mid-2007 Intel-based iMac
optical drive is shot
cant install winxp on bootcamp without it
thought it'd be easier to have a separate (already windows-formatted) drive (pulled from my laptop) and choose to boot to either at startup.
Info:iMac, Mac OS X (10.5.8)
how do you replace the optical drive on a macbook?
View 1 Replies View RelatedI read this somewhere but i cant seem to find it anywhere on google.
View 4 Replies View RelatedMine is 2005 model mac mini.
Model Identifier: PowerMac10,1
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
this is an old machine, can i replace optical drive with sata hard disk 2.5'' with any size like 500GB, Internally not externally.
I was wondering if anyone had successfully installed and 2nd hard drive in their iMac?I have a 2 year old 2.8 24'' iMac and the performance just isn't cutting the mustard, it's all hard drive related and I already have a decent 1TB drive in there.I was thinking of perhaps swapping the optical drive with a second hard drive for RAID0, but not too sure if there will be space and was wondering if the optical drive is a standard SATA connector, or if there is some way I could run a SATA+power cables externally?
View 7 Replies View Relatedi am trying to load ms office 2011 on to my imac. when i insert the disc it spins a few times then ejects it without loading. i have tried loading cd's and they load ok but when i tried to load a different dvd that had loaded ok in the past it did the same thing and would not load! i have checked all of the settings and they all appear to be ok.
Info:
iMac, Mac OS X (10.6.8)
I think it started from when i updated from 10.5.8 to 10.9. I had been having trouble reading any disks at all and sat down to try and fix it, when I looked more into it i noticed a few errors that kept popping up. When I insert any disk it reads for a bit and then just ejects. When i try and look for the disk utility there is no optical drive there.
When i open CDs and DVDs "You can’t open the “CDs & DVDs” preferences pane because it is not available to you at this time. To see this preferences pane, you may need to connect a device to your computer." In system information - disk burning it says "No disc burning device was found. If the device is external, make sure it’s connected and turned on." When inserting a movie DVD and opening DVD player "A valid DVD drive could not be found [-70012]
After inserting a DVD it didn't come out. so there is a dvd stuck in there now ... got iMac 27" early 2009 with 2.66ghz 8gb ram and 10.9.4osx
I have some complex questions regarding an iMac, a Time-Machine backup, and iTunes on an iPod. I live about halfway up an extinct volcano about 12 miles north of San Jose Costa Rica. Some months ago, we had a thunderstorm and as I reached to unplug my computers lightening struck about 50 meters from my house. I had an iMac with a 3-Tb external backup drive, a PC laptop and a laser printer on the same power strip.There was a definite surge and the light brighten and then power was lost for a few minutes.When power was restored, the PC and the laser printer seemed to work fine but the iMac was cold.Is is possible that the power supply was fried and not other essential parts? Would it be worthwhile to replace the power supply? Can I, with limited experience and tools do it or need I take it to a technician? My concern is that if the hard-drive is good, there is personal information on it that I don't want to risk.Do I need to replace the hard-drive before taking it for service? How hard is that, can I do it? I have seen videos of the drive replacement on-line.If there is a saving grace with this it is that the Time-Machine backup seems fine although I have only accessed the data through Finder.I replaced the iMac with a Macbook Air with significantly less mass storage and I can't just move files to the Macbook. My problem is that I have an iTunes library of some 10,000 songs on the backup and until recently on a 160 Gb iPod which was old and it crashed.I have replaced the iPod but have not tried to restore the iTunes library to it because of my confusion about how to do that.Can anyone tell me how I might do that or give me any insight into the process?
Info:
iMac
I'd like to replace (upgrade to larger drive) the hard drive in my iMac myself.
Info:iMac (27-inch Late 2009), Mac OS X (10.6.8)
The internal optical drive (MATSHITA DVD-R UJ-846) for my Intel iMac (late 2006) stop working after listening to a music CD. I inserted another music CD and the drive will try to read the CD, but after awhile, it would eject the CD. I inserted the last music CD I listened to and it did the same thing. Then I inserted several other data cds into the drive resulting in the same problem.
Info:
iMac, Mac OS X (10.6.7), 2.16 GHz Intel Core 2 Duo
I was in the middle of ripping a series of CDs in iTunes when the drive suddenly stopped reading the CDs' contents - I have tried several CDs, including re-trying ones I had already ripped. It does not get beyond track list. Do I need a new drive or can I solve it? I have also tried using a CD cleaning disc. 3 years old iMac with Mavericks installed, no previous problems. It still reads disc title and content list and loads / ejects correctly.
Info:
iMac, Mac OS X (10.7)
How much to have Apple store replace the superdrive in an iMac?
Info:
3.06 GHz Intel Core 2 Duo, Mac OS X (10.6.8)
I'm using a 20" white intel iMac and cannot manage to remove a linux boot disc from the optical drive.At first, the only way that i managed to boot to the linux disc in the first place was from the Startup Disk menu in OSX. I could not even get to the Startup Manager ('opt' at boot) or boot straight to the disc ('C').Now i'm in a position where no matter what i do, the system boots to the linux disc. I cannot even force the startup into OSX to try to eject the disc from there. I've tried holding all of these keys/combinations at startup
View 3 Replies View RelatedSo my girlfriend boss wanted me to fix her computer. So I brought it home turned it on, and it didnt chime but it booted to the gray screen with apple logo/ slashed circle/and folder with a "?" So I made a USB Mac OS x bootable drive (FLASH) held down alt (try using a windows keyboard its fun) was able to select option and install a fresh copy. all seemed well was running really hot so I poped of the screen. HOLY MOLY! this thing is CAKED with dust, and I am not kidding it has literally piles of dust. So I ran updates, and did firmware updates. Turned it off for the night.
The next morning I went to radio shack and got Dust remove spray, opened it up made sure I was carful taking off the screen, and blew the sucker out. now its NICE and CLEAN. then i made sure I plugged everything in and turned it on. Drive spun like normal, Optical checked for a CD, and fans are also running normally. but no chime, no nothing stays as silent as normal but doesnt budge, it is like it hangs.
Info:
iMac, Mac OS X (10.7)
We have i-Mac 20" with built in i-sight Power PC, one of last ones I think before the intel. We have had a few problems before with it powering down and going to sleep. Used to hoover dust out and that seemed to fix it.
Now it won't start at all. I have tried all the PRAM and various commands to re set various things but none of these work. We had a wireless keyboard and I have just tried a wired one but I do not think either are connecting as the tab key light does not come on, which it does when I tested the wired on on my lap top.
When it died it crashed with a cd in drive. I have removed this and replaced it with the mac install disk to try and run the disk check but the optical drive is not starting at all either.
All that happens on start up is the sleep light comes on, then after a few moments fan starts to whirl. I can't hear the hard drive - have tried to rock hard drive to get it to spin but nothing.
Just wondering whether worth trying to replace optical drive or is this being controlled by hard drive - hence its not working nor hard drive. is there any way to recover data if it is the hard drive that is dead? anything else I can try and replace to fix it? could I use an external optical drive connected via USB to start?
I have tried to firewire but not joy their either!
I just bought a new Mac Pro 6-core and an OWC 120Gb SSD drive. My question is putting the SSD on optical drive bay or Hard disk drive bay, is there any difference in performance? My understanding from my old PC is never to share the SATA cable with the optical drive as it will take the transfer speed of the optical drive, because they are running in the same "channel"?Is the 2 SATA cable in the optical drive bay 2 separate distinct ports/channel?
View 6 Replies View RelatedI am wondering if anyone knows where I can get the screws that go in the side of the hard drive and the standoffs (screws) for the bottom of the optical drive for a Power Mac G5.
The hard drive needs screws so it will slide into and sit in the case properly.
I bought a Pioneer DVD drive to replace the original Sony SuperDrive. Apparently, there are different sized standoffs for Pioneer and Sony drives. With the Sony standoffs on the Pioneer drive, the tray scrapes the case when it ejects.
I did a search but couldn't find any specific info as related to the 20" (late 2006) iMac. Basically, I do a lot of audio work with Logic and DP and I'm interested in replacing my 20" iMac's optical drive with a second internal hard drive. If anyone has any experience or insight regarding this, I would greatly appreciate your input. About 6 months ago, I did a DIY replacement of my iMac's internal hard drive (upgrade to 1 tb), so I'm pretty sure I'd like to DIY an optical drive / hard drive swap - that is, if it's 1) Proven to work stably (thermally and otherwise) 2) Not going to require the iMac's fan to be running faster/louder than normal Looking at my iMac's system profiler, the DVD drive is on an ATA bus (which, as I remember it, is slower than S-ATA). What kind of transfer rates do you think one could realistically expect with a hard drive on this ATA bus? Also, would I have to be careful about new hard drive compatibility, or are S-ATA and S-ATA II backwards compatible with ATA?
View 1 Replies View RelatedMy slot leading super drive has just quit ejecting the cd inside. I tried 5 different ways to eject it but none work.
Info:
MacBook Pro (13-inch Mid 2010), iOS 7.1
I was thinking of removing my DVD Superdrive and adding a SSD drive. Will I be able to put the DVD drive in an enclosure and use it as an external drive?
View 5 Replies View RelatedI recently performed an optical drive install. Had to remove the hard drive bays (I use three hard drives - Luckily, 2 run OSX). I carefully removed all three drive bays and the empty bay. When I inserted the drives into the computer I had changed the position, swapping one OSX drive with a different one and reversing the drive bays. On restart, the computer started on the drive I had not selected for startup and I received an error message stating the other drive could not mount and it gave three options (Initialize - Ignore and Eject).
I can see the drive in Disk Utility and repair the permissions (it's also located in the System Profile).
I tried a few things I read in the community using various Terminal commands but was unsuccessful.
(Let me point out that I recently switched from a PPC G5 to MacPro and swapped the drives from PPC into MacPro and all has been fine until I removed changed their positions in the bays)
Info:
Mac Pro, Mac OS X (10.5.8)
So I have a Macbook (late 2008 model), and the optical drive essentially went bye bye. If I put a disc in, it will have trouble recognizing it and then it will eject out. Anyways, last night, I did some maintenance on OnyX and it said that my volume needs to be repaired. Even Disc Utility failed to finish and said that the "filesystem verify or repair failed."
The short of it, I need to put the Leopard disc in there and do a disc repair. However, is there a way, via firewire, where I could actually use my iMac's optical disc drive in place of the Macbook and connect via firewire, then do the disc repair? If so, what would be the specific way to do this?
I recently purchased a Mac Pro and am breaking down my old Windows Xp replacement that this is replacing. I kept the nicest of the two DVD Rewritable drives I had in it.
I want to put this as a second drive in the Mac Pro. My question, I got drive replacement information off of Apple's web site but this is an addition, not a replacement.
This information should still help me a lot but most of all, how do I set the connector in the back? Do I put it to slave/primary, or cable select?
Is there anything else I have to do such as when I boot up the Mac Pro or will it simply just recognize it?
I have the Pioneer DVR-112D in my Mac Pro Classic, and I'm a little irritated that it won't burn DL-DVDs at any higher than 2x.
I recently did a crossflash with DVRFlash to update the firmware on the drive hoping that doing so would improve DL-DVD write speeds. No dice.
SO... I am looking for a newer, better, faster optical drive.
I know it needs to be ATA to work in my antique mac pro.
Does it need to be some kind of mac specific drive? Can you give me any recommendations?
Since I have no plans to add a second Optical Drive to my Mac Pro in the Second Optical Drive bay, I was wondering if I could put an SSD in that bay using a 2.5' to 3.5" drive carriage. Is this possible? Would it work? Would I be able to use it as my boot drive? Never tried this, so not sure if it would work.
Info:
Mac Pro, Mac OS X (10.7.3), Quad-Core 2010 Model
Just bought a mid-2012 MacPro. Also purchased a Crucial 512GB SSD drive, which I intend to use for a boot drive. I know that I can install the drive in one of the four slide out drive bays. From what I can gather, it doesn't matter which bay I use, Mac will boot equally well from any of them. My question is: What about the second optical bay? Is there any advantage to putting the SSD there? (other than keeping another slot open for HDD?) Have tried to research this a bit, but the model is brand-new, not a lot of info out there..
Info:
Mac Pro (Mid 2012), Mac OS X (10.7)
Over the last half hour or so, I've heard a couple intermittent click type sounds coming from my Mac Pro, when this happens, the apps I'm accessing start beach balling for maybe 10 seconds or so and then finally go back to normal. It certainly sounds like a hard drive noise, and the fact that it causes my apps to freeze up leads me to believe it's my boot drive (I have the standard 250GB drive that came with the system as my boot drive with all my apps installed, and then I have two 1TB drives in a mirrored RAID for my home directory)
The SMART status on all 3 drives check out fine, so I don't know of a decent way to pinpoint for sure which drive it is, but I want to nip this in the bud. Does anyone have any suggestions on if I can do anything else to check? It's only happened twice so far and it's been a while since the last time it happened, but I don't want to wait until it's too late. Also, what's the best way to replace my boot drive without having to do a reinstall of the OS? I've never had to do this before on a Mac...
I read news that Samsung is already coming out with 256 GB SSD drives. I'm imagining that Apple will start putting those into the Air mid next year, and wonder what are my chances of being able to replace the 128 GB SSD drive (this is assuming I purchase an Air in the next few weeks) myself when the new ones come out? I remember there have been some threads related to swapping drives on this forum in the past, but none dedicated to those new 256 GB SSD drives, as far as I can tell.
View 3 Replies View RelatedI have a late 2008 Aluminium macbook. I was wondering about replacing the current har drive with an ssd drive. I know I should get fatser boot time etc but does anyone know what sort of extra battery life I would get by using 1.
Info:
MacBook, Mac OS X (10.6.8)
I need to replace dvd/cd drive in the PowerMac G4 (AGP). Looking to add DVD+RW/CD. Can I purchase any DVD+RW/CD drive? Most DVD+RW/CD box says Windows specs.
Info:
PowerMac G4 (AGP), Mac OS X (10.4.11)
