Basically my hard drive randomly decided not to mount. It is a 60gb USB external hard drive. I have used a different mac, a PC and both didn't mount the hard drive. On windows it can not recognize the driver to mount but on mac nothing! I even tried external power, different USB leads and a new one. Still nothing. I think it may have become corrupt.
View 5 RepliesI have a MBP with a dead hard drive that I am trying to resurrect. The MBP was working one minute then it just froze up. On reboot I got the flashing folder with question mark meaning it couldn't find the OS. I tried to access the drive remotely from target mode but it wasn't listed. I pulled the drive and hooked it up to an SATA to USB cable and tried to access from other systems but again it wasn't displayed.
View 6 Replies View Relatedi have a 1,5 tb usb 3.0 external hard drive that doesnt show up in finder or desktop, i dont know if it is the cable or why it appears and disappears. what should i do?
Info:
MacBook Pro, OS X Mavericks (10.9.2)
I put the leopard install disk into my computer and started installing it. It went fine until it asked me where to install Leapord. With all other installs (applications, games, etc...) my hard drive will show up and that's what I'll click on, but here nothing shows up except my iPod that was plugged in. As a note, it worked on my other computers, but is not working on my G5.
View 2 Replies View RelatedI just put in a 350gb hard drive into my macbook. Installed the OS and everything is working, except I'm only getting 297gb out of the 350 gb I bought?What could cause me to loose over 50 gb of HD space? and can I somehow regain those lost gb's
View 5 Replies View RelatedI know there was several posts about getting the HD back into my finder devices but I am having a big problem because I am very confused on how to use the Terminal. If someone can give me step by step instructions.
View 2 Replies View RelatedA friend brought his new 15" Macbook Pro to me after trying to install Boot Camp and Windows XP. He said that he made a second partition for Windows; however, the drive showed only one partition formatted with NTFS. I tried reinstalling mac os using the disk that came with the laptop. When it came time to choose the destination drive, none showed up. I then went to Disk Utility. The drive and the volume showed up in the left panel but I could not Erase or do anything else - all the options were grayed out. With no firewire port I am also unable to use target mode.
View 14 Replies View RelatedWhere did the other gigs go? Is it possible someone installed a hidden disk partition and this accts for the missing 3 gigs? What can I do to locate the hidden disk partition? I have formatted the drive multiple times yet the gigs remain unaccounted. How does one go about doing a hard reboot? Do I need to change the rpms of the drive and the reformat
View 8 Replies View RelatedI have a Western Digital external hard drive. I just noticed that the icon was not showing up on my desktop. This could have been the case for awhile, I don't use it that often just as storage. I have restarted, unplugged and replugged many ways. I can hear it running and the light is on. It does not show up in the system profiler, I have reset the PRAM. I have not as of yet got new cables to try as this was discovered last night. Is there anything else I can try until I get new cables? Or what does this sound like to you. Also, what are the chances that the information on my drive is gone? This is the only copy I have for some work that I do.
View 3 Replies View RelatedWe have a 320gb external hard drive formatted in FAT32 so both the macbook and our windows computer could use the drive. We copied 5 gigs of music to the hard drive to view on the Windows computer. The computer recognizes the drive and shows that 5 gigs are being used but I cant see any of the files.
View 1 Replies View RelatedI have a Toshiba 160 GB USB external HDD (no power supply required) that I use simply as a backup for some Windows programs when I am using my virtual machine. It required a double USB cable and its icon showed on both the Windows and iMAC screen until a day or so ago. It is a functioning unit when I put it on a separate PC. I have not been able to correct the problem and in viewing some of the forum items I keep seeing suggestions to view the 'System Preferences --> general' - I do not see a 'general' nor any reference in the 'apple' that refers to hard drives (external or internal).
View 3 Replies View RelatedA bit of a PITA to get the external HD to show as an AirDisk. (AEBS)
View 1 Replies View RelatedRecently I just converted my old PC's 250gb Hard drive into an external drive. In the beginning everything worked fine. Though I could only read the files from it on my mac, I was fine with that because there was so much old music and pictures that I wanted to get off of it. There happened to be one particular picture that I couldn't find searching through the HDD with my mac, so I thought maybe I would be able to find if I looked for it through a windows system.
So I then plugged the external into my Windows laptop. After failing to find the picture on the PC, I plugged the hard drive back into my mac, but for some reason it's not showing the files. The hard drive is being found, but when i click on them in the finder no files show! The drive is not erased because the capacity and amount free is still the same. And to put the icing on the cake when I plugged the drive back into my PC a message comes up that says "The request could not be performed because of an I/O device error".
i just bought an external hard drive enclosure for a new hard drive but it doesn't show up when i plug it into my macbook. the enclosure lights up with a blue status light when i plug in the USB but it never shows in disk utility and finder. leopard is installed on the external hard drive (im trying to clone my macbook's hd). i'm thinking its the enclosure but are there any steps i can take to ensure i'm doing everything correctly? the external hard drive is working, it was installed in my macbook yesterday but i took it out because time machine restoring fails also, i plugged the external into my time capsule. the blue status light turns on meaning its plugged in but i only see my time capsule in the network
View 6 Replies View Related-15" i5 mbp
- Airport extreme base station
- 1tb (mac os journled) WD Mybook (or whatever they are called)
- file sharing under airport utility is turned on
I can't see the drive either in the list of available drives in the airport utility setup, or in any side panel. I plugged the drive in via USB directly to the laptop and it recognized it fine to use for time machine...
i just got a 150gb western digital hard drive...i have a 17" G4 powerbook running leopard...when i plug it in it does not show up nor can i feel the hard drive turning...however i plugged it into my friends new imac as well as my other friends macbook and it showed up instantly?
View 4 Replies View RelatedI've just brought a new external Hard drive for my mac book pro and when I put the usb cable into the laptop nothing showed up on the desktop. I waited a few minutes but nothing happen and then I turned off the computer and did it again.
View 2 Replies View Relatedi have an external hard drive and when i plug that into the usb port, it does NOT show up as an icon on desktop.
View 5 Replies View RelatedI'm new to this forum, but need help with my external harddrives (WD Pasport 250GB). I can find it in my disk utility, but not on my desktop. I had WD send me a new drive, but now I do not know how to transfer the info from the old drive. Its not a dead drive- its obviously turned on and connected, but I can't mount it to my desktop. Any advice??
I have a iBook G4 (if that matters).
I was zeroing out the data on my 12" PowerBook before I installed Leopard and it failed. Now my hard drive isn't showing up. What should I do?
View 4 Replies View RelatedI recently deleted a boot camp partition and i did all that i was told to do.
When your on disk utility you have the hard drive type then "macintosh HD under it.
When i click the hard drive it shows i have 91 GB remaining on it
When i click macintosh HD it shows its only a 200GB hd when its a 250 and only has 69 gb free?
I have a 1TB external LaCie hard drive. Presently, it is loaded with about 300GBs of space so I should have around 650GBs left. However, it is only showing about 240GBs left. I think the problem is that I used to use this hard drive for Time Machine backups, I deleted them via the recycle bin. I checked the recycle bin, nothing there. I verified the disk, everything ok, I repaired it as well. I even erased the empty space.
View 8 Replies View RelatedMy external WD 320GB hard drive wont show up on Finder when I connect it up. Ive been having this problem ever since I pulled it out without ejecting it - I know thats bad but my macbook froze and I had no choice.
Now my external hard drive wont show up on Finder, I even tried disk utility and I was able to verify the disk & then repair it, but its like I cant use the hard drive anymore. Every time I try to add files to it or remove files my laptop freezes and I cant do anything.
Its got to the point where all I want to do now is get all my files off this external hard drive somewhow, Is there a way to get my files off this hard drive before its too late if isnt already so.
Info:
MacBook (13-inch Aluminum Late 2008)
I have a Hitachi Touro USB 3.0 1TB external hard drive that has always worked on my Macbook. Formatted in FAT so it would work on both my PC and Mac. I can't remember exactly when it stopped working, but I think I had to reset my mac once as it stopped responding and the HDD was plugged in. After that it stopped showing up in Finder, but still appears in Disk Utility. It also shows up in Storage under "About This Mac". I've tried resetting my computer, ran Apple Hardware Test, and have tested the hard drive on other computers and it works fine. Just doesn't show up in Finder on my mac!!
Info:
MacBook Pro with Retina display, OS X Mountain Lion (10.8.5), 13" Late 2012 model
I'm not sure what the culprit is because the night I downloaded the last update of 10.5.8, the circuit for this room also blew. I don't know if it interrupted the download or not, as I wasn't paying attention. However, the next morning I woke up to the gray screen and it never booted. I finally was able to boot it up and the hard drive had a name like kjkldfjkjdkljafkjadkj. I renamed the hard drive and ran disk utilities on it. It needed to be repaired, so I installed the installation CD and used disk utilities from it. It says everything is fine. However, the hard drive now does not show up under Devices when using Finder. Also, everything seems to be a lot more sluggish now.
View 2 Replies View RelatedLast week I put an extra hard drive into a powermac G4 - i didnt know if the hardrive was working or not, and I was asked to put both Harddrives in the one machine to find out if it was working. I did this and nothing happened. I changed the jumpers and still nothing happened.
the existing hardrive was being read but not the new one that I had put in, so I went to start up disk and changed the disk that I was starting up from to the other hardrive. It wouldnt boot, i took the hardrive out and tried to put the computer back to its original state and nothing happened. just a blank screen. I have tried pressing OPT and the hardrive appears but after this screen nothing happens. if I were to use the install disc, would this wipe the hard-drive at all?
So a couple of days ago it was fine and today it does not show up in finder, or utility disk
I am about to upgrade to Mavericks now
Clearly there must be a way to do this, right? Can I install off an external hard drive? Off a USB drive? Share my macbook pro's DVD drive somehow? If the hard drive on the mac mini is completely reformatted and I plug it into the USB port on the external hard drive which I partition and install the Leopard DMG would it be able to boot off of it?
View 9 Replies View RelatedRunning a 2010 MBP Core i5 2.4GHz. I had Windows 7 originally installed. Gave me wireless problems and I gave up. Erased the partition. Installed Windows XP and everything was fine.
I got a new copy of W7 Professional x64. I installed it "over" the existing XP, though it erased the partition anyways (I don't care about that).The new 7 install has been giving me the same wireless problems. I downloaded and installed the Broadcom driver. Gave me a BSOD and restarted the computer. Now I have a BSOD on start up, too. On the OSX side of things, it no longer shows any Boot Camp hard drive. It doesn't recognize it at all. Though when I hold the option key on boot, it still shows the Windows install.
1. How do I fix the BSOD problem? (All caused by installing the driver)
2. Where the heck is the Boot Camp hard drive/partition?
yo I'm on leopard. I enabled view item info so it looks all snazzy and **** .The problem is it says 297.77 GB,,...62 GB free when i have way more free space
View 6 Replies View Related