i don't have a backup of my macbook - 10.5.8am also in process of reassembling my old iMac G5 ALS - 10.5.8 also.Appreciate that from a boot disk perspective then the intel is a guid format and ppc is on apm.Is there anyway to have a single external disc to backup both.
ideally i'd just plug it into the firewire port and use carbon copy cloner on a regular basis.
Is there any special kind of whamma-jamma that might make installing your OS (and applications as well) onto the HD directly from the installer discs versus copying a clone of that system onto your HD any better than the other? Or are they both equally rock solid as far as your computer is concerned?
I recently partitioned my internal drive with an 80 gig partition to run Ubuntu , removed Ubuntu and now can not resize hd to recover the 80 gig that I used , there was a program with this Ubuntu install called rEFIt that was installed for the dual boot , My problem is that Itunes keeps crashing and I have spent somewhere around 8 hours trying to fix this issue and in the process I discovered that I now can not boot from the osx disc but I can boot from the Ubuntu disc , what can I do to correct this issue or is there anything that I can do to correct this and recover the 80 gig that I used ?
Info:
iMac, Mac OS X (10.6.8)
Got a Powerbook G4 with a "messed up" HD. Couldn't fix it, so got a firewire drive and ran a bunch of utilities from my newer intel iMac. Cloned the Powerbook's drive to a USB hard drive, did all repairs on the USB drive, formatted the Powerbook, cloned the USB drive BACK to the Powerbook, but it just gives me the flashing question mark when I try to boot.
What is REALLY weird is I can boot my iMac FROM THE CLONE ON THE USB DRIVE and it works fine.In Drive Genius the Powerbook drive (in TDM) shows as a single drive, but if I go to "Repartition" then it shows 3 smaller partitions on the drive; I believe they're called "Apple Free Space" or something like that (can't check right now, I'm running Repair on it AGAIN at the moment).
I feel like I'm missing something simple, like the machine just doesn't see one thing that tells it "Oh, yeah! There's an operating system on this drive!" I have tried partitioning from Drive Genius and Disk Utility. Have done clones back and forth with Drive Genius, Disk Utility, and Carbon Copy Cloner. Same results each time.
I recently had to wipe my entire hard drive. I made a clone of my Windows 7 partition before doing so, but am now unsure about how to restore it. Is it possible to restore without first installing Win 7 from scratch, i.e., is there any chance I could partition the drive using the Boot Camp utility then simply copy the entire file system over?
View 1 Replies View RelatedI'm planning to replace my boot hard drive with a pair of RAID0ed SSDs. In order to familiarize myself with certain techniques I have build a software RAID0 from two 160 GB Maxtor SATA I hard disks. That went pretty much without problems. The two HDs are now sitting in position 1 and 2 in my Mac Pro.
The problem arises when I try to clone my boot drive onto the new RAID 0 drive. I was using disk utility and got an error message. Then I thought my fault was using disk utility from the HD which I wanted to clone and booted from the Leopard install disk. I then used disdk utility from that source to clone the HD boot drive to the RAID. Again I got the error.
What is going wrong? Do I have to approach this completely different?
I use carbon copy clone for my mac to copy boot drives, what do I use for the windows boot drives/partions to move to a different drive?
I've got Mac OSX on one drive and Windows 7 on another and will be installing a 160gb SSD drive for boot drive this weekend. I just want to copy the windows boot drive to the SSD drive partion I've created for windows.
I want to clone my old pc's hard drive so I can boot it up on my iMac via Boot Camp and it will be identical to my PC - is this possible?How would I go about creating a disk image of my PC hard drive and then loading it up in bootcamp?Bootcamp will provide all the drivers I need but what about the old drivers installed for the PC hardware?
View 6 Replies View RelatedI recently bought a Macbook Pro with a 200gb hard drive. Right now I am running bootcamp dual-booting OSX 10.6.5 and Windows7 100gb partitions each. I just got done configuring everything and then my friend offered me a 500gb hard drive for $50 so of course I had to buy it.
I am wondering if it is possible for me to clone the hard drive I currently have to the new 500gb hard drive and then extend the partition sizes so I don't have to go through and reinstall everything on the Windows side again.
I recently installed Boot Camp with Windows Vista. i partitioned the drive 50-50 and now i am running out of room on both partitions.
I am familiar with Ghost on the PC side but is there a software that will CLONE my Mac partition and Windows partition all in the same process? When i go to Disk Mangement in Vista, it recognizes four partitions. 1 for vista and the other 3 for Mac.
My internal HD failed. I have a recent Super Duper bootable Clone connected with FW800. The option key at startup doesn't allow me to access the clone drive. I press the start key, wait for the "bong," hold down the option key and nothing happens - just whiring, some crunchy sounds and a solid blue screen. I was able to reset the PRAM using the command-opt-P-R keys and got the 2nd "bong", but that hasn't helped the problem. It's a 2008-9? MBP running 10.6.? I've order a replacement internal drive. I was hoping to be able to boot to the clone and work in the meantime.
View 1 Replies View RelatedGetting OCZ SSD to install on MacPro 08 in second optical bay. Must have User files on separate drive due to SSD will barely hold system. I figured I'd have to clone my primary boot drive to spare partition, boot from clone, setup it up with User in other location from SysPrefs > Users > control click current user > advanced options, restart then dump items form User in order to have the drive sized for the SSD. Once the intermmediate tranfer drive was set up, clone it to the SSD and use as boot.
I tested clone before actuall data transfers. Problem is after switching User file location from the booted clone, restarting, but re-booting looks like clean install. No preferences showed up, missing all but stock apps in dock, desktop image back to clean install, printer needing registration.Tried advanced options again to locate User on same original boot drive, restart, same thing. I did not remove User files yet from the cloned drive which I was booting. Just switched location.
Info:
Mac Pro, Mac OS X (10.7.2), MacPro '08, 2.8 Octo, 12GB, 5TB
I'm using a 20" white intel iMac and cannot manage to remove a linux boot disc from the optical drive.At first, the only way that i managed to boot to the linux disc in the first place was from the Startup Disk menu in OSX. I could not even get to the Startup Manager ('opt' at boot) or boot straight to the disc ('C').Now i'm in a position where no matter what i do, the system boots to the linux disc. I cannot even force the startup into OSX to try to eject the disc from there. I've tried holding all of these keys/combinations at startup
View 3 Replies View RelatedI have a Macbook running on snow leopard and I wanna upgrade my internal hard drive as it is currently too small. I downloaded Carbon Copy Cloner and cloned my entire hard drive to an EXTERNAL HARD DRIVE. Now, I have that new internal hard drive from wester digital. What do I do with it? replace the current internal hard drive with the new harddrive and then how do I get the data from the external hard drive with my cloned data to the fresh western digital? Do I boot first from external hard drive etc? I am not sure what to do now?when I was given the option which hard drive to clone (or which part of the hard drive to clone) there was also the option to clone "Install Disk". I don't need to clone that, right?
View 3 Replies View RelatedMy iMac is making the most terrible noise when burning a disc, and after two or three tracks are burnt it gives me an error message and then will not burn anymore?
Info:
iMac, Mac OS X (10.6.8)
i can't insert any disc in my disc drive slot something is blocking insideside
View 9 Replies View RelatedI have a disc full of photo's stuck in the disc drive on my imac. When I try to eject it, I get a spinning rainbow circle and have to do a hard shut down. It sounds like it is trying to eject it, but then gets hung up.
Info:
iMac, iOS 5.1
how I can copy a music disc to a blank disc. I'm on an iMac?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
I am getting an Ibook G3 from a friend and it is kinda old, I think the HD is about 20gb and i am sure it is running panther. I would at least like it to run tiger, that is what i have in my intel mac mini. Is there a way to clone the HD of my mini and maybe get a slightly bigger HD for the ibook and just use the clone from the mini in the ibook? I dont want to put much money into the ibook as far as buying the os and such because im sure it has or will get the gpu problem sooner or later. I just want to know if it is possible to do this task.
View 5 Replies View RelatedWhen I travel I would generally take a small travel drive that is clone of my white MacBook as a rescue drive.Now that I have the MBA I am wondering if I could just clone my 11.6 MBA to a 64 GB flash drive and then if the worst happened I could reverse clone from the flash drive to the MBA.
View 8 Replies View RelatedGetting Incorrect disc name when trying to burn a disc. is there a particulare fomatt I should be using?
Info:
iMac
I want to Clone videos from my SD Card quickly without having to download the entire card while filming..
Info:
iMac, Mac OS X (10.7.3)
I dont know the password to a MAC G5 I bought. I have a G4 install disc and two white install discs witha leapord skin X on them one says install disc 1. the G5 wont boot to the install disc when I push the C key. I have reset the PRAM 1, 2 and three cycles. It wont boot to the G4 disc either. Disc is version 10.2
View 1 Replies View Related24" iMac, 3.06 Ghz CPU, 500GB HD, 2GB RAM
My imac locked up on me the other day while watching a DVD. There were a few lines and splotches on the screen in various colors and the system just became unresponsive. I rebooted and the system came right back up, but when I started the DVD, it immediately crashed again. After that point, every time I tried to boot, it went straight into kernel panic (You must restart your computer message).
I tried resetting the PRAM, but that didn't help. I also did the hardware diagnostic test (hold D during boot) and that said everything was OK.
I was able to boot from the CD. After a few unsuccessful attempts at restoring the OS from backup, it finally worked. Previous tries only resulted in the system locking up. Once I finally got everything running again, the system worked great. I worked it pretty hard in the next 24 hours after fixing it. No problems during use. Then I left for a few hours and came back to LOCKED UP COMPUTER AGAIN! Same squiggly lines on the screen.
Now I can boot into the hardware diagnostic test if need be. However, I can't boot into the computer any other way. Booting from hard disk, installation dvd/cd, and even Safe mode all cause a kernel panic. Also, I might add, that I had all peripherals unplugged from the machine and still got the kernel panic messages.
Any ideas? Closest Applestore is 3 hours away. The closest private licensed repair place is 60 miles away. I called Apple Support and they pretty much blew me off because My AppleCare was up about 6 months ago and I'm sure this would be a hard case to do over the phone. They suggested I take it in to get looked at.
my Macbook crashed and upon reboot I got the glowing white screen of death over and over. Slipped in my OS X install disk to try to boot from that to get to the disc utility (holding C to boot from disc drive), but when it fires back up, I keep getting the message that I need to restart my computer! Shut it all down and rebooted several more times but I keep getting the same infernal screen to restart I'm trying to finish a major project by the weekend.
View 1 Replies View RelatedI want to format my macbook pro and reinstall osx Problem is, i can't boot up the machine via the install disc I've tried holding down the c key, i've tried holding down the options key and selecting install disc. Just loads forever until screen turns black.
View 13 Replies View RelatedI have the latest MacBook Pro. I lost the CD that came with it. I'm attempting to reinstall Snow Leopard using a retail disc purchased from Apple. I've tried booting it by holding "C" and by holding "OPTION" and selecting the disc. I've also tried reseting the PRAM. It goes the the Apple screen and I can hear the disk spinning. Then it just hangs there.
Could this have anything to do with the fact that the computer came with 10.6.3 and I'm attempting to install 10.6 from the retail disc?
My 13" MBP (Spring 2010) will NOT boot from an OS X Snow Leopard disc (disc or USB bootable). I get a Kernal panic every time with the window shade and 20 languages telling me to restart my computer.
View 2 Replies View Related#I recently acquired a 1.6 GHz G5 PPC, and I'd like to install Linux on it. I had to put in a new hard drive, so I put in a Seagate, 7200 RPM, 3.0 gb/s, 250 GB (just came yesterday). I'm not having any luck getting it to boot from a Linux disc though; my friend gave me a version of Feisty Fawn, no luck. I tried burning a copy of ubuntu, version 7.10 for PPC, from Apple's native utility but that didn't work either. I know that the super drive is reading, though, because if I put in my Macbook Pro copy of OS X it gives me angry messages. When I press the option button on restart, I get a blue screen with two buttons; a return button and a forward arrow button. Also, what's the right way to burn Ubuntu to a disc; I tried using FireStarter FX but it kept on telling me that burning could not be completed.
View 9 Replies View RelatedI recently acquired a Macintosh 128k, and when I turn on the machine, I get a symbol of a floppy disc with a question point blinking inside. I believe I need a boot disc to get the unit running. If anybody could please offer me a boot disc, either to purchase or to get for free.
View 6 Replies View Related