a couple of days before my wireless track pad and keyboard would have trouble connecting when computer is waken after sleep mode. Then one day my mac mini just suddenly stopped going in a physical sleep state. When I go to the apple sign and put the mac mini to sleep the screen turns black like usual but once its put to "sleep" the light indicator on the mac mini will not blink neither will I hear the hardrive slow down. whats going on. This is the standard $700 model mac mini mid 2011.
I just got a new Mac Mini, and I notice that when it's in sleep mode, the hard disk is constantly spinning up and then spinning down again. It spins down roughly every thirty seconds, the power light starts blinking in the "I'm sleeping" pattern, but then the drive spins back up in a matter of seconds and the light is on constantly until the next spin-down. I've tried turning off the network, disconnecting the display, fiddling with the Energy Saver settings, quitting all programs, all to no avail. All updates are installed.
For the last few days, since carrying out a software update (dont know what update!) when I select "sleep" from the main apple menu my screen goes to sleep but my hard drive keeps running, how do I correct this so the whole thing goes to sleep?
As I've read in many threads there's no way to turn off the blue light, even when my imac is off or sleep, and even thou the hdd is (or might) be asleep, the light always stays on... over all this is not a huge deal, but since the imac is in my room sometimes the light it's a little annoying. I was wondering if anyone here has an external hard drive that goes to sleep and even the lights turn off completely..
Specially if it's a famous brand.. like WD or anything along those lines.. since I'm looking to upgrade my external HDD i figured it's a good to know.. otherwise i'm going to just upgrade to the 1tb Lacie.. I'm considering the 1tb "My Book" because even thou I read that the 500gb had a lot of issues apparently the 1tb one is a lot better.. has anyone has had this drive? Any issues?
I have a new 17" MBP and recently it stopped going to sleep on its own. I can force it to sleep my apple menu or shutting the lid. I have tried everything I can think of... all programs closed, nothing running (to my knowledge) and in activity monitor it shows the disk activity writting every 20 seconds or so... my only conclusion is that it's not letting the HD become inactive long enough to send to sleep... can someone please help me with this?
I will try to be a little more clear in describing this one: I use a 500GB USB Hard Drive for storing Music, Videos, Photos, etc. I have my entire library for iTunes, iPhoto in there. Here's the problem. When I mount the drive to use it, it works fine. If I stop iTunes for 5 minutes or so and then try to open up another file from the drive I can hear the hard drive start to spin inside the enclosure, but it just hangs, forcing me to unplug it from the USB port, giving me the fail to eject warning message. When I re-mount it again it works fine, but I imagine doing this is damaging to the files and folders. Anybody else had this problem? Is there any way to adjust how much time of inactivity will cause the drive to sleep?
Clearly there must be a way to do this, right? Can I install off an external hard drive? Off a USB drive? Share my macbook pro's DVD drive somehow? If the hard drive on the mac mini is completely reformatted and I plug it into the USB port on the external hard drive which I partition and install the Leopard DMG would it be able to boot off of it?
I bought an optibay clone and put it in my 2010 Macbook i5. I have an SSD residing in my standard hard drive bay (because of potential hibernate issues) and the 5400rpm Apple drive + optibay clone in the Superdrive bay. How do I sleep/spin down the 5400rpm drive ? Unmounting doesn't seem to help. Put disk to sleep option in preferences is selected, but it keeps spinning and spinning. What options do we have for sleeping/spinning down this drive within OSX ?
The last couple of times I have woken my MBP up a box has popped up with a big red sign in the middle saying my external hard drive was removed unexpectedly and could have caused loss of data. I know this is not healthy and I would like to stop it doing this as soon as possible. It is connected via firewire 800 and is a western digital 250 gig my book pro if that makes any difference. I close the lid of my laptop with it still on and connected and everything is supposed to sleep. It used to work fine, I would open the lid and everything would wake up and I could do what I was doing before with no error messages and the hard drive would still be mounted on the desktop.
i dunno if this is new or everyone already knows bout it, but when i stacked one macbook air on top of the other with the bottom one sleeping, the one stacked on top also goes to sleep even if it was turned on. i tried this on a friends macbook air and this happens. is it coz of the magnetic fields in the hard drive? anyone with 2 macbook airs on hand should definitely try this.
I'm on an early 2008 mac pro - used to be on a Powerbook G4. I have a 300 GB LaCie d2 Extreme external HD connected via firewire 800. Both are in 10.5.2. While on my powerbook, the drive behaved normally - fell asleep after no use, then awakened when I needed to access something. On my new mac pro, the drive behaves strangely. I only use it for backup, so it's only accessed once a day. The rest of the time I do not use it. When it's not in use, the drive sporadically wakes and sleeps. I've tried to pinpoint the cause to no avail.
I've tried all the usual suspects: browsing the forums, checking the "hard disk sleep" preference in energy saver, switching the firewire 800 cable with usb and firewire 400, watching activity monitor to see if there's a program accessing the drive (haven't found anything, but that doesn't mean it's not there). None of it works.
So basically, my hard drive is dying (clicking/chirping noises, random freezes), but for now it seems to keep working and until it finally breaks, I want to put as little load on it as possible and was wondering whether its better to put the machine to sleep at night or turn it off completely? I realise it's fairly minor by itself, so in addition I'm trying to stream as much video as possible instead of downloading, I've got it constantly hooked up to an external making hourly TM backups, also got a carbon copy bootable clone made.
I've bought 8 months ago external hard drive Seagate FreeAgent 1TB (USB 2.0 7200 RPM 32MB cache), till last week disk was plugged in to pc and everything was great. Now its plugged to mac and the problem is, the hard drive all the time going to sleep after minute or two. I've turned off sleeping disk in system pref., also i used command sudo pmset -a disk sleep 0. App from seagate is a piece of **** I've made full format from ntfs to mac hfs. Nothing helped! Is there any solution to resolve my problem?
I'm running out of space on my Mac Mini's disk because of all my iTunes video files. I am thinking about buying an enclosure for my spare 1 TB hard drive, and using it as the location of my iTunes library, but I wondered how it works with the Mac Mini's energy-savings mode. My Mini is set to sleep after 15 minutes of inactivity, then wake when iTunes content is requested by my Apple TV or Airport Express. I like it, because it's very energy efficient that way! My question is, will the disks also sleep along with my computer, and will they wake properly when the computer wakes?
My computer (MBP 5,5) makes this sound several times throughout a day of use. It sounds exactly like the little "click" sound the computer makes, when i close the lid and have it go into sleep mode. I guess it's the hard drive going to sleep sound? If i'm right, i really don't understand why the hard drive goes to sleep at these random times. I've disabled that in System Preferences - at least i think so. It's this option, right?: [URL] Also, my MBP is always (only use it as a desktop with an external monitor connected to it) on a mStand on my table, so it can't be the Sudden Motion Sensor either.
Is there a way to disable hard drives from automatically going to sleep mode (spinning down). Energy saver (System preferences) already has "put hard disk(s) to sleep whenever possible) turned off, so this must be done from the drive itself. The drives in question are a 3.5" ATA drive from Western Digital (WD5000AAKB) and a 2.5" Seagate SATA drive (Disk utility doesn't tell me which drive model it is, so I have to physically open the enclosure to find out). They're both placed inside external Firewire 800/USB enclosures.
Lately I've noticed that whenever I put my Mac to sleep, I lose a few megabytes. At first I didn't think anything about it. Until one day I let sleep for a while I was doing something, and came back to, and saw that I had lost about 300 megabytes. While it was in sleep, no applications were running and nothing was downloading. My mac is Macbook pro, 3 years old, 120 gigabyte, 2 gb of ram, 2.33 Ghz Intel Core duo, Model Identifier: 2,2, and Serial Number:W86481HGW0H Right now it's running leopard. I'm about to upgrade to Snow Leopard. So why would it lose this hard drive space when it's in sleep mode? By the way, I bought it used one year ago. So I've only had it a year. I haven't downloaded anything from any untrustworthy websites. I only download things from trusted sources(i.e. itunes.) Please help. Right now my only solution is to keep a close eye on it, and make sure that it does not go to sleep!
I have a 2008 Mac Pro with the original OSX drive and then two other hard drives, one I use for Boot Camp/Fusion and the other for my work files. Under Energy Save in system preferences, I have it so that the drives will sleep whenever possible. The issue I'm having is one of the drives, I think the one with my work files, will wake from sleep every 15 minutes or so even if I'm not accessing any of the files. I haven't timed it exactly but it's around 15-20 minutes and happens throughout the day. What is causing the drive to wake? I disabled iStat Pro because before the drives would spin every time I checked my dashboard so that's not the problem anymore.
I put it on Craig's list so wanted to wipe the drive and figure I'd play around with OS 9 a little just for fun. While in OS 9 it prompted me to upgrade the firmware on the DVD-ROM drive. I thought that sounded like a good idea since it makes some terrible noises when a disc is in... anyway, I did the firmware upgrade and everything went fine. That's the only real change I can think of that might have contributed to this new issue.Anyway, after that I put 10.3 on it again (I had 10.4 on it before) and it wouldn't sleep correctly. Everything looks like its going to sleep ok, then the hard drive spins up, then back down, over and over again endlessly.
So, I just had the original 300 GB hard drive fail in my aluminum 24" inch Mac running the latest update of Leopard. I wasn't able to save it using diskwarrior (diskwarrior said it was some sort of mechanical failure) but I was able to recover most of the data from it by booting from an external hard-drive.
So I went out and purchased a brand new Western Digital Caviar Black 1TB drive. The install went fine, it found the drive partitioned it and installed Leopard successful. Then is crashed and disappeared when I left it alone to run all the software updates. I came back and the computer was stuck on "Restart Required" after downloading all the updates.
I went to hit restart now, and the system just hanged, wouldn't do anything. So I hard powered down the system and restarted it. It came up with nothing, just stuck on the White Screen of Death. So I plugged the external drive back in and booted from it. Mac OSX couldn't find the drive and diskwarrior would crash if I tried to run it. I tried to boot up from the OSX start-up disk and it couldn't find the drive either.
So I took the case apart and made sure all the connections were solid and the drive was mounted correctly. Everything looked fine so I plugged it in and it started up fine. Finished the updates and the iMac ran great. So I thought maybe it was overheating, so I've installed smcfancontrol and started to monitor the temp of the drive. I also took the mac apart again and sucked out any dust in the fans or vents. The drive never goes over a 105 F, so it doesn't seem to be overheating.
However, this is where the problem is consistent: everytime the iMac goes into sleep mode, it crashes and the iMac is unable to find the hard-drive again. Unless I unplug it completely for 5 minutes or so. Once I unplug it, it finds the drive and operates like a champ.
I have Snow Leopard (10.6.8) installed on a solid state drive (SSD). I'm wondering how I can check whether my internal hard drive is spinning or asleep. Is there a diagnostic to test whether a hard drive is spinning?
Info: iMac (27-inch Mid 2010), Mac OS X (10.6.8), 12 GB RAM
When my iMac 27" is in sleep mode I have noticed that the hard drive spins up very regularly every 4 or 5 minutes. Also when placed in sleep, the monitor takes about 30 seconds to go black. It also wakes on its own for no apparent reason. No new software has been added, only normal updates, running Lion. Time machine backup is done every couple weeks.
I just had the original 300 GB hard drive fail in my aluminum 24" inch iMac running the latest update of Leopard. I wasn't able to save it using diskwarrior (diskwarrior said it was some sort of mechanical failure) but I was able to recover most of the data from it by booting from an external hard-drive.
So I went out and purchased a brand new Western Digital Caviar Black 1TB drive. The install went fine, it found the drive partitioned it and installed Leopard successful. Then is crashed and disappeared when I left it alone to run all the software updates. I came back and the computer was stuck on "Restart Required" after downloading all the updates. I went to hit restart now, and the system just hanged, wouldn't do anything. So I hard powered down the system and restarted it. It came up with nothing, just stuck on the White Screen of Death. So I plugged the external drive back in and booted from it. Mac OSX couldn't find the drive and diskwarrior would crash if I tried to run it. I tried to boot up from the OSX start-up disk and it couldn't find the drive either.
So I took the case apart and made sure all the connections were solid and the drive was mounted correctly. Everything looked fine so I plugged it in and it started up fine. Finished the updates and the iMac ran great.
So I thought maybe it was overheating, so I've installed smcfancontrol and started to monitor the temp of the drive. I also took the mac apart again and sucked out any dust in the fans or vents. The drive never goes over a 105 F, so it doesn't seem to be overheating.
However, this is where the problem is consistent: everytime the iMac goes into sleep mode, it crashes and the iMac is unable to find the hard-drive again. Unless I unplug it completely for 5 minutes or so. Once I unplug it, it finds the drive and operates like a champ.
I think maybe there's an issue powering the drive back on? Anyone have any ideas?
And my follow up posting later that day:
Quote:
So I ran some tests just to see if was an overheat issue, hard drive malfunction, or sleep issue. I decided to start encoding a video, pulled up Word, Power Point, Excel, started downloading all 6000 mail messages off my server (I never delete my e-mail :-/), also started installing iLife 09, and pulled up a bunch of webpages in Firefox with multiple tabs.
However, I shut off all sleep mode options on the hard drive. I let it run for an hour and came back. Everything is fine, hard drive isn't locked up and smcfancontrol shows the hard drive running pretty hot (115 degrees) but not so hot I'm worried. So it's definitely something to do the hard drives going into sleep mode and not powering back on. It's also weird that I have to leave the computer completely unplugged for 10-15 minutes before the drive is recognized again.
So turning off sleep seems to be my work-around, however, this shouldn't be a long term solution. I'm worried that there is a bigger issue with the iMac, but I'm not sure what would cause this. I've been a PC guy for years, this was my first Mac, and honestly I don't know enough about the inner workings to narrow this down. I would assume this would have to do with the motherboard in some way? But I'm not sure how you would even test it.
I have a 2011 Mac mini with a 500gb hard drive. I want to upgrade it, have bought a Cruical M4 64GB SSD, WD Scorpio Black 750GB 7200 rpm drive and a second hard drive cable. I want to replace the 500gb drive with the 750gb drive and install the SSD. Then run the OS, PS and LR from the SSD. I want to clone my current drive to the new one but once I get both drives installed is there a way to remove the OS from the HDD? Can I do this or do I have to start from scratch and then reload everything? Really don't want to do that.
Basically my hard drive randomly decided not to mount. It is a 60gb USB external hard drive. I have used a different mac, a PC and both didn't mount the hard drive. On windows it can not recognize the driver to mount but on mac nothing! I even tried external power, different USB leads and a new one. Still nothing. I think it may have become corrupt.
My time maching back up is 60 GB less than my Hard Drive and I know that the back up is an accurate count of used GB's as I have been keeping an eye on this. I recently empltied my trash and found 15 GB's but I am still showing a 60 GB difference between what my MAC HD says vs. my Time Machine back up HD. How could this be? and where could I possibly missing 60GB. I would think if they were actually used somewhere that Time Machine would be backing them up as well.
I am running Mac Mini as a home server (turns out to be not a great idea, btw), and even though I set the preference to never sleep or shut down, it does go to sleep when there is no activity for long time. Since I am using it as home server, it should stay awake all the time or at least wake up from sleep when there is incoming ping from other computer, but it just goes to sleep.
My son is having a BIG problem with his Mac Mini. His Mini has a 1.83GHz Intel Core 2 Duo processor, memory of 3GB 667 MHz DDR2 SDRAM and runs Mac OS X Version 10.6.3. He has Time Machine and also a 1.5TB desktop hard drive. From time to time, he has been getting pop-up warnings that his internal hard drive was about to become full. He would then do some deleting and things would be fine until the next pop-up. Last week, after watching some videos on Utube, he tried to open iTunes and, instead of a pop-up, got an error message with some numbers (which he didn't write down). It began the usual routine, starting with a white screen with the apple logo in the center and the loading circle spinning right below it. After that, it normally goes to a light blue screen and then loads the desktop, but this time (and ever since) it stopped at the blue screen, empty except for the message "Hard Drive Full, Please Delete Data".
Apparently the screensaver still works, but not much else -- like the Finder. He said that he did get something to appear on the top bar by taking the batteries out of his Apple Bluetooth keyboard, bringing up the "Bluetooth Setup Assistant", but once a wired keyboard is plugged in, everything on the top bar disappears (since the Mac sees a keyboard). He was going to do a "restore" and, in preparation, thought he had done a successful back-up to his external hard drive using the Time Machine feature. However, when he checked the Time Machine under System Preferences it said that the external HD had nearly 1.5 TB unused (only a couple hundred pictures or so on it) and the Time Machine was supposed to put about 70GB on there. So now he is concerned that he didn't/can't do a back-up.
