Major issues here please I can use all the help I can get. My MacBook Pro 13" Unibody Aluminum is booting in safe mode everytime. I restate. Someone has advised my shift key could be stuck? How the he'll could that have happened? It's only a few months old, I just upgraded hard drie. My trackpad was running funky before that. My keyboard was acting wired, only symbols showed up.
View 2 Replies
i splashed some theraflu on the right side of the keyboard approximately 3 days ago. as many had mentioned, i removed the keyboard and carefully removed any liquid residue i could find and kept my computer off for a few days. today i went to figure out the damage and everything seems to work okay in terms of the computer turning on and stuff. the keyboard is still acting up though. the left side of the keyboard works mostly okay, but if i press certain letters, the number along with random number appears. the right side of the keyboard, on the other hand, several keys don't even respond at all. from these "symptoms" do you guys think the only thing that i may have to replace is the keyboard or could these "symptoms" i've described be related to some other damage also? how much does replacing a keyboard usually cost? i'm thinking this isn't going to be covered by my warranty. lastly, i've noticed that when i do turn the computer on, it automatically starts in safe-mode.
View 2 Replies View RelatedMy iMac24" can't booting in normal mode, but booing in safe mode only.
how to boot up in normal mode. If I restart the system, it is showing the apple logo and not going to Finder.
Info:
iMac, maverics
My mac was being very, very slow so I turned it off, then as it it was booting it was taking ages so i restared in safe mode. While booting in safe mode the black bar at the bottom goes around 2/5 of the way across and then my macbook just switches off.Ive tried:fsckdisk utility repair/verifyreinstalling OS X Lion
When i tried to repair, it said i needed to erase everything and reinstall the OS. Last night when i tried to it said both drives are locked so i couldnt. And now when i just tried again, neither drivers are appearing; the box is just blank.
Let alone my livelyhood on the laptop, i have thousands and thousands pictures which if lost, would genuinley heartbreak me. I have much valuable data on my laptop and i really dont want to erase all data, because me being the gigantic fool that i am, i only have one time machine back up from about a year and a half ago.
Info:
MacBook Pro
I was getting a error code 36 on my mac so I decided to try to boot up in safe mode now my macbook pro will not stop trying to boot to safe mode. I am on snow leopard.
View 2 Replies View Relateda bit complicated. I have a 3 year old iMac, Snow Leopard 10.5.2 on the dics, but I updated it so..a pretty receent version of Snow Leopard. I had had kernel panics before- it turned out to be a bad RAM chip, replaced it and it fixed the problem.
This time, I was hoping it was the same. I got a new RAM chip, swapped them out and ID'ed the bad one. Reseated the RAM. Probelm is, when I was trying to fix the problem, I had booted in Safe Mode. Now the iMac starts up normally- the chime, the Apple- AND the Safe Mode bar.
Which progresses for about 5 seconds before another Kernel panic descends. This happens whether the keyboard is connected or not. At this point the Safe Mode at startup bugs me more than the kernel panics! Sigh.
I wonder if there's any key combo on startup I could try to at least get out of Safe Mode before Kernel panic sets in. When my laptop has a kernel panic i can usually repair with Disk repair on CD. I realize this sounds hopeless! And i need it repaired, but money is an issue.
My iMac will not boot normally only in safe mode and then all programes keep flashing.Safari and mail continuously flashing grey lines..Reset the PRAM and it worked but turned the computer off and on again and its gone back to same problem...It's an iMac 27" late 2013 3.2 ghz
Info:
iMac (27-inch, Late 2013), OS X Mavericks (10.9.4)
I have a 15" mbp with 10.6 Intel core duo, 4gb ram with a boot camp and ubuntu partition through parallels. The other day I was installing xcode from apple's website, which failed 3 times after downloading saying the package couldn't be expanded. I left my computer for a while and came back where i then had to log in again. it rejected my password numerous time (i'm positive it was correct). when i restarted my computer i got a kernal panic screen when the apple logo came up. it told me to restart the computer which i did. didn't work. i restarted with the osx cd to use the disk utility. when it checked the drive it found a bunch of errors, which i then tried to correct. it went for a couple minutes then told me they couldn't be fixed and i should try to back up my data and reinstall osx. i don't know how to back up my hard drive when i can't log into my account. i've tried to boot in target disk mode and copy some files that way, but the only disk the other computer sees is my windows partition- no mac partition.
i've also tried these, none of these have worked: restarting in safe mode resetting the ram and pram booting with different sticks of ram all result in a kernal panic.
my windows partition still works fine though (as much as i hate to say it) the only things I really care about on my computer are my files from school and my itunes library. is there any way i can get these files off my computer?
I recently purchased a sort of beat up 1.5GHz 12" PowerBook G4, top of the line, and it arrived today. It boots up normally when the apple appears, then it shows the blue screen and then the mouse turns into a spinning wheel. Also, when I move the cursor, a second cursor from the same spot stays in the top-left corner. The PowerBook will only work normally as a headless server (powers on, lid closed), unless booted in safe mode. Another issue is the screen. The seller said there were lines going up and down the screen, but it varies depending on what is displayed on the screen. If the screen is grey or in target-disk mode, they do not appear, but on the 10.5 standard desktop pic, it changes pattern. The lines can be seen here: [URL]
View 1 Replies View RelatedSoda was spilled on the side of the notebook. It was never powered on. I opened up the notebook and cleaned all the components. Now the MBP only boots into safe mode.
View 4 Replies View RelatedToday, my Macbook Pro 15" started to automatically boot up in Safe Boot / Safe Mode. So every time I boot up, I have to wait 5-10 minutes and stuff. It's not normal.
I tried: Restarting, Shutting down and booting.
Resetting PRAM, NVRAM
Verifying and repairing Hard Disk in Disk Utility (it fails). Tried in Mac OS and OS Installation Disk. etc. I got this computer 6 days ago, and there is already this problem. Is there a way without reinstalling the OS? I have Windows installed on it for gaming, but I don't see anything else that could be causing the problem.
My MBP (2012 or 2013 not sure which!) is having an issue. When I try to login, my password is accepted and then a progress bar appears. After a quarter load, my mac turns off. Unfortunately safe mode (holding shift) does not work. I have tried smc and pvram resets and repairing through disk utility. None of this has worked...
I'm running yosemite. The last thing I did before logging off is installing divx web player.
Info:
MacBook Pro with Retina display, iOS 8.1.1
this morning suddenly my macbook air is in safe mode and the caps lock key doesnt work and always in capital letter. The number key doesnt work also.
View 2 Replies View RelatedI have a 21.5 inch iMac and am running Snow Leopard. I am familiar with Safe Mode and I understand that it does a disk check and repair and also does some cache clearing during a startup process that allows the user to startup into a system where certain kernel extensions, etc, are disabled to allow for trouble shooting. Then the user can do a restart and end up back in normal mode.
My question is whether starting up into Safe Mode could prove beneficial as some sort of routine maintenance?
Leopoard 10.5.2 - Quad Core Mac Pro.
I'm trying to start up in safe mode, per a recommendation from Objective Development, for a Little Snitch upgrade. I'm following these steps perfectly, and I see no indication that I'm running in safe mode. Of course, I've never seen safe mode, so I'm not sure what it looks like, but I'm guessing I ain't in it because I never see the "Safe boot at the login window".
Quote:
To start up into Safe Mode, do this:
1. Be sure the computer is shut down.
2. Press the power button.
3. Immediately after you hear the startup tone, press and hold the Shift key (the Shift key should be held as soon as possible after the startup tone but not before).
4. Release the Shift key when you see the gray Apple and the spinning gear. Please be patient, booting in Safe Mode may take some while.
During the startup you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
I started (because I wanted to) my MBA into safe mode. Just hadn't tried it before. It took, what seemed, an inordinate amount of time to boot.
I pressed the shift ket at the BONG and released at the spinning gear screen. Is this normal? Does OS X perform disc read/write, verification, cache handling, etc. that causes the lengthy boot.
on pc, when they get software related issues, i press F8 for Safe Mode and im in 9/10 times. on Mac, I've never gotten Safe Mode to work when there's a problem.
say i DID get into safe mode, whereas i couldn't get in regularly. what more could I do that I couldn't do from disk than Repair permissions?
I guess what i'm getting at is WHAT IS SAFE MODE GOOD FOR?
I have a G4 533 and up till 3 weeks ago it worked wonderful for a mail server. I have 1.5gb and a 300gb hard drive which has been working wonderful with no conflicts. When restarting after a software update, I noticed on the start up screen that it restarted in "safe mode". I checked for a stuck shift key and of course they were just fine. I thought it might be a heat problem because the next day I started it back up and it started normally so I ran disk utility to make sure. The next time I started, no matter if it was cool or warm, it went straight to "safe mode" just for grins, I backed up all my information onto an external drive and attempted to re-install the 10.4 disk and it went straight to the black "kernel panic" screen. "OK" I said, so I took out the 300gb hard drive all together, installed a freshly "zeroed out" 120gb hard drive that I had and then tried to start it up and it went straight back to the "kernel panic" screen. Next, I not only unplugged the cord but also took out the battery which only then would it start up alright. So now that is the only way that I can get the machine to start up in anything other than "safe mode". At this point, it is a pain in the ass but so far it is working. Does anyone have any idea what I have overlooked or what is wrong? I would really like to use the box but it is just a pain in the a$$ to do this.
View 2 Replies View RelatedI have a number of macs one being a G5 1.8 x 2 that has been running 10.3.9 for quite some time with no problems whatsoever. Decided to upgrade to keep in line with other macs but first just to 10.4. Machine only boots in safe boot mode. If regular boot, get message that I need to restart. Restart message reappears and often fans race. May have kernell panic but did hardware test, disk first aid and all hardware checks out fine. Finally downgraded back to 10.3 and machine works fine. Did total clean install with 10.4 again and same results. Is there a firmware I need to upgrade, I can't find one. I have been working with macs exclusively since 1989 (never user a "PC") but I'm perplexed.
View 4 Replies View RelatedI wonder, if there is a possibility to tell OS X to always boot in Safe Mode. Because often, after a power failure, the mac mini boots automatically how he should, but then he crashes while booting.
View 3 Replies View RelatedThis iBook G4 will not boot. I can boot it into safe mode, but that is about it. I have tried resetting the PRAM, to no avail. It cannot even boot off of an OSX disc. When I try to boot it normally, it just shows the Apple symbol, but no progress wheel thing spinning. When I try to boot it normally, it appears as if the hard drive is not being read from/written to, because it is dead silent, but when I boot into safe mode, you can hear the HDD noise. When I booted into safe mode, I checked the HDD's SMART status, and it says "Verified," so I do not think that the HDD is at fault. However, it still has its original HDD from 2004.
View 6 Replies View RelatedSamsung TL350
OS X 10.5.8, MacBook
I cannot get my camera to be recognized by my computer when I plug it in and the computer is normally booted.
* If plug the camera into my MacBook, Image Capture and iPhoto will not recognize it.
* If I plug the SD card into my computer with a card reader, the card will be read just fine.
* The camera works on two other MacBook Pros
* The camera will be found on my MacBook if I boot into Safe Mode
* The camera is found in System Profiler when the computer is normally booted, however, the information provided is limited.
* The camera is found in System Profiler when the computer is Safe Booted, and the camera shows the full amount of information about the camera
When I open the system log and then plug the camera in, I receive the following:
Sep 6 11:46:14 JoAlDe kernel[0]: USBF: 958.769 AppleUSBEHCI0x27b8800::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 3, EP: 0)
Sep 6 11:46:19 JoAlDe kernel[0]: USBF: 963.770 AppleUSBEHCI0x27b8800::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 3, EP: 1)
From what I understand, this means that the computer is unable to see that the camera is a Mass Storage Device, thus it times out and is unable to boot it as such.
So I set up my system with the USB Prober and the associated logging file.
I ran the USB Prober on level 7 while I connected the camera.
I know zilch about reading and comprehending any of the results except this snippet really stuck out to me:
It occurred twice more:
3635.575 [5] Finding driver for interface #0 of Samsung Digital Camera, matching personality using com.apple.iokit.IOUSBUserClient, score: 104999, wildCard = 5
3635.575 [6] Matched: idVendor (8107) idProduct (4152) bcdDevice (256) bConfigurationValue (1) bInterfaceNumber (0)
3635.575 [6] Didn't Match: nothing
Just looking at this particular result, it looks like the computer is unable to identify what exactly USB device is being plugged in.
Powebook G4 won't boot up. Safe mode doesn't work. Reset pram. Went onto single user mode. At first there was a modification and then I ran it a second time until it said HD was ok.
View 12 Replies View Related i just bought this kick ass new display, 20 inches 1680x1050 for only $120.00! its a really good deal you guys should check it out... [URL]
anyhooser, i followed the instructions for clamshell mode and i still cant get it to work. i have a wireless logitech mouse and keyboard, and i cant make them wakeup the computer when it's closed. i think i tricked it into working once or twice but i cant get it to work consistently.
I'm not sure what to do. I haven't tried resetting NVRAM/PRAM or the PMU/SMC, but are there other options I can try besides those?
View 1 Replies View RelatedTroubleshooting a broken display on a 13MBP with OSX Lion. Target is 2011 27' iMac running Mavericks.
Info:
iMac (27-inch Mid 2011), OS X Mavericks (10.9.3), Office for Mac
Been having probs w Mac Pro w Lion seeming to hang on shutdown/restart. Have 'reopen windows' unchecked in prefs. Was able to run through safe mode boot once but now seems to hang about 20% in everytime. Have had to do shutdowns w power button (I hate that) or /by ctrl-option-command-esc Boot single user run rack -fy says 'apparently ok'Mount -uw / reports removed 10 orphaned or unlinked files and 10 directories?
Info:
Mac Pro, 2xDual2.66, 4GB, GeForce 7300 GT, 23" Apple LCD, Mac OS X (10.5), G4 Cube, Rev A/C iMac, NeXTCube,PwrMac8500,Quadras,SE30s,MacPlus
My Mac Pro main boot drive us encrypted. I booted into recovery mode the other day & it wouldn't let me boot back o my main drive. Now upon start up I can't enter either recovery mode nor safe mode nor chose the main drive to boot from. I'm absolutely stymied in what to do.
View 3 Replies View RelatedI have been unable to restart me computer after a software update (White screen/apple logo/spinning wheel continuously). I have tried to start up in safe mode (holding down shift key) but it hasn't worked.
Info:
MacBook, Mac OS X (10.4.6)
my computer wont run in regular mode. The problem occurred when I was changing my resolution and I pressed the wrong one. The screen went blank so I restarted, then the screen turned black after the apple logo. Now I can only run in safe boot. Is there any way to change the res. for the regular boot in the safe boo mode?
View 1 Replies View Related
