OS X :: External Hard Drive Goes To Sleep Completely?
Apr 20, 2009
As I've read in many threads there's no way to turn off the blue light, even when my imac is off or sleep, and even thou the hdd is (or might) be asleep, the light always stays on... over all this is not a huge deal, but since the imac is in my room sometimes the light it's a little annoying. I was wondering if anyone here has an external hard drive that goes to sleep and even the lights turn off completely..
Specially if it's a famous brand.. like WD or anything along those lines.. since I'm looking to upgrade my external HDD i figured it's a good to know.. otherwise i'm going to just upgrade to the 1tb Lacie.. I'm considering the 1tb "My Book" because even thou I read that the 500gb had a lot of issues apparently the 1tb one is a lot better.. has anyone has had this drive? Any issues?
View 2 Replies
ADVERTISEMENT
Dec 8, 2014
I have an external hard drive (my book) by WD.... When I plugged it in today it did not open and reported this error:
Catalog file entry not found for extent. The volume could not be verified completely
ERROR: This disk needs to be repaired. Click Repair disk.Â
My question is if I hit repair will I loose all my files? I need these files!!Â
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.2)
View 3 Replies
View Related
Sep 18, 2007
The last couple of times I have woken my MBP up a box has popped up with a big red sign in the middle saying my external hard drive was removed unexpectedly and could have caused loss of data. I know this is not healthy and I would like to stop it doing this as soon as possible. It is connected via firewire 800 and is a western digital 250 gig my book pro if that makes any difference. I close the lid of my laptop with it still on and connected and everything is supposed to sleep. It used to work fine, I would open the lid and everything would wake up and I could do what I was doing before with no error messages and the hard drive would still be mounted on the desktop.
View 7 Replies
View Related
May 29, 2008
I'm on an early 2008 mac pro - used to be on a Powerbook G4. I have a 300 GB LaCie d2 Extreme external HD connected via firewire 800. Both are in 10.5.2. While on my powerbook, the drive behaved normally - fell asleep after no use, then awakened when I needed to access something. On my new mac pro, the drive behaves strangely. I only use it for backup, so it's only accessed once a day. The rest of the time I do not use it. When it's not in use, the drive sporadically wakes and sleeps. I've tried to pinpoint the cause to no avail.
I've tried all the usual suspects: browsing the forums, checking the "hard disk sleep" preference in energy saver, switching the firewire 800 cable with usb and firewire 400, watching activity monitor to see if there's a program accessing the drive (haven't found anything, but that doesn't mean it's not there). None of it works.
View 3 Replies
View Related
Oct 6, 2009
I'm running out of space on my Mac Mini's disk because of all my iTunes video files. I am thinking about buying an enclosure for my spare 1 TB hard drive, and using it as the location of my iTunes library, but I wondered how it works with the Mac Mini's energy-savings mode. My Mini is set to sleep after 15 minutes of inactivity, then wake when iTunes content is requested by my Apple TV or Airport Express. I like it, because it's very energy efficient that way! My question is, will the disks also sleep along with my computer, and will they wake properly when the computer wakes?
View 5 Replies
View Related
Jul 1, 2012
only the sleep button under the apple logo puts the hard drive to sleep it doesn't do it automatically though energy saver and a timed sleep?
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.4)
View 2 Replies
View Related
Dec 5, 2010
Not exactly sure what happened, but I think it has something to do with the new iPhoto? I booted it for the 1st time off my external drive to create a X-Mas Card and imported 4 photos into it. Don't know if after opening it, it attempted to import all the photos from my external drive to my internal drive? Don't know why it would do that but there is no sign of it in the Pictures folder. Any ideas? Only other thing I did was sync my iPad, so I went into my backups and deleted all those files and it freed up 16gb. I started last night with 44 gb and don't know where in the f the rest of my space went? I've used DriveSlim to attempt to find any wasted space, but nothing turned up Is there a way to see specifically what happened last night?? I have Time Machine running I've restarted my comp, and still stuck around 16gbs......clueless as to where this Hard-drive space is being used. I've gone thru all my main folders (pictures, music, movies, etc...) and its not being wasted their....has to be hiding somewhere in my Library or what?
View 14 Replies
View Related
Feb 18, 2009
I am going to be getting rid of a PC soon and I would like to know how to clear the hard drive completely clean so that no one who takes the machine if I throw it away attempts to take control of things that are on this computer. Also, I may let my dad or mom clear the hard drive but I don't want to let them do so if there is any way they look at the stuff that I've looked at on the hard drive.
View 24 Replies
View Related
Mar 31, 2009
How do I clear the entire macbook as if I just received it new? I still have the two installation discs it came with.
View 5 Replies
View Related
Aug 28, 2009
I just bought this and i have 24 MB left on my macbook, is there an option in the installer to format the hard drive?
View 5 Replies
View Related
Dec 26, 2009
Time machine only backs up the changing files in Mac. I want to use Time machine so it can back up my drive completely. From my music to pictures, to Apps to settings. I have a Case sensitive structure and I am about to format it to a non-case sensitive. And I want to back up everything. Is time machine a program for me?
View 2 Replies
View Related
Jun 23, 2012
I have an old (late 2006) 20" iMac. Problems started a few weeks ago - first the computer would freeze and crash. Eventually I started getting either a circle/slash sybol or the question mark folder every time I tried to reboot. Eventually I concluded that the hard drive had gone bad. So I bought a new 1TB Barracude from OWC and installed it following instruction found on [url]....
Now I can't do anything. I tried booting from a OSX 10.6 install disk, but the machine simply spits it out after about 30 seconds and gives me the "?" folder. So I got my hands on 10.4.5 Universal Install disk and tried that, thinking that maybe the older machine needed an older version to start from (sounds logical at least). Nothing. It doesn't spit that one out, but still ends up with the flashing "?" folder after a minute or two. I've tried holding down C on startup. Same result. I've also tried holding option to get the startup manager, but that doesn't work either. I just end up back at "?". I really hate "?"
Info:iMac
View 3 Replies
View Related
Dec 25, 2010
I got a second hand macbook pro on tuesday, it is the 13" 2010 model and is two months old. However it keeps causing me all kinds of problems, and I am not sure if it is my fault, a hardware fault or something else. I'll describe what I've done to it; When I got it I wiped the hard drive and did a clean install of OSX, then I imported everything from my old mac through migration assistant. However when I then started using my new mac, the 'home' folder was a different name so some files didn't match up, like my dropbox account and some games. I don't know if this has caused other problems within the directories or anything like that.
It is usually fine for about 6 hours, it's pretty quick and I have been through disk utility in this time and the verify process has been ok. However after this time the it starts being really slow. Like I'm talking 10 - 15 minutes to open an application. Every time this happens I open disk utility to check on it, and it always needs to be repaired as there are folders and directories missing. However when I turn it off and go into disc utility through the install disc it doesn't let me repair it as the drive cannot be unmounted, but then the HD disappears from disk utility completely.
On top of this I tried to install XP through boot camp earlier, but the partition wouldn't format, so I went back through boot camp assistant and deleted the partition. However whenever I turn it on I have to hold down the command key and select the Macintosh HD, because if i don't it tries to boot into windows, even though the partition has been deleted and the HD merged back into the Mac HD. When I boot through the command key, the only option there is the Mac HD, so I don't know where it is getting windows from.
The battery is not what I expected in this thing either. I have put this on another post but I wanted to complain about it again. I have noticed that on a full charge i only get 6 - 7 hours browsing the internet, way off the 'approximately 10 hours'. When I go into istat menus apparently it has a cycle count of 68 and the health of the battery is 89%, which seems very low to me. Whenever I do manage to get it to turn on, it never remembers my settings for the back lit keyboard or the screen brightness. They are always on full whack even though I turn them down to half every time I use it.
Basically, on this fine christmas day (don't get me started on that, the dog got more presents than I did and now my mum is singing Susan Boyle at the top of her lungs) I was wondering if any of you could help me with these problems? I'm thinking I may just have to wipe the HD again and reimport everything manually but I really don't want to do that. I do love Apple Macs and I don't want to get rid of this thing, but it is driving me mental. I turned the Macbook Pro on when I started writing this on my old Macbook. It is now 8 minutes later and it has still not booted. It is just sat there looking all smug with the spinny thing below the apple on the grey screen.
View 18 Replies
View Related
Aug 12, 2009
I'm about at my wits end. I would say I have a harddisk failure, but it passes every diagnostic I can throw at the thing. My problem is that I erased the main drive in my mac (been booting from an external hd) and I'm trying to install Leopard on this drive. The Leopard install starts, I'm able to choose the disk, and tell it to erase and install (or just install after erasing the disk externally). The installer starts, gets about 30-40 minutes in and then just plain stops because some package or other (seems to be different every time) is corrupt. My only option is to reboot and try again. I've done it three times now and am starting to feel rather stupid. Is there a known issue here that anyone can direct me at? I didn't see anything snarfing around the forums, but that doesn't mean I could've just plain missed it. I've just finished running tech tool pro 4 hardware tests (drive controller, etc.), surface scan, disk utilities erase and verify hoping it would tell me if there is a disk problem brewing. So far all the tests show green. I decided to try and hit the thing with something that writes to every imaginable space on the disk, so I ran erase free space from disk utilities. I plan on trying again after that finishes.
View 2 Replies
View Related
Dec 2, 2009
I spilled coffee all over my MacBook Pro and since it is not covered by AppleCare it will cost $1,200 to fix. I can still turn it on but most of the keyboard isn't working properly. I got it back in July 2007 (15" 2.4ghz 160gb) and I think I'm going to buy a new one. I managed to get all of my school work off of it even thought it took awhile and was very frustrating. My question is, is there anyway to completely wipe the hard drive then sell it? I was trying to look on eBay
View 16 Replies
View Related
May 19, 2012
The volume Macintosh HD was found corrupt and needs to be repaired. It's asking to run a recovery. Is this going to erase everything??Â
My storage says it's using 434GB of other. Whatever other is.....did I get a virus?
Info:
MacBook
Pro, iOS 5.1.1, Storage/Repair/Disk Utility
View 2 Replies
View Related
Dec 3, 2009
well while attempting to replace my hard drive I like many other people I completely stripped out the two screws on the hard drive bracket on my 15" PowerBook G4. They are very small screws, and I thought I had the correct size philips but apparently not. I tried to cut a slot in one of them with a Dremel but that only destroyed the entire head of the screw and sent bits of shavings everywhere. What can I do to get these screws out? Should I drill them out? I just can't think of any other way to get them out when one's stripped and one is worse than stripped. Is it possible to get replacements?
View 4 Replies
View Related
Apr 2, 2012
I have a Mac mini from late 2010 that I am going to try to sell on eBay. Wondering what the most effective way to wipe all the data on it would be. I still have the disks that came with it but I'm wondering if there's something I should do to the hard drive before I use them to restore to factory defaults.
View 1 Replies
View Related
Nov 12, 2009
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies
View Related
Oct 14, 2009
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
View 9 Replies
View Related
Mar 31, 2012
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies
View Related
Feb 22, 2010
Is it possible to have an external HDD connected to an iMac or Mac Mini on a regular basis? I have a Power Mac G4, and it's always had issues with going into sleep mode when there is any external storage connected via the USB 2.0 ports (and I've put in replacement ports to try and remedy this, to no avail). The main problem is that once the system wakes up, it thinks you've improperly removed the device. Apple told me, way back, that this was normal and to just eject all external storage before going into sleep mode. Which is a pain, but looking at a new desktop Mac I would like to just get the tiny, base HDD and use a beefy external for all my media - unless this is still an acceptable norm with new macs.
View 1 Replies
View Related
Jun 25, 2012
Is it possible to manually put an external hard disk to sleep? Right now, I've already got "Put the hard disks to sleep when possible" checkmarked in the Energy Saver preference pane, and so they should sleep after 10 minutes of inactivity, but I'm wondering if it's also possible to do this manually whenever I want.Â
I just bought an external hard drive and it's already spinning constantly, compared to my current external which is completely quiet, so I'm wondering if I can put it to sleep when I need to to stop it from spinning all the time.
Info:
iMac, Mac OS X (10.7.4), 3.2 GHz Intel Core i3, 16 GB RAM
View 7 Replies
View Related
Mar 1, 2012
I've had a lot of problems with my iMac G5 power supply and since I have newer computers I've decided to get rid of this computer.Â
I want to save the hard drive and put it in a case, then use it as an external drive on my other Macs.Â
What sort of case do I need to shop for? Should I look for SATA or what exactly is the proper nomenclature.Â
Is USB 2 the preferred choice, or Firewire, or what? Is there a USB 3? I use a mid-2010 27 inch iMac with the intel processor, and I needed to buy an adapter to use my older Firewire external drive. Is Firewire a dodo?Â
View 3 Replies
View Related
Apr 12, 2012
I need to back up hard drive to an external hard drive. How can I do this automactically?Â
Powermac g5
10.4.11
tiger
Info:
Mac OS X (10.4.11)
View 1 Replies
View Related
Aug 9, 2006
i have a power mac g-5 quad with an external dvd drive and a external hard drive and 2gb of ram. on my ext. hard drive i downloaded mac the ripper and that is where i put all my dvds, now today on my pmac i was using mac the ripper, popcorn, itunes, safari all at once and it froze up on me?why? could the ram be an issue? how may programs can i use at once with my pmac?
View 3 Replies
View Related
May 16, 2010
I've been able to find ways to reallocate space on my hard drive but what if i want to take windows completely off and restore my hard drive to purely OS X? Is there a way to do that also?
View 6 Replies
View Related
Feb 12, 2012
For the last few days, since carrying out a software update (dont know what update!) when I select "sleep" from the main apple menu my screen goes to sleep but my hard drive keeps running, how do I correct this so the whole thing goes to sleep?
Info:iMac, Mac OS X (10.7.3)
View 4 Replies
View Related
Jun 13, 2012
a couple of days before my wireless track pad and keyboard would have trouble connecting when computer is waken after sleep mode. Then one day my mac mini just suddenly stopped going in a physical sleep state. When I go to the apple sign and put the mac mini to sleep the screen turns black like usual but once its put to "sleep" the light indicator on the mac mini will not blink neither will I hear the hardrive slow down. whats going on. This is the standard $700 model mac mini mid 2011.
View 3 Replies
View Related
Oct 9, 2009
I have a new 17" MBP and recently it stopped going to sleep on its own. I can force it to sleep my apple menu or shutting the lid. I have tried everything I can think of... all programs closed, nothing running (to my knowledge) and in activity monitor it shows the disk activity writting every 20 seconds or so... my only conclusion is that it's not letting the HD become inactive long enough to send to sleep... can someone please help me with this?
View 1 Replies
View Related
