We just bought a new iMac this afternoon. Haven't been able to connect to the internet, although the assistant says the connections are working fine. The ethernet light is green. Safari continually shows a message that says, 'your computer isn't connected to the internet."
Info:
iMac, Mac OS X (10.7.2)
I have a networking question.
So I bought an AirPort Extreme Wireless-N and hooked it up to my cable modem and used the AirPort Utility to set up the base station to use DHCP.
It asks for stuff like DNS information and IP addresses in the wizard but I leave them blank hoping that the process is just going to be plug and play.
However, at the end of the wizard I was left with an amber light and a message saying that my internet connection was not working.
So then I go and plug my MBP directly to the cable modem via ethernet to try find my IP information. The modem works, so this rules out any problem of the modem to have internet connectivity.
It also gives me a bunch of IP address information:
So then I go back into the AirPort Utility and this time opt for a manual set up. I put in IP Address, Subnet Mask, Router, and DNS information into where it tells me to and let the wizard do its thing.
Afterward it says that the entire thing works perfectly. So I'm feelin' great about this except for the fact that I can't access the internet.. The light on the unit itself is SOLID GREEN, but there is no connectivity.
I am pretty much at a loss as to what to do.
Have been using this device (500GB, Late 2008) for awhile with no issues.
This week, it has been dropping my internet connection at least once per day. This is both wireless and LAN. The green light stays on. To bring it back up, all I do is unplug and it resets, so I don't think it is the DSL modem.
What might be the reason for this? I had to look up my IP address and configure it manually, so I got it to display as "connected," but there is still no internet when I turn off airport.
View 4 Replies View RelatedMoved thread to the help forum
(URL)
I just got the new macbook, with snow leopord, and is running on 10.6.2. My internet is really slow when I connect it to my linksys router. It is a wrt54g router. And I am using a WPA2 password. The internet works fine with the three other laptops in my house. But is slow when I connect with wireless to the router. But when I connect to the router with a ethernet cable it works really fast.
View 8 Replies View RelatedI just got a new MacBook and have been copying files via Ethernet from my pc. One thing I noticed is that whenever an Ethernet cable is plugged in nad hooked up to the router, the Internet stops working on both mac and pc. However, my torrent client on my pc continues downloading so it's not actually stopping, the browser is just failing to connect as is the official network status. Why is this?
View 1 Replies View RelatedI did not use any program that would activate the camera, but the green light does not turn off. I tried restarted the computer and it is still on. I tried opening Photo Booth, and it said the camera is already in use by another application, but no other application is open.
View 4 Replies View RelatedFor days my green camera light has been on, despite closing ichat, blocking websites from using the camera in system preferences, and restarting.
Info:
MacBook, Mac OS X (10.7.3)
I have a iMac in my office connected to ethernet and wifi. Can I network/share files with the Macbook Pro at home I use for travel? Both have Mavericks OSX.
Info:
MacBook Pro, Mac OS X (10.6.8)
The subject title says it really. I've connected a Harddrive via an ethernet cable to an iMac. Under Preferences, Network, it says 'connected' and provides an IP address.
When I open Finder, select Go and input the IP address, the response is 'This file server is available on your computer. Access the volumes and files locally', however I cant see the drive in Finder and don't know how to get it to appear.
Info:
iMac, Mac OS X (10.7.4)
After upgraded to maverick, I can't get internet via ethernet cable. The wireless is still working fine.
Info:
iMac (24-inch Early 2009), OS X Mavericks (10.9.3)
I have a 24" iMac that has completely all of a sudden stopped wanting to connect to the internet. However, my Macbook, connected to the same ethernet cord or wireless network, works flawlessly and has no trouble. The iMac will find the wireless network...show full bars...then drop a bar....then another bar, then another, until only the smallest bar is available. It will transfer data but only for a few seconds until it wont work at all. Now the macbook, sitting right next to the imac will show full bars and stay that way. So i tried a ethernet cable to the iMac and it will not even pull up 1 single page, but the same cable connected to my Macbook will work flawlessly.
View 3 Replies View RelatedMy father in law had a power failure at the house, and since then, he cannot connect to the internet via DSL Modem connected via ethernet cable. Being that he is 1000 miles away, I am trying to diagnose via phone. System Info: Imac 17", purchased new around 2006- Intel chip, running Tiger OS
Symptoms:
- Cannot connect via ethernet
- When searching system profiler, "Built-in Ethernet" shows up, but no MAC address
- In Network settings, he can see the various connection ports, but cannot check the box on "Built-in Ethernet" to turn the port on... won't let him.
- Wireless is not an option, I don't want to be 24/7 tech support
Diagnosis? I am thinking that the power surge may have fried the ethernet port on the motherboard.
Repair Solution: Planning on picking up the Apple USB Ethernet adapter. I know it doesn't have the correct drivers to run on Tiger, but found a driver online that claims it allows use of the usb adapter on Panther on up.
Questions - Does this sound like a fried ethernet port? Any other easy diagnostic tests I can do? Does the USB adapter sounds like a decent solution?
I know we get this alot but My comcast internet is not working this morning and after a call to them i got my Windows partition to work but not the mac partition.
I basically need to reset my IP adress but idk how.
i can't connect to the internet via my ethernet cable, but this is a weird case. What's weird about it is that all my settings are O.K. (appletalk on and set to ethernet, tcp/ip set to ethernet, dhcp) and my iMac is recieving a 192 address, but it still can't connect to the internet. The dhcp settings are correct, because they are the same settings used on all my other devices (at least those that use internet anyway), and they all connect to the internet just fine. Whether via an ethernet cable, or Wi-Fi.
Info:
iMac, Mac OS 9.2.x
I know this has been a wifi issue for many, but this is occurring with ethernet as well on our iMac 2.93. Only began with Lion update. All other 5 Macs (Snow Lep/Lep/Tiger) and several PC's on network have no problem. Have set iMac's internet connections to static/manual ip. Worked for a few days, then back to dropping. This is obviously an OS issue.
View 1 Replies View RelatedNow, the internet connection to my macbook pro stops working. The MBP is 4GB memory with intel core i7, with OS X Lion 10.7.4.
It shows that the ethernet is active. But it can not connect to the internet.
I tried to unplug/plug the ethernet cable; and renewed DHCP lease;use the same ethernet cable for another computer and it works for the other pc.
But for my MBP, it still does not work.
Info:
MacBook Pro, Mac OS X (10.7.3)
I have recently had to stop using my wireless router and connect directly from my modem to the WAN port on my computer. However, I can only achieve an internet connection when I direct connect into my PowerBook G4. When I try to connect into my iMac, I get nothing.
View 2 Replies View RelatedAfter switching to a new provider and getting a new dsl modem (a fritz!box fon 7390) I tried to setup my homenetwork again. Now the weird thing is: my Mac Mini running OSX Lion Server doesn't seem to be able to connect to the internet over its ethernet port, only when using a WiFi connection...When it's connected with ethernet it can reach the dsl modem without any problems, but it can't ping/telnet or anything else through, only over WiFi... As long as I use the mini servers WiFi connection everything works fine, but that doesn't make any sense to me.I've checked the servers setting and the Fritz!box settings and I can't seem to find anything obvious. Of course I could just go on and use the WiFi connection...
ps: all the other computers can connect fine using either wifi or regular lan connection... I even tried the exact same cable with another laptop just to make sure...
Info:
various
I am on a Mac Mini connected to the Net via a FON wireless router and Ethernet directly to my broadband modem. I have had problems with both the modem and an Airport Extreme, which eventually died, but I am back up again with the modem via the FON router.The odd thing is that I can't get Ethernet to work over a direct connection to the modem. Diagnostics tells me that the ISP and Internet fails. I can connect to the modem over Ethernet, however, change its settings etc. in my browser. There are solutions mentioned here involving changing the etc/authorization file, but wouldn't that also affect the WiFi if that was the problem?
In short, Ethernet connection to modem works. WiFi connection to FON router and then to the ISP and Internet works. But the Ethernet configuration does't go that last bit, it only works locally. Using that route, I can't connect to the outside world. I have restarted the modem, the computer etc., but that should not be the problem as both works over WiFi, using the same settings for the modem. How do I best troubleshoot this? I am getting an AirPort Express, perhaps it will work better with the modem that the computer itself, but I doubt it.
Info:
Mac mini, Mac OS X (10.7.4), 2.3 GHz Intel Core i5
I stupidly downloaded and used ccleaner from the appetite and since using it my MacBook will let me use the internet even though wifi appears connected. I plugged in a cable from the router yet still no internet.
View 1 Replies View RelatedOur green light comes on for our camera (on our Mac 10.4.11) when we are not using it. It also comes on when photobooth and ichat are not running. Does this mean that we have a virus, someone somewhere is watching us, or what?
View 9 Replies View RelatedI bought this Late 2007 macbook off of craigslist, and it was working perfectly. But after a little water got mon my macbook and charger, I plugged it in and it had a bright green light and wouldn't charge. The Next day I plugged it in and it only had a dim green light, it wouldn't Start up without the battery, or run without it. Now all I need is the battery in it to start it up and it will run off of the charger, But it still has that dim green light. The charger is a little Damaged, Photo's In the attachments. My dog chewed on it a while back. This is my first macbook, And the dvd drive is not working, but I have managed to reinstall SL with USB, So it is not a software problem.
View 7 Replies View RelatedSo I plugged my MBP in a while ago and the LED light is green, but the Mac isn't charging and the adapter under the desk isn't hot.
View 1 Replies View Relatedmy magsafe light goes dim green, orange, or off when plugged into my macbook
it still charges it fine, an it never stops charing, just the light goes dim. if i wiggle the wire the light turns back on.
i went to the apple store, the guy didnt look at it but i explained the above, he said its normal an his does the same an come back if it stops chargin
what do you thing? should i go back or call or is it fine.
I unplugged my blackbook last night when it was fully charged so I could drain the battery. Then I moved my macbook upstairs to the router and plugged in the ethernet so I could publish my website. I then plugged in my charger so it wouldn't die with publishing but its suddenly stopped working. The outlets work with other electronic devices but not my blackbook charger. No green light or nothing. It worked just a hour or two ago.
View 4 Replies View RelatedI dont know what the dim light signifies
Info:
MacBook, Mac OS X (10.7.3)
My mac decided not to turn on. The light is green but it won't turn on.
View 1 Replies View RelatedSometimes it's on; other times its not. Also: it's on when I have Mission Control focused on a particular desktop -- or so it seems.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
