Mac Mini :: Ethernet Does Not Route Unless WiFi Is Connected
Jun 25, 2012
I am having the darndest problems with routing on my internal network, specifically with my Mac Mini Server which originally came Snow Leopard Server and was upgraded over the top (no clean metal) wtih Lion and Lion Server (10.7.4) Router is a Cisco/Linksys E4200 with firmware 1.0.04, but have had same problems with 1.0.02 and 1.0.03.Internal LAN/WiFi is defined as 10.0.0.0/255.255.255.0. Router is 10.0.0.1 and gateway. DNS is supposed to be served by the Mac Mini on 10.0.0.7, which also hosts my DHCP server to configure others on my home network.
With WiFi off on the Mac Mini "netstat -rn" returns essentially the same thing as on my Mac Pro (10.7.4 not-server) but for the MacPro at 10.0.0.3. In this condition the Mini will ping the MacPro and I can ssh between, through the ethernet switch on the E4200. The MacPro can ping the E4200 but the Mac Mini can not. The E4200 has some ports opened to forward to the Mac Mini.But, enable WiFi on the Mac Mini and suddenly the ethernet starts working through the E4200.
Sometimes I can change the static IP address on the Mini's ethernet with WiFi off and then it starts speaking to the E4200 and internet. For instance tonight I changed it to 10.0.0.8 and it didn't work. But 10.0.0.6 did. Moved it back to 10.0.0.7 and it still didn't work trough the router but it did work internally Mini to MacPro through the enthernet switch on the E4200.
I have a iMac in my office connected to ethernet and wifi. Can I network/share files with the Macbook Pro at home I use for travel? Both have Mavericks OSX.
I just got a new MacBook and have been copying files via Ethernet from my pc. One thing I noticed is that whenever an Ethernet cable is plugged in nad hooked up to the router, the Internet stops working on both mac and pc. However, my torrent client on my pc continues downloading so it's not actually stopping, the browser is just failing to connect as is the official network status. Why is this?
So basically I live in a college dorm and have been using ethernet the whole time I've been here then out of no where my computer will not take my ethernet cord anymore. In fact it will not take any ethernet cord. I've tried my friends and no luck, they try mine and it works. So it is obviously my computer. I plug it in, and it doesn't detect it, it just says ethernet not connected. What do I do? I got the latest Macbook pro with snow leapord. I take care of it, I didn't drop or anything it just stopped working.
Hope I can get this clear before buying a new MBair 1.86 SSD. Can I connect to the MB air the ethernet / USB adapter via a USB hub? Via the USB hub of the extrenal keyboard? Via the USB hub of the new 24" led display?
After setting my Built-in Ethernet card to DHCP today, for some reason it all of a sudden got an ip adress and became green and stated that it was connected.
But i couldn't open any websites on either of my browsers (mozilla, safari) and when i used the diagnostic it said that the internet, isp and network were working but that the Internet and Server have failed.
Can anyone help me with nthis new perdicament? I read somewhere that maybe i should swap the eth0 and eth1? Make one internal while the other external? I'm not sure if this applies
I'm using a macbook and am connecting to a dormitory internet. I had to give them my Ethernet ID and they gave me a password and a login which i still am not too sure what to do with. When i use the PPPoE version my network settings/internet/server fail.
I have a G5 DP 2.0 and have been using it's built in ethernet port connected straight to my BT home hub (adsl/router) for years. Any way I add into the mix a netgear 1000Base layer 2 switch and the G5's ethernet doesn't work, reconnect straight to the router and all is fine. Now tested with new cables and tested on every port on the switch. By the way the port light on the switch don't light up when G5 attached. Now have tried the switch with a g4 and all is fine on every port and supprisingly I've stuck a PCI card in the G5 and that works as well. Just can't work out why the built in won't work through the switch but will direct.
What might be the reason for this? I had to look up my IP address and configure it manually, so I got it to display as "connected," but there is still no internet when I turn off airport.
The subject title says it really. I've connected a Harddrive via an ethernet cable to an iMac. Under Preferences, Network, it says 'connected' and provides an IP address.Â
When I open Finder, select Go and input the IP address, the response is 'This file server is available on your computer. Access the volumes and files locally', however I cant see the drive in Finder and don't know how to get it to appear.Â
We are trying to set up a system where 4 computers are connected to a set of hard drives and connected through Ethernet. We'd like a fast speed. Which systems to get? Which cable is fastest? Is it hard to set up?
I just got the new macbook, with snow leopord, and is running on 10.6.2. My internet is really slow when I connect it to my linksys router. It is a wrt54g router. And I am using a WPA2 password. The internet works fine with the three other laptops in my house. But is slow when I connect with wireless to the router. But when I connect to the router with a ethernet cable it works really fast.
im planning on getting an airport extreme + hard drive for time machine backups & file storage. would it be best to just get a usb hard drive [URL] or a hard drive w/ an ethernet port [URL]?
I'm trying to connect an AE to my PC using XP with a D-Link DIR-655 WiFi router. I've used the airport utility and connected the AE to my router via ethernet. It appears to be setup properly and I can see it on the D-Link software. After disconnecting the ethernet cable and with the AE sitting next to the router it continually shows up and then disappears. The light is green on the AE. Then I disconnected the power and moved the AE into the place where I'm going to use it.
Now it will show up on my D-Link software occasionally but the light won't turn green. It also doesn't show up on the airport utility software. I also have a Touch and ATV that both work fine on the same network and the same location. The AE is about 30 feet from the router with only one wall in between them. Am I missing something here or could there be a problem with the AE?
Just got the time capsule, going to use it for wireless time machine back ups of my laptop. I would also like to connect an external drive to the time capsule for movies and audio files that are too big for my laptop.
I notice if I connect my owc 7200 rpm external drive via the USB port to the time capsule, things are a bit sluggish when I access movie/audio files over the wireless...What if I purchased an external drive with an ethernet port? would it work if I plugged it into the time capsule? and if so would there be a speed increase?
We just bought a new iMac this afternoon. Haven't been able to connect to the internet, although the assistant says the connections are working fine. The ethernet light is green. Safari continually shows a message that says, 'your computer isn't connected to the internet."
my Internet was slow on all my machines, (macbook MP Vista Ipod) (has been fine for 5 months)after 5 hours or so they all fixed themselves expect for the MP when im talking slow 0.6kbps download speedI thought what the hell ill reinstall it should fix it. No luck, i then tried Wifi on the MP & it runs fine 2.3mbps on ubuntu downloads fine.so any ideas on why MP via Wifi is Fine MP via ethenet is very slow.
Just a warning, I bought a Mac Mini (2009) and wanted it to hook it up to my TV. My TV does not have HDMI or DVI inputs so I bought a Mini DVI to Video adapter from Apple.But I could not get it to work, then I googled for it and it seems this adapter does not work with 2009 Mac's since it does not output an analog signal anymore!
URL
So anyone that wants to hook up his new Mac to an older TV set with the Video adapter, you are warned.I guess i'll have to buy a Mini-DVI to VGA adapter and then a VGA to SVIDEO converter..
Ive got a pretty fast internet connection at home and I have just realised that when I plug my iBook and desktop pcs into my wireless router ethernet (LAN) ports I get a much faster internet connection speed compared to the wifi.I.e. 12-17mbps when through ethernet and when I connect to the wifi I get 2-4mbps. My computers are all located in the same room no more than 5 metres away from the router.
I'm sure everyone heard of Onlive which launched yesterday, one of of the downsides currently is they wont allow you to play over Wi-Fi due to latency issues. Mostly they don't want the user to experience latency issues and blame it on the service rather than the connection. (They say Wi-Fi will work eventually once they optimize it more, and currently their closed beta testers are able to use it over wireless, and even on the iPad, and iPhone). Anyway, Windows has a nifty feature where you can bridge your connections, and by doing that, Onlive will work over Wi-Fi, I tried it out and it actually worked great, very minimal latency issues, but I usually am on my OSX partition, and want to play it on here. Does anyone know of a way to fake out Onlive? Or do a bridge connections type thing within OS X?
Just got accepted into OnLive (video game service) In order to play I can't be on WiFi. Is there any way to trick my MacBook Pro, iMac into thinking it's hardwired in? Something like 3G Unrestrictor for iPhone
How do I do to configure my MBP to prefer wired ethernet (when available) over wifi without disabling Airport?In other words: avoid switching to wifi when activate Airport.
I'm wondering how would it be possible to make my MacMini (last generation) as an access point 802.11n.I have setup an internet share between Ethernet and WiFi, but the bandwith looks to be more 802.11g than 802.11n.Â
I have my imac connected to lan via ethernet. I want to use airdrop but need to have my wifi enabled. Can i use both ethernet and wifi on the same network. I want to use etehrnet connection as its a 1 gigabyte connection and router is in another room well away from my imac and therefore not interested in using wifi for my connection only for airdop.Â
i connected it to my Airport Extreme and not the USB because i want to use the scanning and faxing features. so how can i configure it? when i connected it via USB it recognized it but when i connected it to ethernet it didn't...
I was just checking if I can set the Airport express to receive my Airport Extreme's WiFi network and connect a non-WiFi device to the Airport Express ?
I have a really crappy connection at home, about 50 ~ 60 kpbs. LOL. Cheapest AT&T DSL, $19.95. I have a wireless router hooked up right now. Is it possible to utilize my WIFI and ETHERNET all at the same time to double my connection speed? If so how? I'm running 10.5.
I just bought a new imac and a 1tb time capsule. Will I get faster dl speeds with an ethernet cable plugged into the back of the imac from the time capsule or over wifi.
