I am thinking of using two 80 gig Intel SSD's in my mac pro. I am a bootcamp user...
Should i put win 7 on one ssd and osxsl on another?
Or should I hardware Raid-0 them and partition the raid-0 in half for each os?
I'm looking into upgrading the RAM of a late 2006 MacBook Pro from 2 gigs to maximum of 3 gigs. Should I just get a 2 gig chip and replace one of the 1 gig chips with that, or would I be better off purchasing a pair of 2 gig chips and replacing both of the old 1 gig chips with them? So basicly I'm asking wether the RAM chips should be in identical pairs or does it matter?
View 4 Replies View RelatedI bought this in sept. of 08. The 24'' 2.8 ghz interl core 2 duoMy mac came with 2gig 800 hmz DDR2 SDRAM. what are good places to upgrade to 4 gigs. I have $200 in amazon gift cards, so that seem to be the front running. Do I need a certain brand or will any brand work as long as its ddr2 sdram?
View 3 Replies View RelatedSorry if this has been asked recently, (searched but couldnt find it) but i am thinking about upgrading the RAM on my 1.5GHz PB G4 from 1.5 gigs to 2 gigs of RAM. What type of performance increase should i see? Is it worth the money?
View 3 Replies View RelatedLSI 9240-8i SAS RAID for BootCamp only. Will it be bootable for BootCamp? Anyone using that card? I need to connect 4 SSD drives to work with my Mac Pro for Windows 7 Ultimate 64-bit.
View 3 Replies View RelatedI'm putting together a workstation that primarily is going to be used for Windows development and I wanted to have as fast a disk subsystem as possible.
It doesn't seem to be BootCamp drivers available for the card that Apple sells, so I found this card instead:
[URL]
It has EFI firmware and is able to boot MacOSX from raid arrays. The only question is if it is able to boot stuff through Bios emulation.
Vista x64 is the primary target here, and SP1 actually has EFI booting support, so it might be possible to use this. However when I tried to install Vista x64 with SP1 integrated on the MacBook Air I wasn't even able to boot installer DVD because of EFI incompatibilities.
Anyone have any experiences with booting BootCamp on a MacPro with a raid card?
I'm planning to setup a RAID on My Mac Pro (2006 2.66 Quad Core). I know Bootcamp not support Hardware Raid Card. Can I use the Hardware Raid Card for boot Mac OS X and storage Data, and use the onboard controller boot the Bootcamp Drive?
View 6 Replies View RelatedAccording to everything I've read, this shouldn't have worked, but it seems that Win7's ability to boot from GPT volumes makes it possible. I just replace the optical drive in my 2.66 MBP with a 2nd Seagate 500g drive and wanted to see what the OSX soft raid could do.
Long story short:
1. Each of the pair of disks contained a member of the larger OSX raid volume, plus a smaller partition intended for Windows.
2. The win-intended partitions stayed independent and formatted as FAT32.
3. Booted off of Win7 media. In setup, selected 1 of the FAT32 partitions and reformatted it NTFS. Installer accepted the partition as valid and installation proceeded normally and completed with Win7 as a valid boot option. OSX still works, of course.
Windows installer wouldn't accept the drives as a raid volume and although Vista is supposed to support GPT for data volumes, it wouldn't accept it as a system vol. Don't bother with Bootcamp Setup Assistant. It simply says there's no valid disk and is of no help at all. This has to be done manually.
I hear that the Apple RAID card is not Boot camp bootable/compatible.
And I know that the Areca hardware RAID cards are OS-X bootable (Leopard).
I like to know if you can boot Boot camp/Windowszz with those card's.
I transferred about 400 gigs of data from my MacBook Pro to my new iMac using Migration Assistant, but can't find any of my data on Finder. I'm thinking that the data got transferred but not cataloged. Finder shows about 400 gigs of my hard drive being used, but the files it shows don't come anywhere close to 400 gigs. How can I find out what is really on the hard drive and how can I access my MacBook files I transferred?
View 3 Replies View RelatedI have a PowerMac G5 and need to purchase an internal RAID card to create a RAID 1 mirror of the system drive... one that will allow me create a Hardware RAID 1 mirror, not software RAID through OS X.
View 2 Replies View RelatedI just bought a Guardian Maximus RAID1 kit and I have two 1TB drives in it. I'm using it over Airport Extreme as an airdisk (mac osx 10.6.2)
My question is simply: am I running a risk by partitioning it into two partitions? Should I ever have to rebuild the failed disk (which I understand is really simple with the Guardian Maximus) - will it have trouble doing two partitions? I'm using one 500gb partition for time machine and one 500gb partition as redundant itunes/media.
I have a Lacie ext hard drive with 2 x 250gb HD that were one RAIDed into a single 500gb HD. I ran this update Lacie firmware update: http://www.lacie.com/support/drivers...r.htm?id=10053 And now my HD will only show up as two separate HDs of 250gb instead of a single RAID HD of 500gb.
View 6 Replies View RelatedI have a macpro with 4 x 1tb drives
Is it possible to get a highpoint raid controller and put those 4 drives in a raid 5 array (and then create partitions inside that array) - or do you need to have 1 drive by itself for the operating system, and then create a raid array using the remaining 3 drives?
Lastly, are the highpoint 3500 series a decent card? and fully compatible?
I have a new Mac Pro Quad 2.93 with the Mac RAID card installed with four 1TB drives setup in a RAID 5 array. When creating the volumes in the RAID utility, you can not edit them, resize, etc. If one large volume is created in the RAID utility, you can then partition that one volume using the Apple Disk Utility, which then allows you to resize if needed.
View 1 Replies View RelatedI'm using the software RAID right now. Everything is set as RAID 10. I want to move to a RAID card� if I keep it as RAID 10 will I still need to redo everything?
View 1 Replies View Relatedive put 4 of the hitachi 1tbs in my new mac pro.. and i really want to do Raid on them eventually.. and buy the pricey apple raid card.. i'll do it.. but speed wise:
How fast is a Sata connection straight from HD>Motherboard... ~75mb/s?
Is the Raid 5 config with all those drives much faster... around ~110mb/s?
Do you know if there is anyway to get a 5th drive into the raid 5 array? using the ODD space.. or some externals too... i need as much as space as possible...
And boot camp wont work with raid card anymore? I was thinking to have the startup disc be a raptor to increase speed on the apps, how would it integrate with the raid card, etc
I have a RAID 0 set up with two 1.5TB HDs. I am doing some reorganizing and want to take all the data on the RAID 0 and move it to one of the hard drives in the RAID 0 and create to single drives. Is there any way of moving all the data from a RAID 0 onto one of the HDs?
View 4 Replies View RelatedI am planning on getting a 2010 MP when they come and have a question about it. I am 90% sure that with my budget, I will not be able to after a RAID card. I am wondering if software RAID would be alright or if it's so bad it's not worth doing. Also, there is small chance that I could buy a RAID card later on, how would I install it? I will be using it for 3D animation with Maya and some zbrush modeling. Also I will be doing some Photoshop and illustrator and maybe some gaming on win 7 boot camp. Feel free to list any other pros and cons about either a software RAID or hardware RAID, I wana make sure I have all the details before making a final decision on it.
View 24 Replies View RelatedMy iMac has been crashing a lot lately and finally it's hard drive just up and failed. I have been doing hourly Time Machine backups to a concatenated RAID set (2 USB drives of 1 TB each). However, I think the iMac crashed while backing up and hosed the RAID controller.I've since plugged the two disks of the RAID into my MacBook Pro to see if I can repair them. I can see the individual disks of the RAID in Disk Utility. I can even verify and repair them. But i can't do that with the RAID in the sidebar, and it won't mount on the desktop. When I try to eject it from the DIsk Utility file menu, it says disks are in use.
I'm pretty sure my data on the two disks is intact, but I can't seem to get the RAID to mount as the single concatenated set on a desktop, which makes it inaccessble. Is there a way to repair the JBOD RAID without losing all my data, so I can then restore from the latest backup to my hosed iMac?
Info:iMac, Mac OS X (10.7.2)
I have never setup RAID before and this question may be totally stupid for that matter.
Can I setup RAID 1 (or call it mirroring) without the RAID card? I have two 1TB internal drives in my Mac Pro and I want to mirror them. I don't want to spend another 700 bucks just to setup a mirror.
Disk Utility shows some RAID options, but I am not sure how to use them, or if they will work at all without the RAID card.
On my 2009 Mac Pro, OS X's disk utility seems to allow the provision of making a mirror RAID or a stripe RAID.
Is it possible to shove in 2 drives, make a RAID 0 for two of them, and then add in 2 more drives to make a RAID 1 out of that RAID 0? (a RAID 0+1?)
I want to upgrade to 8 gigs, but Im wondering if I just get a single 4gig stick & have 6 gigs if my system would run just as well...I have 13inch macbook pro 2010.
Would 6 gigs be stable or unstable for use? If so whats best brand to get?
Is it possible to get 2 gigs of RAM into a Powerbook (12") or is it stuck at 1.25 gigs?
View 2 Replies View Relatedhe wants to give me his PS cs4, im prolly not even going to use it, should i take it anyway? itll prolly just take a couple gigs of my hd and i wont use it
View 5 Replies View RelatedI'm wanting to install 4 gigs of RAM to my MBP to get better gaming FPS and to play games I will be using Windows Vista 32-bit.I know 32-bit operating systems only recognize up to 3 gigs of ram so I'm not sure if I'll be fine and Windows Vista 32-bit will still work Will it still work under 4 gigs or will I have to get a 64-bit version of Vista?
View 6 Replies View RelatedI have the Alum 2.4 Ghz MBP and I want to max out the amount of ram it holds. It already has 2gigs and I've heard that it can hold a max of 4gigs () And was wondering is it worth upgrading just 2gigs? Will there be a difference is speeds? I also plan on buying SL while I am at it. Yes I am in the upgrade performance mood for my MBP. And unlike a PC you can't really improve the performance to much other than the ram. Also, can I buy some ram on newegg or does it have to be the overpriced Apple ram? Also can I mix ram types? Since it already has 2gigs can I just buy 2 more gigs of a diff brand but same type?
View 11 Replies View RelatedSo I have a uMBP 5,4 and a bunch of externals. I am going to be moving over 500 gigs of data from one external to another. They both have about the same speed read/write, but with the uMBP I only have one FW800 port. So my question is how should I connect these drives (the way I understand it you only get one 800 Mbps link to the computer and connecting multiple drives only allows them to share this through-put) Will it be fast to connect one via USB and one via FW800 or just daisy chain them using FW800?
I have a Mini (mid July 2010) that has worked flawlessly, yet I decided to install 8gigs of ram. At times I can have lots of things going on and with the original 4 gigs it seemed to bog down. Thinking more ram is the answer, of which it's apparently not, the Mini still can bog down even with the 8 gigs.
When checking Utilities and system memory it always has at least 3.5 gigs in a FREE status. No matter if I open almost everything. The system does recognize all 8 gigs it just does not use it all.
Is there some settings I need to tweak? All updates are installed. I'm not sure what to do to get the Mini to utilize all of its available ram. Or am I applying PC logic here?
Mac Mini mid July 2010 Intel Core 2 Duo 2.4
8 gigs of ram
Lion 10.7.4
Xfinity Extreme
DOCIS 3 modem
Airport Extreme
Info:
Mac mini (Mid 2010), Mac OS X (10.7.3), Awesome MACHINE!
I need to move around 40 gigs of music from my MBP to a Toshiba laptop. I have no form of direct connection (firewire, ethernet cable etc) and only have my wireless network. I'm new to windows (can't stand it) and don't have a clue where to begin, but I need to get it done. Tried a search but didn't bring up much that I found helpful/could understand. Any assistance would be very much valued.
View 6 Replies View Related