Please can you share your specific Mac Pro settings for fusion, I'm running vista ultimate x64, and it is slow as a geriatric tortoise!!!!
I did install via bootcamp, as I was unsure on how to do the "sliding" of ACHI and where I would get all the drivers from, an idiots guide would be appreciated
Thanks guys, I have searched around a bit but got nothing specific
my specs quad 2.66 8gb ram, 640 stock for windows, in Bay 1 for now, but moving to optical after SSDs arrive
im kind of new to this and i was trying to get bootcamp to run and also the windows partition that runs on bootcamp through vmware fusion. ive installed and uninstalled like 12 times now in 2 days and its driving me nuts. no matter what i do i cant get it to work. maybe someone on here can give me some tips because im lost.
I'm putting together a workstation that primarily is going to be used for Windows development and I wanted to have as fast a disk subsystem as possible.
It doesn't seem to be BootCamp drivers available for the card that Apple sells, so I found this card instead:
[URL] It has EFI firmware and is able to boot MacOSX from raid arrays. The only question is if it is able to boot stuff through Bios emulation.
Vista x64 is the primary target here, and SP1 actually has EFI booting support, so it might be possible to use this. However when I tried to install Vista x64 with SP1 integrated on the MacBook Air I wasn't even able to boot installer DVD because of EFI incompatibilities.
Anyone have any experiences with booting BootCamp on a MacPro with a raid card?
ok Im pondering buying a mac pro once they release the updates and I am wondering if I can take a 3.5" SATA drive out of my current desktop running XP and transplant it into the mac pro then use it with either VMware or bootcamp. So will this work or will I have to partition my hard drive and buy another copy of XP?
Would like to run WinXP pro on an SSD drive on a 8 core 3Ghz Mac pro.
Tried initially placing this drive on one of the two xtra SATA ports and mounting it where the extra CD drive goes, then discovered that Windows won't recognize and would need drivers/hacking etc.
Have decided to put it in regular bay 4 and use bootcamp. Do I need to install any special drivers to maximize the ability of Windows to access this drive?
Model Name:Mac Pro Model Identifier:MacPro2,1 Processor Name:Quad-Core Intel Xeon Processor Speed:3 GHz Number Of Processors:2 Total Number Of Cores:8 L2 Cache (per processor):8 MB Memory:8 GB Bus Speed:1.33 GHz Boot ROM Version:MP21.007F.B06 SMC Version (system):1.15f3
I have a 2008 MacPro with dual 2.8's running the latest version of 10.5 (I have been reluctent to upgrade to 10.6). I also use Apples's magic mouse.
The only reason I still use my PC is for Quicken. I have tried trials of Mac replacements but they just didn't cut it for me and Essentials has had disappointing reviews. So I have a full copy of XP Pro, SP2 coming.
I was going to do a small partition of 20 or 30 gigs and install XP and Quicken using Boot Camp.
Any advice/comments form those with Mac/Windows experience? My Mac is hard wired to my Airport so wireless internet is not an issue and I may not even activate internet for the windows partition. No need for Mac to PC file sharing either.
Will the Blue Tooth mouse work? I have read SP3 can cause problems so stay with sp2? Might it be better to have a HD just for windows?
Macpro 8 Core 2.4Ghz with 12Gig RAM and top ATI card. Running Windows 7 through Bootcamp (much better than Parallels 6!). Ran the Performance Benchmark and returned a score of 7.6, except for HD which was 5.3. Apparently the top score for current hardware is 7.9, so I am wondering if others have run the test, and whether this is hardware or driver related etc, and what other people are getting.....
I'm looking for a new video card for a MacPro 1.1 (Intel 2007) that will handle Steam source engine games decently and also work with bootcamp. I'm OK with BIOS flashing a PC card but I don't want to have to deal with patching files as well to get it to work since its going into a friends Mac and I won't always be around to show him how to patch stuff if he ever reinstalls OS X.
I read that for gaming, Bootcamp is the way to go, but for other general Windows use, Parallels or Fusion is the way to go.
But for me, I am planning to play games - hence Bootcamp - as well as use Parallels/Fusion for general use, namely to use Microsoft Office Onenote (an unbeatable note-taking software that needs a Mac version yesterday).
Is this even possible and how much memory will the additional parallels take (I'm planning a 40gb bootcamp partition btw on a 250gb hard drive)?
I have set up a Windows XP virtual machine on my MacPro but I want to also get it into Bootcamp so i can try playing some of my PC Games. Is there anyway I can keep the files/settings I have with my Virtual Machine, or do I basically have to start from scratch? and then, if i can do something here, how?
I have a few questions and I just grabbed a 13in 2.4 alu (Yep I�m a new switcher) First off, just wow on the Mac I love it to death coming from a PC, It�s great to have something that doesn�t feel like a plastic toy in my hands�! So my goal is to Boot Camp Windows 7 + Mac OS X, I have yet to upgrade the RAM on my unit so it�s still at 2GB (waiting for my work to start carrying it) and I�m also using Fusion 2.01. Now the Question x32 or x64? Which would run smoother under a Virtual Machine from within Mac. I know in Boot Camp 64 would be the obvious choice especially when I upgrade to 4GB but will Fusion pose more strain to the system emulating 64 or would it be no difference towards 32?
I have currently XP installed in Boot Camp and I have Vmware fusion installed in OSX. I can boot my XP partition via vmware fusion. Now the question is, when I boot the XP via vmware, I can boot from a Win 7 DVD and the installation starts. Can I just go on an install it in this way? The thing is that I'm not at home and only have a VNC session to my mac, so I can't install it in the classic way which requires a reboot
So i currently have a bootcamp partition with Windows Vista 64bit installed and i was wondering if I got VM Fusion would i be able to run my boot camp partition in Fusion and then what ever i save in fusion can be brought up in bootcamp.
I installed Windows 7 on Fusion and want to install it on Bootcamp, and now realized that I should have installed it on bootcamp first. Is it possible to use the current Windows fusion installation to run bootcamp from? or do I need to partion bootcamp and do a complete reinstall of windows? Pretty much wondering if I'm going to have to have 2 separate Windows 7 installations?
Has anyone managed to get Fusion and Bootcamp to play nice with windows 7 activation? I keep getting asked for my product ID whenever I switch between the two.
I'm thinking about buying a original Student Win7 license. It's really cheap and I think it's worth it since I (unfortunately) use Windows (Vmware Fusion) everyday to work (.NET developer). But I would like to play some games as well, but I know Fusion is not the best solution. Can I buy only one Win7 license and install in the same machine twice? One on a Bootcamp partition and another on a Fusion VM? Will I have problems activating both copies?
I installed Windows 7 through VMWare Fusion's easy setup. Can I use this existing Windows installation to make a BootCamp partition? I know Windows can be used vice versa (BootCamp first, then VMWare), but I already installed Windows 7 with VMware first.
I am having trouble booting up my windows 7 bootcamp, whenever i try to bootup it would give me some screen right after the windows logo and it'll say to repair or somthing, is this a common problem?
Which would be the best option? Bootcamp or VMware Fusion 3.0? and does bootcamp slow down the mac side of the OS ( such as boot up times etc ) What are the pros and cons to both?
With winter break approaching I was planning to get some PC games(COD:MW2, Battlefield etc) and play them during break but I'm not sure which software would be best to play those games. I've looked at VM Fusion, Parallels and Bootcamp but I'm still not sure as to the advantages and disadvantages of each. Is there a way i can use a playstation 2 controller to play pc games running through bootcamp? I've heard that I need some kind of an adapter but I've been unsuccessful in finding one so far.
I've been looking everywhere for an answer to this question and I'm really stumped. I've installed Bootcamp as I've realised Fusion is no good for gaming, however. I can't download all of my games again off steam due to a cap on my internet.
I've looked everywhere and is there anyway I can copy and paste the program files from my current virtual machine onto my new bootcamp machine?
I am an architect and I will be mostly using my new imac to work on Autocad 2010 along with a couple of other windows based applications. I understand the concept of the three methods of using windows but I do not know which would provide the best performance whilst working on Autocad, without it becoming a laborious task to load it up everyday.
I will be rocking dual monitors so I quite like the idea of Parallels or VMWare so that I can have Windows open on one monitor and Leopard on the other. But will this have a negative effect on the performance of Autocad? Also, which of these two is the better?
I can run Win7 perfectly in VMWare Fusion, but I can't Bootcamp into Win7 (my MBP will just reboot without ever getting to a Win load screen). I previously had Vista installed and could do both without any issues. I know that Apple hasn't yet released an update to Bootcamp, but I was under the impression that this had more to do with smaller items (sound, trackpad performance, temp management) than it did with outright catastrophic fail.
I use it to run Win XP on the bootcamp partition on my BlackBook at work.ow I'm getting frequent Firewall pop ups (in OSX) asking about vmnet natd inbound connections? I can either select okay or after several windows (pop ups) have appeared, they will disappear again seconds later of themselves.I select allow each time. I've removed and re added VMWare Fusion on the list of allowed apps in the OSX Security Advanced Firewall panel.
1) Can I take my secondary drive in my Powermac G5 and install it into my forthcoming Mac Pro ? Or is the SATA interface different on the new machines.
2) Ordering extra memory from Crucial to save $, what's the situation with 'fans' and things on the memory. I'm confused, totally. Does the mac pro's require additional heat cooling on the memory, does the memory from crucial come with this, is it easy to install like the powermac or am I going to be left floundering like a fish out of water....
Does anybody know if the WinXP - Boot Camp - Cirrus Audio issue has been resolved? My new MBP has WinXP Home Ed installed. Initial problem was that the volume was very low even with max setting. There was also a 'red light' coming out of the audio jack like a laser pointing device. After some searching in forums, i found a fix wherein i manually changed the Cirrus driver setting (turning off the optics and re-calibrating the volume limit). However, this seems to be a short-term solution only, because there is still a faint crackling sound emanating from my internal speakers whenever i'm running Windows in BC. I'm running SL 10.6.
I searched, but didn't find anything too specific on here. Can anyone recommend some good overclock values for my 9600m in bootcamp using nvidia tools? Basically, I'm looking for a stable profile or some recommended settings you've been using to overclock your 9600 in bootcamp. Maybe upload a screenshot like the one below with your custom adjusted settings for memory, core, and shader clocks. I'd rather not play around with it if someone has found a fast/safe setting that increases performance.
