When I turn on my iMac he does not get over the 'white' apple page and keeps on running in a loop for ours. I simply do not get the computer started again. I am completly lost. Tried it for several days to restart again.
Info:
iMac, iOS 5.1
On my Max os10.5.8 use to have white background and black lettering on downloads. Starting last week my Adobe Reader downloads are opening with a black background with blue lettering bearly able to read. How do I change to white background and black lettering.
Info:iMac (20-inch Early 2008), iOS 5.0.1, may have deleted airport address?
Currently im using the Windows XP partion on my Macbook which runs fine. But the Mac OS X will not start, it will stop running at the white screen with apple logo. I have tryed to re-install it from the disc but still not luck as it still stops at the apple logo. I have run several Hardware tests and its sais that there is no problems.
View 1 Replies View RelatedWhich forum discusses issues with this combo?
Info:
iMac, Mac OS X (10.6.8), White color
Our screen is all white and fan runs continually.
Info:
iMac, iOS 5.0.1
I installed SL a few days ago and had to rebuild my Time Machine backup. It powered through all 700GB today and then it kept going. The progress bar got to the max: 700/700, then went to 700.02/700.02 ,, 700.03/700.03 ,, 700.04/ 700.04 ,, etc. Currently it's adding onto the "inprogress" file and filling up the drive with more data than I had to backup! It's done 844GB out of 700. Keep in mind, this is a totally-from scratch backup here! Do I stop it? Do I wait until it fills up the drive and "figures it out" ?
View 1 Replies View RelatedI have an iMac model identifier 9.1, with Mac OS X v10.5.8 and safari version 5.0.6. All programs are running normally (fast) except safari. When I try to load webpages it takes about 11 seconds to fully load. All other computers in my house are connected to the same internet and running fine. What do I do to make the loading faster?
Info:
iMac (24-inch Early 2009), Mac OS X (10.5.8)
I have an iMac A1225 EMC2211 that is exhibiting some weird behaviour. After about 5 minutes of using it (cold boot) it will either have a kernel panic, freeze and go into a blue (bondi blue I think) screen, or shut down. I ran an extended AHT on it and after 10 minutes it shuts down (black screen) then goes into a boot loop (screen stays black and system chimes once every 2 seconds). If the system is warm it will not boot (goes to blank grey screen). The consol reports something with the NVRAM (havent had the ability to post the log yet).
Info:
iMac, Mac OS X (10.7.3), A1225 - EMC2211
Loop, and "loop back and forth" are grayed out in Quicktime Pro running under OS 10.7.4. This is incredibly annoying. Releasing buggy software is disrespectful to the community. Appl is going seriously downhill. The problem is the 10.7.4 update to the quicktime framework. How shabby can you get, Apple?
View 4 Replies View Relatedthe screen it got stuck on was white, gray apple sign spinning circle thing
and i left it there for more then half an hour with no progress. I did a hard shut off, and waited for about an hour and tried again. This time i waited for an hour, and still no progress. what should i do?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)
I just got my IMac. I have no clue what happened it was working fine. In the morning when I turned it on it just went blank turned on to a white screen with an apple on it and nothing else is happening.
Info:
iMac
My iMac will not start up, the apple comes up and the wheel goes round but then I am left with a blank white screen.
Info:
iMac, Mac OS X (10.6.8)
i have a MacBook Pro..I had my track pad replaced recently..I am not sure if it has anything to do with my screen, however, the screen is randomly turning gray and white with lines and fading out..What does this mean
Info:
MacBook Pro, Mac OS X (10.5.8)
Mac won't boot, starts with white apple screen and spinning wheel. Also has grey loading bar which disappears after loaded then stays at white apple screen.
View 1 Replies View RelatedWhy is my Snow Leopard OSX 10.6.8 IMac screen all white when I turn it on? There is no spiral and no Apple logo and the desktop does not appear. The screen is just white. Â
Prior to this, we had a wind storm in our area with some power glitches today. After one of them, the dock items disappeared and just the wallpaper was there. The colored spinner began going around when I clicked on the mouse but nothing was happening.  I unplugged it to try to reset it, but now the screen comes up all white, there's no apple logo that appears at start up and that's it. Now what should I do?
Info:
iMac, Mac OS X (10.6.8)
It's been on for about 24 hours because I'm downloading a large file. (It's been completely on, no sleep.) I was using it a couple of minutes ago when I noticed the battery was low. I plugged it in without turning it off and went downstairs. When I came back, it appeared to be shut down. I tried pressing buttons on he keyboard/moving the mouse to see if it just went to sleep but there's no response. Even pressing the power button doesn't do anything.
when I close the lid, the sleep indicator is on. (IIRC, it's supposed to flash when it's sleeping but right now, the white light indicator is solid and only goes off when I open the lid.)
If I set my macbook pro ( Lion ) into stand by, after a few hours it's completely off. I have to push the power button to start it new. I have this problem since I've installed OSX Lion.
Info:
MacBook Pro, Mac OS X (10.7.4), I7 , 4 GB ram , 500 GB HDD
I went to turn on my Power Mac G4 this morning and only the fan would come on. No light. No computer start up sounds. No screen. Just the fan. I tried a new battery and that's not it.
View 20 Replies View RelatedMy 2010 Macbook Pro running on OS X 10.9.3 is having issues turning on. When I boot it up it makes the chime like normal and the grey screen appears with the apple logo. A couple of seconds later the screen just goes black and it shuts down.Â
View 1 Replies View RelatedI have an Early 2008 Mac Pro 3.2 GHz dual CPU (8 Cores in total) one day I started the system as usual and the system start till the Apple Gray Logo appears and then it reboots and keep doing this in (loop)
I started the Apple Hardware Diagnose and it hangs in the middle! the Apple Authorized shop/repair people told me (after the tried to fix it) it is mostly the Logic Board
Can it be the RAM or the CPUs? my mac is out of warranty and the cost to fix it is crazy! so I was thinking I can buy the parts and replace it my self.
Windows user here that just ordered a 27" QuadCore iMac. Usually on my PC at home, whenever i'm not using it I turn off the monitor but leave the computer itself running most of the time (I run a lot of torrents, VNC, etc). Is there a way to turn off only the display and keep the computer running like I normally would on the PC?
View 7 Replies View RelatedI just bought a macbook, after two month of using, it won't shut down, just a white page with a small wheel keep roling.
Info:
Mac Pro, Mac OS X (10.7.1)
So i have the mid 2007 (i think) non unibody white macbook.
Yesterday after some normal usage i noticed the battery had only 30 minutes left even though it had 94% left, also the Service battery Now message had appeared
This was odd cause even though my mac is quite old a few days before the battery was lasting a normal 4-5 hour charge.
after leaving it charging over night after trying to recalibrate the battery(i dont think it actually ran all the way down as it lasted minutes while not on battery power even though it was 99%), resetting the pram, nvram and SMC, the battery now reports 20 hours of life left, but the "Replace now" message came on.
now obviously i would be ok with 20 hours of life left, but its had 20 hours left for 30 minutes an hasnt decreased
Ive googled and searched the forums but couldnt find an answer ...
Found out that when I installed Flip 4 Mac I also installed silverlight. Uninstalled Flip 4 Mac but siverlight remains and will not uninstall. Also silverlight just comes up as a white page in my Applications folder, not its traditional logo. I have seen the posts on silverlight but is it really needed for my mac? If not how do I get it off.
View 1 Replies View RelatedHalf of the time when I go back a page in safari it shows that page I was at. Then, it goes to a white screen and I have to refresh the page do do or see anything.
Info:
MacBook Pro, iOS 5.1
When I try to open the itunes store on my mac, all it does is display a blank white page. My apple ID is displayed correctly, but I can't access any new material on the itunes store.
Info:
iMac (27-inch Late 2009), Mac OS X (10.6.8)
how can i eject a dvd that seems to be in a reading loop
View 1 Replies View RelatedHow do I loop a powerpoint slide show?
Info:iMac, Mac OS X (10.7.4)
When using white text on dark blue background in Word, how can I change the cursor from black to white so that it can be seen?
View 1 Replies View RelatedI have a 6 month old iMac (bought Dec 2011). It has 10.6.8 with all patches. It began to randomly shut down and got stuck in the reboot loop (sometimes, the problem was a reawakening after sleep, but even a simple shutdown/restart wouldnt guarantee correct behavior).Â
I did the Apple Hardware Test (it reported - no troubles found), reset the SMC, PRAM - all to no avail.Â
Finally, i reinstalled the OS from the DVD that came along with the iMac. Left it for a few hours to download the "jumbo" patch from apple site, and now it is back to behaving the same way - it is stuck in a reboot loop! I dont know if it installed the patch or not, as soon as i touched any key to wake up the iMac, it rebooted (like before). And now I gotta try the boot process like 15 times and it may boot correctly. Safe Mode boot is also not guaranteed to work. It shows the sliding bar and then back to reboot!Â
If it were a software issue, the reinstall of the OS should have fixed that? If it were a hardware issue, the AHT should have caught that? Am I stuck with a lemon? Just one of those bad pieces that are inevitable in any assembly line production?Â
Info:
iMac, Mac OS X (10.6.8)
