Mac Pro :: SAS RAID For BootCamp Only
Dec 17, 2010LSI 9240-8i SAS RAID for BootCamp only. Will it be bootable for BootCamp? Anyone using that card? I need to connect 4 SSD drives to work with my Mac Pro for Windows 7 Ultimate 64-bit.
View 3 RepliesLSI 9240-8i SAS RAID for BootCamp only. Will it be bootable for BootCamp? Anyone using that card? I need to connect 4 SSD drives to work with my Mac Pro for Windows 7 Ultimate 64-bit.
View 3 RepliesI'm putting together a workstation that primarily is going to be used for Windows development and I wanted to have as fast a disk subsystem as possible.
It doesn't seem to be BootCamp drivers available for the card that Apple sells, so I found this card instead:
[URL]
It has EFI firmware and is able to boot MacOSX from raid arrays. The only question is if it is able to boot stuff through Bios emulation.
Vista x64 is the primary target here, and SP1 actually has EFI booting support, so it might be possible to use this. However when I tried to install Vista x64 with SP1 integrated on the MacBook Air I wasn't even able to boot installer DVD because of EFI incompatibilities.
Anyone have any experiences with booting BootCamp on a MacPro with a raid card?
I'm planning to setup a RAID on My Mac Pro (2006 2.66 Quad Core). I know Bootcamp not support Hardware Raid Card. Can I use the Hardware Raid Card for boot Mac OS X and storage Data, and use the onboard controller boot the Bootcamp Drive?
View 6 Replies View RelatedAccording to everything I've read, this shouldn't have worked, but it seems that Win7's ability to boot from GPT volumes makes it possible. I just replace the optical drive in my 2.66 MBP with a 2nd Seagate 500g drive and wanted to see what the OSX soft raid could do.
Long story short:
1. Each of the pair of disks contained a member of the larger OSX raid volume, plus a smaller partition intended for Windows.
2. The win-intended partitions stayed independent and formatted as FAT32.
3. Booted off of Win7 media. In setup, selected 1 of the FAT32 partitions and reformatted it NTFS. Installer accepted the partition as valid and installation proceeded normally and completed with Win7 as a valid boot option. OSX still works, of course.
Windows installer wouldn't accept the drives as a raid volume and although Vista is supposed to support GPT for data volumes, it wouldn't accept it as a system vol. Don't bother with Bootcamp Setup Assistant. It simply says there's no valid disk and is of no help at all. This has to be done manually.
I hear that the Apple RAID card is not Boot camp bootable/compatible.
And I know that the Areca hardware RAID cards are OS-X bootable (Leopard).
I like to know if you can boot Boot camp/Windowszz with those card's.
I am thinking of using two 80 gig Intel SSD's in my mac pro. I am a bootcamp user...
Should i put win 7 on one ssd and osxsl on another?
Or should I hardware Raid-0 them and partition the raid-0 in half for each os?
I have a PowerMac G5 and need to purchase an internal RAID card to create a RAID 1 mirror of the system drive... one that will allow me create a Hardware RAID 1 mirror, not software RAID through OS X.
View 2 Replies View RelatedI just bought a Guardian Maximus RAID1 kit and I have two 1TB drives in it. I'm using it over Airport Extreme as an airdisk (mac osx 10.6.2)
My question is simply: am I running a risk by partitioning it into two partitions? Should I ever have to rebuild the failed disk (which I understand is really simple with the Guardian Maximus) - will it have trouble doing two partitions? I'm using one 500gb partition for time machine and one 500gb partition as redundant itunes/media.
I have a Lacie ext hard drive with 2 x 250gb HD that were one RAIDed into a single 500gb HD. I ran this update Lacie firmware update: http://www.lacie.com/support/drivers...r.htm?id=10053 And now my HD will only show up as two separate HDs of 250gb instead of a single RAID HD of 500gb.
View 6 Replies View RelatedI have a macpro with 4 x 1tb drives
Is it possible to get a highpoint raid controller and put those 4 drives in a raid 5 array (and then create partitions inside that array) - or do you need to have 1 drive by itself for the operating system, and then create a raid array using the remaining 3 drives?
Lastly, are the highpoint 3500 series a decent card? and fully compatible?
I have a new Mac Pro Quad 2.93 with the Mac RAID card installed with four 1TB drives setup in a RAID 5 array. When creating the volumes in the RAID utility, you can not edit them, resize, etc. If one large volume is created in the RAID utility, you can then partition that one volume using the Apple Disk Utility, which then allows you to resize if needed.
View 1 Replies View RelatedI'm using the software RAID right now. Everything is set as RAID 10. I want to move to a RAID card� if I keep it as RAID 10 will I still need to redo everything?
View 1 Replies View Relatedive put 4 of the hitachi 1tbs in my new mac pro.. and i really want to do Raid on them eventually.. and buy the pricey apple raid card.. i'll do it.. but speed wise:
How fast is a Sata connection straight from HD>Motherboard... ~75mb/s?
Is the Raid 5 config with all those drives much faster... around ~110mb/s?
Do you know if there is anyway to get a 5th drive into the raid 5 array? using the ODD space.. or some externals too... i need as much as space as possible...
And boot camp wont work with raid card anymore? I was thinking to have the startup disc be a raptor to increase speed on the apps, how would it integrate with the raid card, etc
I have a RAID 0 set up with two 1.5TB HDs. I am doing some reorganizing and want to take all the data on the RAID 0 and move it to one of the hard drives in the RAID 0 and create to single drives. Is there any way of moving all the data from a RAID 0 onto one of the HDs?
View 4 Replies View RelatedI am planning on getting a 2010 MP when they come and have a question about it. I am 90% sure that with my budget, I will not be able to after a RAID card. I am wondering if software RAID would be alright or if it's so bad it's not worth doing. Also, there is small chance that I could buy a RAID card later on, how would I install it? I will be using it for 3D animation with Maya and some zbrush modeling. Also I will be doing some Photoshop and illustrator and maybe some gaming on win 7 boot camp. Feel free to list any other pros and cons about either a software RAID or hardware RAID, I wana make sure I have all the details before making a final decision on it.
View 24 Replies View RelatedI have never setup RAID before and this question may be totally stupid for that matter.
Can I setup RAID 1 (or call it mirroring) without the RAID card? I have two 1TB internal drives in my Mac Pro and I want to mirror them. I don't want to spend another 700 bucks just to setup a mirror.
Disk Utility shows some RAID options, but I am not sure how to use them, or if they will work at all without the RAID card.
On my 2009 Mac Pro, OS X's disk utility seems to allow the provision of making a mirror RAID or a stripe RAID.
Is it possible to shove in 2 drives, make a RAID 0 for two of them, and then add in 2 more drives to make a RAID 1 out of that RAID 0? (a RAID 0+1?)
Used migration assistant to move my Blackbook apps and settings to the Air using a Time Machine backup from my Time Capsule - wirelessly. Two hours later (not terrible) and I'm using my Air with all my apps and setting - fantastic.
Question: My Blackbook also has a Bootcamp partition running Windows - is there a way to take that image and migrate it to my MB Air? I'd rather not have to purchase the Superdrive and re-install/setup the Windows OS on my Air....
had a bootcamp partition which I eventually ended up removing again with the bootcamp assistant.Now I want to create the bootcamp partition again, and when I start up the assistant, there is a 5gb leftover partition of the old bootcamp it seems. I just can't resize it... I've tried anything as low as resizing it to 10gb to 100gb... both fails.I have more than 200gb free space.I have just run a full defrag with iDefrag I've tried to do fileoptimization with techtool pro v5
I tried using camptune (which only works if you already have a working bootcamp partition, which I dont.
im on a goal to resize my bootcamp partition... im running 10.6.4 with Win7 in Bootcamp... i made a mistake of only making a 80GB partition for windows 7.... now i want to make it bigger, i have read up on a number of methods but most are outdated and users report issues with windows 7 and SL so i'm a lil stuck... this is my idea
I have 120GB unused HDD space atm so could i.. back up my 80GB partition to a DMG with disk utility then delete the old partition making the whole 200GB unallocated space... then use the bootcamp utility to re occupy the space then use disk utilities restore option to restore the image of the 80GB to the new 200GB partition... would this work? if not has anyone got any other methods to use with 10.6.4 SL and Win7?
Bought an OEM version to use with bootcamp. Everything works fine up to the point where it is supposed to let me format the partition that bootcamp created. The XP installation just skips right from when I select the C:yatta-yatta/bootcamp partition and starts installing. So obviously the partition is not bootable... Does anyone know if this is because the OEM version of the OS or something else. I tried to reduce the size of the partition because I read a thread about FAT32 not playing well with disc sizes greater than 32Gb. Still didn't work...
View 2 Replies View RelatedI want to try out Windows 7. During this process though I deleted my winXP partition. When I went to create a new BootCamp partition in The BootCamp SetUp Assisstant, it failed to create the partition on my harddrive.
I was greeted with the error, "BootCamp SetUp assistant failed to yada yada yada, please backup and reformat your harddrive."
So my question is do I really have to reinstall Mac OS X? (I backup with TimeMachine so it won't be a big deal but still thats a very long process.) Do you guys have any tips or anything to get Mac OS X to partition my main HDD?
im kind of new to this and i was trying to get bootcamp to run and also the windows partition that runs on bootcamp through vmware fusion. ive installed and uninstalled like 12 times now in 2 days and its driving me nuts. no matter what i do i cant get it to work. maybe someone on here can give me some tips because im lost.
View 6 Replies View RelatedMaybe I'm just over thinking this, but Apple never posted a KB article about how to upgrade an existing bootcamp partition with the new snow leopard bootcamp 3.0 drivers. I'm assuming if you already have bootcamp 2.1 you boot up in boot camp and then insert the snow leopard disc in order to upgrade the drivers to 3.0 correct? Or do I have to erase my stupid bootcamp partition and reinstall it all over again using the new leopard boot camp assistant in order to get to 3.0?
View 11 Replies View RelatedI have a silly RAID question, and I can't seem to find an answer via the search.
I have 4 disks that I want to put in a striped raid. One of those disks (disk 1) has data that I'd like to keep.
If I put these 4 disks in the striped raid will I lose the data that is on disk 1?
Currently I have a stock 320G drive installed with a 750G F1 Spinpoint installed as a Time Machine. I have maxed the 320 out so I'm looking to get a bigger drive.
Question: looking at the F1 Spinpoints, should I do 1x750 with 32M cache? Or 2x400G in a software RAID0? The 400s have a 16 Meg cache, so 32M total.
What's better? Do you think I'll see a better performance boost by striping over 2 drives with 16M cache each, or sticking with 1 drive with a 32M cache? And with the 2x400, I'll gain about 50 Gigs of storage over the 750G drive.
2x400 is $156
1x750 is $125
Is this a decent boost for only an additional $25, or should I just save a drive bay and get 1 drive?
I've just bought a copy of windows 7. Just wondering if i install it via bootcamp now can i update bootcamp in a few weeks when apple releases windows 7 support or will i have to reinstall windows 7 when that happens ?
View 3 Replies View RelatedMy Mac is beginning to run low on free HDD space. I'd like to add a second internal HDD to boost space. However, I don't like having a completely separate HDD icons because I can never remember which files are on which disk, not to mention a lot of copying between the two.
I'm considering adding a second HDD and combining the two into a RAID setup. Do I have to reformat my existing disk, or can I just add the second HDD's storage onto my existing disk with Disk Utility?
If I can just pop in a second HDD and add its capacity to the existing one's, that'd be ideal. Having to clear off the existing disk before joining the two would be a chore, though.
I have a RAID 0 set up on my 2009 MP. I am using two 2TB Caviar Blacks and have my boot drive on a OCZ 120GB Vertex. I have 50GB of iTune music on that drive and want to move it to the RAID 0.
Is it as simple as using the preferences on iTunes and choosing the 'Data' volume (name of my RAID 0) and assigning iTunes to that drive? Is this the guide I need to follow?http://macperformanceguide.com/Setti...ing-iApps.html
Okay, so... To make a raid 60, you make a raid 6 first then stripe that. If you started with a 4 disk raid 6 array and increased your number of disks to 8 when you stripe it, I have no trouble visualizing performance and capacity advantages.
However, I'm having trouble visualizing trade offs, speed or capacity differnces if you compared a 8 drive raid 6 vs an 8 drive raid 60.
If you are not Nanofrog, but you did stay at a holiday inn last night, you are welcome to reply as well.