I just got a new MacBook and have been copying files via Ethernet from my pc. One thing I noticed is that whenever an Ethernet cable is plugged in nad hooked up to the router, the Internet stops working on both mac and pc. However, my torrent client on my pc continues downloading so it's not actually stopping, the browser is just failing to connect as is the official network status. Why is this?
View 1 RepliesI use a 4G Galaxy Nexus to broadcast a private WPA2 network. The 4G signal is always strong, and I've verified that the internet is active on the broadcasting device, and that other non-Apple devices maintain a solid connection. However my macbook pro does not lose the network connection, the internet stops working only on the macbook pro and I must "turn Wifi Off" and back on using the top right menu icon in order for the internet connection to resume working on the laptop. It will stop working every 5-10 minutes.
Info:
Mac OS X (10.7.3)
I just got the new macbook, with snow leopord, and is running on 10.6.2. My internet is really slow when I connect it to my linksys router. It is a wrt54g router. And I am using a WPA2 password. The internet works fine with the three other laptops in my house. But is slow when I connect with wireless to the router. But when I connect to the router with a ethernet cable it works really fast.
View 8 Replies View RelatedI have a MPB early 2011 and I have talktalk internet. I have absolutely no problems with my wifi up until the last week. I can use the internet perfectly fine downstairs when I am in the living room (where the router is located) as I am typing this using it, however when I go upstairs i.e. to the bedroom directly above where the router is situated I am still connected to the internet at the wifi symbol is black however i lose internet connection and I am not able to use the internet at all. This is a new issue as before, I was able to use my MPB anywhere in the house without any problems. Â
I don't believe it's the router as my iPhone connects fine upstairs and we also have a MPB late 2013 and that works perfectly fine upstairs. Â
Info:
MacBook Pro (13-inch Early 2011), OS X Mavericks (10.9.4)
I just bought a new imac and a 1tb time capsule. Will I get faster dl speeds with an ethernet cable plugged into the back of the imac from the time capsule or over wifi.
View 11 Replies View RelatedWhen you get home at your desk, put your MBP on the table plugging it to an external monitor or not, do you keep it running on WiFi or do you plug in an ethernet cable for your notebook? I am on a 25mbps line in my home and i find that when i plug in the cable my internet connection is more stable, faster and doesn't drop out sometimes. Because, sometimes on Wifi, websites take a little longer to load or it seems to not load at all. While on the ethernet cable everything is just speed of light instant.
I have also noticed that using vmware when i go away from the computer and puts windows to sleep, when i get back, it takes a while for windows to recognize the airport vmware driver and connect back to internet, while with the ethernet cable it is just instant (again). Noticed this while running windows live messenger and the time it takes to connect back. I also noticed that transferring files from my windows vista desktop computer to my macbook was alot faster on ethernet cable than on the wifi connection, even though my router supports 54mbps wifi. So are you guys satisfied with your wifi? Or do you use an ethernet cable for stability? Or am i the only one with minor wifi problems?
2010 i7 15'' MBP. I've been connected to the internet wireless with my Airport Extreme from day 1, but today I wanted to give the ethernet port a try and it just didn't work. The ethernet cable is recognized, but it says there is no IP. I do not know my IP settings or any of that. What do I do?
View 2 Replies View RelatedI know the steps for internet sharing airport card's internet access to another computer via ethernet cable, but how do i set it up to share it with a router via ethernet cable?
View 1 Replies View RelatedI am having the darndest problems with routing on my internal network, specifically with my Mac Mini Server which originally came Snow Leopard Server and was upgraded over the top (no clean metal) wtih Lion and Lion Server (10.7.4) Router is a Cisco/Linksys E4200 with firmware 1.0.04, but have had same problems with 1.0.02 and 1.0.03.Internal LAN/WiFi is defined as 10.0.0.0/255.255.255.0. Router is 10.0.0.1 and gateway. DNS is supposed to be served by the Mac Mini on 10.0.0.7, which also hosts my DHCP server to configure others on my home network.
With WiFi off on the Mac Mini "netstat -rn" returns essentially the same thing as on my Mac Pro (10.7.4 not-server) but for the MacPro at 10.0.0.3. In this condition the Mini will ping the MacPro and I can ssh between, through the ethernet switch on the E4200. The MacPro can ping the E4200 but the Mac Mini can not. The E4200 has some ports opened to forward to the Mac Mini.But, enable WiFi on the Mac Mini and suddenly the ethernet starts working through the E4200.
Sometimes I can change the static IP address on the Mini's ethernet with WiFi off and then it starts speaking to the E4200 and internet. For instance tonight I changed it to 10.0.0.8 and it didn't work. But 10.0.0.6 did. Moved it back to 10.0.0.7 and it still didn't work trough the router but it did work internally Mini to MacPro through the enthernet switch on the E4200.
[code]...
Info:Mac mini, Mac OS X (10.7.4), Server
I'm here at university and the wifi here sucks! it is so slow, it is working.However there is an ethernet port and I did connect to it this morning. But, this evening I tried connecting again and it wouldnt let me!At my university they require you to put in your student ID and pw in order for you to use the internet for both wi-fi and ethernet. But when i tried this evening it dint ask for my student ID or password. I went to settings and it did say that there was a connection and that "Ethernet has a self-assigned IP address and will not be able to connect to the Internet"
i dont understand how come now it isnt working. I aksed my classmate nextdoor if his internet port was working through the ethernet port he said it was.... i am not that tech savy so keep vocabulary to something simple lmaooo.
After upgraded to maverick, I can't get internet via ethernet cable. The wireless is still working fine.Â
Info:
iMac (24-inch Early 2009), OS X Mavericks (10.9.3)
I have a iMac in my office connected to ethernet and wifi. Can I network/share files with the Macbook Pro at home I use for travel? Both have Mavericks OSX.
Info:
MacBook Pro, Mac OS X (10.6.8)
I connect to the internet mainly through an ethernet cable, connected to my own base for ethernet connections (Might be a router, but doesn't connect directly to the internet) which is connected to the main Linksys router on the other side of my house, which even has a wireless connection.
Regardless, this setup has worked without issue for a long time now, but all of a sudden now, I cannot connect to the internet (On my Mac).
I have tried unplugging the routers, for extended periods of time, plugging them back in, but I cannot connect to the internet. Whats awkward, is that when I check the Network settings in the System Preferences, it says clearly is that the Ethernet Cable is connected (Which it is), and as a backup, I have even connected to my Wireless Network through AirPort (Which says it is connected), but I cannot connect to the internet through Firefox, or any instant messaging service.
On the main computer, with the main router, the internet works fine. When I try to load Firefox on my Mac, it sometimes takes a long time loading (On a blank screen), and never loads usually (With occasional loads, but usually does not connect).
I was wondering if anyone knows if its possible to share my LAN internet to an XBOX 360 using the Apple USB ethernet cable (for the Macbook Air) on my Macbook Pro 13"? I've tried several routers, and all have them have failed me giving me massive timeouts and sudden disconnects. I think this should be a good solution.
View 2 Replies View RelatedMy father in law had a power failure at the house, and since then, he cannot connect to the internet via DSL Modem connected via ethernet cable. Being that he is 1000 miles away, I am trying to diagnose via phone. System Info: Imac 17", purchased new around 2006- Intel chip, running Tiger OS
Symptoms:
- Cannot connect via ethernet
- When searching system profiler, "Built-in Ethernet" shows up, but no MAC address
- In Network settings, he can see the various connection ports, but cannot check the box on "Built-in Ethernet" to turn the port on... won't let him.
- Wireless is not an option, I don't want to be 24/7 tech support
Diagnosis? I am thinking that the power surge may have fried the ethernet port on the motherboard.
Repair Solution: Planning on picking up the Apple USB Ethernet adapter. I know it doesn't have the correct drivers to run on Tiger, but found a driver online that claims it allows use of the usb adapter on Panther on up.
Questions - Does this sound like a fried ethernet port? Any other easy diagnostic tests I can do? Does the USB adapter sounds like a decent solution?
the xp laptop cannot access the wireless internet and the router is too far away to use.Therefore i'm wanting to share my mac's internet with the xp laptop via an ethernet cable.I've searched for hours and I cannot find the correct way to do this.
View 4 Replies View RelatedI have a MacMini (about 3 years old, running OS 10.6.8).
Ever since I got it I have connected it to the internet via WIFI (using an Airport Express connected to a switch - connected to a router). No problems.
But now I have pulled a cable to my office and want it connected via ethernet.
But as soon as I plug in the ethernet cable I loose my internet connection. The DSL light on my router (Zyxel Prestige) flashes a bit and turns off.
So there is no internet connection.
But the network works (i can connect my XBox to the MacMini - which are both connected to the switch)I have tried removing everything (Switch, Xbox and Airport) so it's just the the router with my MacMini connected to it. Still looses internet. The routers DSL light goes out, and I have no internet connection.Â
Info:
Mac mini, Mac OS X (10.6.8)
I seem to have a problem with my ethernet port not working after a specific location change...I have three locations I used frequently. Let's call them:Â
1) HomeWireless
2) WorkWireless (used when I'm in meetings)
3) WorkEthernet (used when I'm at my desk)Â
My general practice is to change locations just before putting my MacBook Pro to sleep, and then it is happily ready for the desired network when it is awoken.I'm not sure what this change in behavior coincided with, but as of ~1 month ago, I am finding that going from WorkWireless to WorkEthernet, my ethernet port appears to be completely dead and I have to reboot the computer to reactivate it (yes, I've checked the cable itself and the wall port at they're OK). I've tried a couple ways of disabling & re-enabling it in software, but I don't get the impression anything actually resets this interface - suggestions are welcome as perhaps I just didn't try the right thing. I couldn't find anything quite the same as "networksetup -setairportpower" for the ethernet port.Oddly, this is not an issue with going from HomeWireless to WorkEthernet. Both HomeWirelss and WorkWireless have the ethernet interface deactivated in the Network pref pane, and perhaps the only notable difference between HomeWirelss and WorkWireless is that I use a static IP on the former and dynamic on the latter.
Info:
MacBook
Pro, Mac OS X (10.6.8)
I just got a new MacBook Pro, but my wife uses my old 1.25GHz Alum. PowerBook. My MB pro flies, but unfortunately, the wireless ethernet on my old PB is slow as hell. I've got 11+GB of free space left on my hard drive and Safari or Firefox are the only applications I have open. I also have a cable internet connection with wireless through my 1st Gen Airport Express, yet it's still slow.
View 4 Replies View Relatedi can't connect to the internet via my ethernet cable, but this is a weird case. What's weird about it is that all my settings are O.K. (appletalk on and set to ethernet, tcp/ip set to ethernet, dhcp) and my iMac is recieving a 192 address, but it still can't connect to the internet. The dhcp settings are correct, because they are the same settings used on all my other devices (at least those that use internet anyway), and they all connect to the internet just fine. Whether via an ethernet cable, or Wi-Fi.
Info:
iMac, Mac OS 9.2.x
What might be the reason for this? I had to look up my IP address and configure it manually, so I got it to display as "connected," but there is still no internet when I turn off airport.
View 4 Replies View RelatedMoved thread to the help forum
(URL)
We just bought a new iMac this afternoon. Haven't been able to connect to the internet, although the assistant says the connections are working fine. The ethernet light is green. Safari continually shows a message that says, 'your computer isn't connected to the internet."
Info:
iMac, Mac OS X (10.7.2)
Ive got a pretty fast internet connection at home and I have just realised that when I plug my iBook and desktop pcs into my wireless router ethernet (LAN) ports I get a much faster internet connection speed compared to the wifi.I.e. 12-17mbps when through ethernet and when I connect to the wifi I get 2-4mbps. My computers are all located in the same room no more than 5 metres away from the router.
View 4 Replies View RelatedEvery 5 minutes the Wi-Fi stops working and I have to turn Airport on and off and I can't download any updates for apps.
Info:
iMac, Mac OS X (10.6.8), its a white iMac
I've been trying to connect over internet sharing from my Macbook pro to my i-pad 2 and am having some issues I hope someone can adress. I go to Settings>Sharing from ethernet then to wifi. I name the network choose a channel then add a password from there I get this error message.Â
Are you sure you want to turn on Internet sharing? Â
If your computer is connected to a network, turning on Internet sharing may affect the network settings of other computers and disrupt the network. Contact your system administrator before turning on Internet sharing.Â
Info:
MacBook Pro
I usually use an ethernet cable to connect to the internet. I recently bought a time capsule and in trying to set it up i plugged the capsule into the ethernet jack and my ethernet cable stopped working. I connected my computer into the capsule and its not the cable thats broken. I'm currently lost on what to try next, when i connect my computer to the jack, it says "nothing is plugged in" or something like that.
View 1 Replies View RelatedMy Macbook Pro was working fine when suddenly Safari froze, so I forced quit. After opening Safari again, the page just stayed white and wouldn't load. None of my other programs requiring internet are working either (ie. AIM, Skype), even though my internet connection is listed as connected and other devices using Wifi are working perfectly. Could this be some sort of virus?
Info:
MacBook Pro, Mac OS X (10.7.1)
I stupidly downloaded and used ccleaner from the appetite and since using it my MacBook will let me use the internet even though wifi appears connected. I plugged in a cable from the router yet still no internet.
View 1 Replies View RelatedThis happened once before and I did something in system preferences -> network, and got the connection. I did not change anything since but It is not working now and I dont remember what I did to fix it last time.Â
Info:
MacBook Air, Mac OS X (10.5.8)
