Hardware :: AirPort Express Setup - Connected To Router Via Ethernet
Dec 16, 2008
I'm trying to connect an AE to my PC using XP with a D-Link DIR-655 WiFi router. I've used the airport utility and connected the AE to my router via ethernet. It appears to be setup properly and I can see it on the D-Link software. After disconnecting the ethernet cable and with the AE sitting next to the router it continually shows up and then disappears. The light is green on the AE. Then I disconnected the power and moved the AE into the place where I'm going to use it.
Now it will show up on my D-Link software occasionally but the light won't turn green. It also doesn't show up on the airport utility software. I also have a Touch and ATV that both work fine on the same network and the same location. The AE is about 30 feet from the router with only one wall in between them. Am I missing something here or could there be a problem with the AE?
View 6 Replies
ADVERTISEMENT
May 16, 2010
I have a modem (Tilgin Vood 342) that came from the phone company which I use to connect my old desktop PC and my new MacBook Pro to the internet, through two separate ethernet cables. The modem has three ethernet ports and connects to the internet through an ethernet port in the wall. I want to buy an Airport Express in order to get wireless internet to my MacBook, but since my desktop PC can't receive wireless internet, I still need it to be plugged into the modem through a cable (I don't mind that). So my question is, can I use one of the modem ports for the Airport Express and another for the ethernet cable without there being a conflict?
I'm asking because I went to an electronics store and I was told that there might be a conflict and that I should buy an Airport Extreme or another router with ports in order for it to work. I would really prefer the Express because it's and it's the most I can pay for.
View 11 Replies
View Related
Dec 11, 2010
i connected it to my Airport Extreme and not the USB because i want to use the scanning and faxing features. so how can i configure it? when i connected it via USB it recognized it but when i connected it to ethernet it didn't...
View 1 Replies
View Related
Jun 10, 2009
We are trying to set up a system where 4 computers are connected to a set of hard drives and connected through Ethernet. We'd like a fast speed. Which systems to get? Which cable is fastest? Is it hard to set up?
View 1 Replies
View Related
Apr 25, 2010
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
View 1 Replies
View Related
Aug 10, 2010
Having issues in setting up my Apple Extreme + Apple Express to my Linksys E2100L ROUTER/NETWORK. I have Green lights on my extreme and express with the Linksys router having the extreme attached to the router (ethernet) with express in another room for my Blu-ray. The Linksys does not see the Extreme or Express. I am using WPA2 Security on the Linksys router. How can I get the Linksys to see the Apple Extreme/ Express? Is there something I need to do on the Linksys end or on the Extreme/Express so that they can talk to each other?
View 4 Replies
View Related
Jul 10, 2009
My iBook G4 is having network issues. Since waking from sleep, it will connect to my Airport Extreme base station, but I can't access the web, or access the router from Airport Utility.
Things I've tried so far:
*Rebooting
*Resetting the router to factory defaults
*Swapping out the router for a Linksys
*Clearing out network passwords from Keychain
I doubt it's a hardware issue, as everything works in Tiger (booting from an external drive).
View 7 Replies
View Related
Jan 7, 2010
I am attempting to set up a wireless network with an AirPort Express in order to access the Internet from my iPod touch. My computer is a 2002 PowerBook G4/667 running OS X 10.4.11 (the latest OS it can run), and according to an Apple Store Genus, either the AirPort card or the AirPort antenna is shot, rendering the PowerBook useless as a wireless device. Adding to the pain, my cable modem has only one Ethernet port. Hence, I have purchased a Belkin F5D5050 USB/Ethernet adapter (and installed USBPegasusEthernet 1.0.9 as a kernel extension to make it work).
Which I plan to use to connect the AirPort Express to the computer (via the Ethernet port on the Express and the USB port on the PowerBook). The modem would be connected via Ethernet directly to the PowerBook's sole Ethernet port. Everything I read on the Internet says that I should be able to configure the AirPort Express over Ethernet via AirPort Admin Utility, but the utility doesn't seem to see the Express, even if I directly connect them to each other (one Ethernet port to the other). How I could make my network operational?
View 3 Replies
View Related
Feb 10, 2010
I apparently have a unique situation. My ethernet connection, if that is what it even is, comes out of the wall. No connection, nothing like that, it just goes into the wall, and disappears. They told me on the phone it's a LAN. I have my IP, Subnet, default gateway, and DNS numbers. When I plug the cord into my computer, using the IP4 thing, it works fine. I have to put the numbers in myself, no big deal.
Then I plug my APE in, and go into the utility to try to set it up. I enter all of those numbers. But run into all kinds of problems. Vista has no probs connecting my comp up to the airport, but airport has probs getting onto the net. I have fiddled around for hours trying to enter the numbers differently, but with no luck.
View 1 Replies
View Related
May 6, 2012
i am traveling to my parents and want to use my aiport to get wifi. my fathers computer is not running on wifi. what do i need to do to get my airport to work with his router
Info:
MacBook, iOS 5.0.1
View 3 Replies
View Related
Dec 1, 2010
Upon getting my iPad and being unable to stream much without huge wait times, I've decided to take the plunge and get an Airport Extreme. Well, it arrived today, but alas it seems that I need a modem and Ethernet cord! Now, in my defense, I've been using a router that is both a modem and a router for years -- and it connected straight to the cable jack, so I didn't know that most routers needed a separate modem unit and Ethernet cord! Any way, it's too late to head out now so I'm going to have to wait till tomorrow to stream my precious netflix -- but I want to get it right this time; so...
I need an ethernet cord to connect the router and modem, right? The Modem/Router I've been using is called the SBG900 Wireless Surfboard Gateway. In my experience, the speeds have been dismal, but I should be able to use this as my modem -- right? Will it be slower than if I bought a separate modem? Does the modem even effect the speed of your internet or is that just the router?
View 6 Replies
View Related
Nov 18, 2010
I have a D-Link Extreme router, and the WiFi has issues with my MacBook and such every so often and it drives me absolutely crazy. But I have 2 wired computers and a Xbox 360 that never have a problem plugged into the router via ethernet. I was wondering if I bought a Airport Express and plugged it into the 4th port of my router rather then into modem would it have enough juice to transfer the WiFi? I don't want to spend the extra money on a more expensive router for some plugs and WiFi if I can still use my router for wired and send a wire to the Airport for wireless. Yet I don't want to spend the money on the Airport Express if it can't be used like that like some other routers can.
View 2 Replies
View Related
Jun 5, 2006
I have a PC (running XP Pro) that accesses the internet through a wired router (D-Link) hooked to a cable modem. My boyfriend just moved in with his iBook and Airport Express. I hooked the Airport Express to a LAN port on the wired router, and it basically works fine. He is able to access the internet wirelessly without any trouble. I also connected the printer to Airport Express and he is able to print wirelessly. However, I thought I was going to be able to also print to the printer because following info from Airport FAQ.
FROM AIRPORT EXPRESS FAQ:
Question: AirPort Express connects via wire to my third-party router, and I have plugged a compatible USB printer into AirPort Express. Will it share the printer with my non-Apple computers, too?
Answer: AirPort Express acts as a print server for any Mac OS X 10.2 or later, Windows 2000, or Windows XP computer that is on the same subnet, regardless of whether the third-party router is wired or wireless.
Can anyone comment on this? How can I make this feature work from my wired computer? Is there something I need to do to make them on the same subnet? Also, if there IS a way to print via Airport Express, is there a way for me to access airTunes too?
I did read a somewhat similar situation and this is what was advised. "Manually give it an IP address and subnet in airport admin (under the internet tab). For example if your router IP address is 192.168.x.1 with a subnet of 255.255.255.0 give your Airport Express 192.168.x.2 255.255.255.0. i.e. give your Airport Express 1 IP number higher than your router. Also make sure you are not distrupting IP address from your Airport Express, and you are creating a wifi not joining."
View 7 Replies
View Related
Jul 20, 2009
I feel really dumb asking it, having been "into" computers for over half my life; However I digress. Will an aiport express work with my router that came with the internet service I have? Or will it only work with an airport extreme base station?
View 8 Replies
View Related
Feb 19, 2010
I'm sure this has been asked upwards of a million times around here, and I've read a few of them. What I'm looking for is updated information. I was all set to buy a Linksys WRT54G as suggested by Arstechnica in 2004. However reading the first reviewer here suggests that Linksys has changed their internal firmware, and that I may not be able to use it anymore. All that has put me back at square one. Since this is a hack, different versions of each router may or may not work. I really want to know what currently sold routers people have managed to work with their Airport express.
Network information, current:...............
View 6 Replies
View Related
Sep 1, 2010
I was just checking if I can set the Airport express to receive my Airport Extreme's WiFi network and connect a non-WiFi device to the Airport Express ?
View 2 Replies
View Related
Mar 29, 2008
I have a problem with my Airport Express. I plug it in to the plug and connect the ethernet. When i go to search for the base station on Airport Utility it doesn't show it and it tells me to rescan to see if I can find it but it never does. Any ideas on how to fix ?
View 11 Replies
View Related
Sep 28, 2008
Basically I have a linux machine and I cant get the internet sharing to work either they ping each other however won't let it access the internet so thats a different story but; my dad claimed I could use the airport express as a wireless-to-Ethernet bridge, it's connected to the wireless network however how do I get it to transmit the connection through the Ethernet cable?
View 8 Replies
View Related
Apr 17, 2009
When i try to extend my network with my Airport Express it creates another wireless network, wich is not what i want.
I have a Leve1 router as my main, connected to my modem.
My airport express is connected to the network with a CAT5 ethernet cable.
I use the setup in Aiport Utility and choose:
I Want Airport Express to join my current network ->
I want to connect AirPort Express to my network using Ethernet to extend my current netork or create a second network ->
I choose my network on the list and click continue ->
I want to connect AirPort Express to my network using Ethernet to extend my existing wireless network ->
And then it doenst join my network, but creates a new called Apple Network 00a133..
View 6 Replies
View Related
Aug 26, 2009
I live in a district where phone lines don't reach, therefore I don't have wire internet: only a 3G modem. Can I use AirPort without a cable? Or could I plug in the USB 3G modem into it instead?
View 2 Replies
View Related
Nov 28, 2009
i know that it is possible to connect a HD to the AE by the usb port but now that manufacturers are offering more and more external HD with ethernet is it possible to connect them to the Airport Express or do i really have to spend more to get the Extreme?
View 9 Replies
View Related
Mar 26, 2010
I'm planning to buy an AirPort Express. But I have a question. Can I stream my music wireless from iTunes on my Macbook, without connecting the AirPort Express to an Ethernet cable?
View 3 Replies
View Related
Jan 31, 2009
I have a Intel iMAC 2.4GHz. I know it has build in Airport Extreme. I also have a Airport Express 802.11n. I am having some difficulty making it do what I want. I am wondering if it is even possible.
This is my setup:
DSL modem -> iMAC in office connected via ethernet.
Airport Express -> Airtunes, USB printer, Dish Network DVR connected to Ethernet in living room.
My question is can I share my DSL connection from my iMAC to the Airport Express then to my DVR (wired) and even my Wii (wireless)?
View 3 Replies
View Related
Dec 10, 2009
I have a WiFi network setup with two Airport Expresses. One is "n" and one is "b/g". After a day or so I notice that the wifi speed degrades significantly. I'm not sure what settings to play around with. Could it be the channel? In general, is there a better channel to select?
View 5 Replies
View Related
Oct 17, 2010
I've moved out to the middle of nowhere, and there's no phone line. However i do have a very fast 3G/HSDPA wireless router on the 'Three' network, and have been impressed by its speed - i was downloading at 285kb/sec just now! Only issue is that there's a 15gb/month limit on data, but it's the most i could get.
Anyway, it's not a USB dongle, it's actually a tiny wireless router and more than 1 person can be connected with no problems. It's a Huawei E585 Wireless Modem.Thing is, I still want to use my Airport Express (802.11n) to stream from different machines to my hifi.How should i go about this? If i connect the Airport Express to the 'Three' router (which is b/g speed) and use that normally, would it work properly do you think? Does anyone have a set up like this, or has tried it
I don't have my Airport Express with me as it's with a friend, so can't just go and try it myself. Obviously don't want to have to put a computer onto a different network to be able to use 'Airtunes'.
View 6 Replies
View Related
Nov 11, 2010
Not sure if this is possible, I'm sure there's someone out there who would be able to tell me either way. I've got a D Link router thats plugged into my 50mb in my lounge. I'd like to put my airport express in my kitchen and pair them so its the same network. The reason for this is that I have my HIFI in the kitchen which will be plugged into my airport so I can use it as remote speakers for my itunes while I'm still connected to the 50mb and D Link. Is this possible?
View 2 Replies
View Related
Mar 12, 2009
I live in a small apartment, so I never set up a wireless network, because, well I don't need to. However, lately I've been interested in trying some things out with my iphone to see how they work (the remote application mainly), but don't really have the money or need to go out and buy a wireless router. I was curious if there was any way to use my Airport Express Station as a wireless router? Someone told me it was possible, but after much googling, I didn't find much.
View 5 Replies
View Related
Nov 8, 2010
I recently found out that the Ethernet ports on the Airport Express Units are 100 MBits only. With a Time Capsule I am able to get 15-18 MB / sec via the WiFi, but the Airport Express, even though it has the same Air-capabilities, is limited to around 11 MB / sec through its Ethernet port. I hope they will get upgraded with Gigabit soon, I will replace all in my household. Is there any info on when it might happen?
View 4 Replies
View Related
Dec 17, 2010
Can the ethernet port on the the airport express be used to plug in a non wifi piece of equipment. Example I have a wireless router: WiFi to airport express (via ethernet connector) to xbox360.
View 3 Replies
View Related
Jan 18, 2009
The Apple site is quite vague on this point but I thought I'd clarify before buying one. I have a Time Capsule as my main router, but I want to move it, but when I do it's out of range of one of my computers. Can I plug the Express in near the computer, and then Ethernet it up to the computer, or is that Ethernet port meant to go into the TC?
View 3 Replies
View Related
