this process though I deleted my winXP partition. When I went to create a new BootCamp partition in The BootCamp SetUp Assisstant, it failed to create the partition on my harddrive.
I was greeted with the error, "BootCamp SetUp assistant failed to yada yada yada, please backup and reformat your harddrive."
So my question is do I really have to reinstall Mac OS X? (I backup with TimeMachine so it won't be a big deal but still thats a very long process.) Do you guys have any tips or anything to get Mac OS X to partition my main HDD?
View 3 Replies
View Related
Mar 3, 2009
I see that Apple has announced a new Mac Pro RAID card, the price has dropped to $700. It still only supports OS X, no windows driver. The bandwidth limitation of 320MB/sec seems to have increased to over 500MB/sec. Anyone know if this compatible with older Mac Pros? Is the previous card discontinued? Apple is not even offering the SAS drives when configuring a Mac Pro to buy as shown in the benchmark configuration performance example.
View 12 Replies
View Related
Aug 23, 2009
Can I install windows XP, on a Software RAID?
Also can you partition a hardware raid?
View 3 Replies
View Related
Aug 28, 2009
Maybe I'm just over thinking this, but Apple never posted a KB article about how to upgrade an existing bootcamp partition with the new snow leopard bootcamp 3.0 drivers. I'm assuming if you already have bootcamp 2.1 you boot up in boot camp and then insert the snow leopard disc in order to upgrade the drivers to 3.0 correct? Or do I have to erase my stupid bootcamp partition and reinstall it all over again using the new leopard boot camp assistant in order to get to 3.0?
View 11 Replies
View Related
May 31, 2009
Can I install a Raid Controller and connect say two drives to it, specially for windows? Will it be bootable? Or perhaps even connect the iPass of the four internal bays to an Adaptec 5405 and get a separate cable for my Mac Drive. Will both be bootable? What if I just want to boot Windows for now? I sometimes need to convert my early 2008 Mac Pro into a rather beefy Windows workstation and the lack of HW Raid is rather irritating.
View 1 Replies
View Related
May 16, 2007
I have a PowerMac G5 and need to purchase an internal RAID card to create a RAID 1 mirror of the system drive... one that will allow me create a Hardware RAID 1 mirror, not software RAID through OS X.
View 2 Replies
View Related
Dec 2, 2009
I just bought a Guardian Maximus RAID1 kit and I have two 1TB drives in it. I'm using it over Airport Extreme as an airdisk (mac osx 10.6.2)
My question is simply: am I running a risk by partitioning it into two partitions? Should I ever have to rebuild the failed disk (which I understand is really simple with the Guardian Maximus) - will it have trouble doing two partitions? I'm using one 500gb partition for time machine and one 500gb partition as redundant itunes/media.
View 3 Replies
View Related
Dec 26, 2009
i have Snow Leopard running in a RAID, and just a separate single drive installed for windows 7. Problem is, when i try to go to bootcamp assistant, it tells me that RAIDS aren't supported in bootcamp. I don't want to install it on my raid, just on the other single drive. Does anyone know a workaround or how to do this?
View 24 Replies
View Related
Jan 28, 2009
I have a Lacie ext hard drive with 2 x 250gb HD that were one RAIDed into a single 500gb HD. I ran this update Lacie firmware update: http://www.lacie.com/support/drivers...r.htm?id=10053 And now my HD will only show up as two separate HDs of 250gb instead of a single RAID HD of 500gb.
View 6 Replies
View Related
May 1, 2008
I have a macpro with 4 x 1tb drives
Is it possible to get a highpoint raid controller and put those 4 drives in a raid 5 array (and then create partitions inside that array) - or do you need to have 1 drive by itself for the operating system, and then create a raid array using the remaining 3 drives?
Lastly, are the highpoint 3500 series a decent card? and fully compatible?
View 3 Replies
View Related
May 20, 2009
I have a new Mac Pro Quad 2.93 with the Mac RAID card installed with four 1TB drives setup in a RAID 5 array. When creating the volumes in the RAID utility, you can not edit them, resize, etc. If one large volume is created in the RAID utility, you can then partition that one volume using the Apple Disk Utility, which then allows you to resize if needed.
View 1 Replies
View Related
Sep 13, 2009
I'm using the software RAID right now. Everything is set as RAID 10. I want to move to a RAID card� if I keep it as RAID 10 will I still need to redo everything?
View 1 Replies
View Related
Nov 5, 2009
I've just bought a copy of windows 7. Just wondering if i install it via bootcamp now can i update bootcamp in a few weeks when apple releases windows 7 support or will i have to reinstall windows 7 when that happens ?
View 3 Replies
View Related
Jan 28, 2008
ive put 4 of the hitachi 1tbs in my new mac pro.. and i really want to do Raid on them eventually.. and buy the pricey apple raid card.. i'll do it.. but speed wise:
How fast is a Sata connection straight from HD>Motherboard... ~75mb/s?
Is the Raid 5 config with all those drives much faster... around ~110mb/s?
Do you know if there is anyway to get a 5th drive into the raid 5 array? using the ODD space.. or some externals too... i need as much as space as possible...
And boot camp wont work with raid card anymore? I was thinking to have the startup disc be a raptor to increase speed on the apps, how would it integrate with the raid card, etc
View 9 Replies
View Related
Nov 16, 2009
I have a RAID 0 set up with two 1.5TB HDs. I am doing some reorganizing and want to take all the data on the RAID 0 and move it to one of the hard drives in the RAID 0 and create to single drives. Is there any way of moving all the data from a RAID 0 onto one of the HDs?
View 4 Replies
View Related
Apr 20, 2010
I am planning on getting a 2010 MP when they come and have a question about it. I am 90% sure that with my budget, I will not be able to after a RAID card. I am wondering if software RAID would be alright or if it's so bad it's not worth doing. Also, there is small chance that I could buy a RAID card later on, how would I install it? I will be using it for 3D animation with Maya and some zbrush modeling. Also I will be doing some Photoshop and illustrator and maybe some gaming on win 7 boot camp. Feel free to list any other pros and cons about either a software RAID or hardware RAID, I wana make sure I have all the details before making a final decision on it.
View 24 Replies
View Related
Jan 22, 2010
A question about windows 7 and a Mac pro 3.1 edition 2008. I have installed windows 7 and all is fine and dandy everything works, except in the bottom right hand corner there the error flag showing on the tool bar.
This is the error.
Apple Memory Controller GPE event is not compatible with windows 7.
View 1 Replies
View Related
Oct 12, 2010
i'm using macosx 10.6.4 and bootcamp assistant 3.1
now here is the problem my windows 7 is infected with virus (thats why windows suck big time) and i need to reformat my windows 7 and reinstall a new windows 7.
how am i supposed to do it? insert the installation disk and do like how we initially installed windows 7? just format the partition and reinstall again? i just want to make sure so i ask before doing anything.
or can i do this? i use winclone to restore? any1 have any idea? i'm new to all this i dont know how to do it. i have backup using winclone but how do i do it? do i still need to format then only use winclone?
View 6 Replies
View Related
Dec 3, 2010
I've tried re-installing and updating every possible graphics related driver for Windows 7 i cannot for love or toffee get the bloody thing to even recognize my display. I am using a 26" tv as an external display, it works on OS X (very easily), windows XP (also very easily) and even Vista (also easily) and connecting through a DVI/HDMI connector. Why not windows 7? I've scoured the web for answers but can't find anything. Is anyone at least in the same boat as me? I really need this solved soon
View 1 Replies
View Related
Sep 12, 2009
Is there any way to get the wireless mighty mouse to work in windows 7 running via bootcamp tried to pair it but no luck.
View 7 Replies
View Related
