OS X :: Kernel Panic Power Icon Pops Up When Booting From CD
Sep 27, 2009
Today I was preparing to get rid of my bootcamp'd windows7, change the partition size, and install XP. Well, I decided instead that I would just get a fresh OS X install, and install XP through the new bootcamp. So, I popped in my XP disc and went through the partition manager that comes with it (I don't know how to do it through mac) deleted all my partitions and installed windows so I could operate the cd-drive, and put in my OSX install disc.
(Perhaps I should mention I formatted it all to NTFS, thinking I could just reformat the whole thing with the OS X install like you can with windows). So, now I have a full NTFS partition, XP works fine. I can put in my OS X cd, restart and attempt to boot from a cd either from holding down option, or c at boot. When I try to do this, it pops up the kernel panic power icon, and gives me the "restart your computer" message. In recap my computer kernel panics on boot from cd.
Here's the question: Is this a true kernel panic, or is it due to the fact I don't have a partition available for mac to boot from? I didn't change any hardware, it was working perfectly fine prior to the -attempted- reinstall, and my XP install is working fine (minus the drivers), and after some research kernel panics tend to happen after hardware failures, in fact I had one happen a few months ago when my video card bit the dust.
View 6 Replies
ADVERTISEMENT
Dec 5, 2009
Mac G5 ppc OSX10.4.11
Starting up from any boot disk will give me a kernel panic forcing me to hard restart.
Background:
After many freezes I ran disk utility and I get:
Checking Catalog file.
Invalid index key
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So I use my wife's Imac startup disk to boot it in order to repair but I get the dreadfull death screen (I know how to press the C)
I'm thinking maybe it's because her disk if for her Intel proc so I go and buy a copy of disk warrior 4, and same problem.
View 1 Replies
View Related
Aug 21, 2009
I'm having a weird problem with a 15" I bought in February (2009). I can boot up fine into the OS without any problems. But when I try to boot from the reinstallation CD to do a clean install, I keep getting a kernel panic. (And yes, I do need to do a clean install.)
View 2 Replies
View Related
Sep 10, 2009
I've just had two kernal panics. The second time it was during start up. Now it won't start up at all. Gets to the White screen and tells me to restart. I bought this 8 months ago and have had nothing but trouble.
View 10 Replies
View Related
Nov 20, 2010
I'm getting a kernel panic at start up and my mac wont boot up. I don't think its the RAM because the LED's are not red on the risers. When I start up holding "option" and select to boot up from the DVD it goes to the apple logo and on to the kernel panic. When I start up windows via bootcamp everything works fine. I've fsck. resetting PRAM, NVRam, nothing seems to work.
View 1 Replies
View Related
Nov 2, 2010
Yesterday I purchased a INtel X25-V SATA SSD and installed it in my 13 inch MacBook Pro. Upon booting to a CD so I could install OS X 10.6 on the new drive, I received a kernel panic. After numerous tries I then put the old hard drive in (now clear of any data) and tried to boot to a CD again. Same problem. Now I seem to be stuck with a computer that will not boot to the CD no matter which hard drive is installed. I am able to use the SSD/HD in target disk mode. I can even install OS X to it from a different computer, but then when I try to boot on the MacBook Pro itself, I receive the kernel panic. The kernel panic seems to occur regularly after the Mac tries to load the CD for a minute or two.
View 4 Replies
View Related
Aug 11, 2010
my used eMac 1.42 ghz with 2gb ram, tiger 10.4.11 began to freeze a few months ago so I cleared the hard drive and reinstalled = worked ok for a while. Now, it is regularly freezing and even locking up when it has been running for a while - when it heats up. Until it cools off a while, on restart or after shutdown, it will hang at the grey screen or display a flashing folder with an alternating finder icon and a question mark - I assume it can't find the OS. After rebooting, I got the report function with this info
View 1 Replies
View Related
Apr 17, 2012
a bit complicated.  I have a 3 year old iMac, Snow Leopard 10.5.2 on the dics, but I updated it so..a pretty receent version of Snow Leopard. I had had kernel panics before- it turned out to be a bad RAM chip, replaced it and it fixed the problem.Â
This time, I was hoping it was the same. I got a new RAM chip, swapped them out and ID'ed the bad one. Reseated the RAM. Probelm is, when I was trying to fix the problem, I had booted in Safe Mode. Now the iMac starts up normally- the chime, the Apple- AND the Safe Mode bar.
Which progresses for about 5 seconds before another Kernel panic descends. This happens whether the keyboard is connected or not. At this point the Safe Mode at startup bugs me more than the kernel panics! Sigh.Â
I wonder if there's any key combo on startup I could try to at least get out of Safe Mode before Kernel panic sets in. When my laptop has a kernel panic i can usually repair with Disk repair on CD.  I realize this sounds hopeless! And i need it repaired, but money is an issue.
View 1 Replies
View Related
Sep 8, 2007
I'm relatively new to Macs and I wanted to try a clean install (or erase and install) on my ibook. I recently purchased a MBP and since Leopard is on the horizon, I wanted to do a "trial run" of installing an updated operating system. I know that you can just hit update instead of doing a clean install, but I've been reading that things run better when you do a fresh install. My old ibook still has Panther on it and I figured I could try to install Tiger on it from my MBP disks.
I know that this represents a violation of the license, but I thought it would be worth it to ensure that I don't make any major mistakes when I'm doing the same procedure with my brand new MBP when Leopard gets released. When I tried booting from the disk from my ibook I got a kernel panic which I interpreted as a sign that it was not a good idea so I abandoned the project. Now every time I try to start my ibook I get another kernel panic and I'm afraid I just broke my old computer.
View 5 Replies
View Related
Mar 18, 2012
I have a Macbook Pro 17" (Model A1229). Since some days I am unable to boot into OS X. Regardless if I boot from internal hard drive, external USB drive, Mac OSX Install DVD or an Install Image of OS X on a USB Stick. Every time I boot OS X I get a kernel panic after some seconds. Sometimes the grey spinner (below the apple during boot) just stops spinning (no kernel panic then).
In the beginning I was sometimes able to boot into OS X but it only lasts a few minutes or seconds and then freezes or I was getting a kernel panic. Now I always get the freeze or kernel panic during boot up. As it also happens when booting from external sources it can not be the internal hard drive (also already changed that drive). So I thought it must be the logic board or something but I can run windows 7 on the machine without any problem! I already tried SMC and PRAM reset...
Info:
MacBook Pro 17" (intel), Mac OS X (10.5.1), - iPhone - Mac Mini (intel) - Time Capsule
View 4 Replies
View Related
Apr 22, 2012
I put a second hard drive in my Power Mac G4 Quicksilver 2002, and I decided to clone the old HDD to the new. The first time I tried it, it went on, never starting, just saying "calculating estimated time." In my foolishness, I closed the window, and ignored the warning. The second time I tried it, it went on for a good while, so I left it to it. When I came back the kernel panic screen was up. I restarted the computer, and checked the second HDD. It had about half of the Applications copied into it, so it was working initially. I booted with my install DVD, and ran disk utility and both disks were fine, no repairs needed.
This was the kernel panic info:
Interval Since Last Panic Report: 25215 sec
Panics Since Last Report: 1
Anonymous UUID: DBA4349C-EFC0-4AA9-83BD-CCE4AD0E89E3
Sun Apr 22 19:31:59 2012 Unresolved kernel trap(cpu 0): 0x300 - Data access .....
Info:
PowerMac, Mac OS X (10.5.8), Airport Card
View 14 Replies
View Related
Jun 20, 2012
A few days ago the lightning strikes in. My old PowerPC Mac, running on OS X Leopard won't work after it, he was turned on ...He says that I have to restart my Mac. I've tried a Safe Boot ( 3 times ) but nothing helps. Could it be that he has an internal damage???When I start him up he makes some strange noises ...Â
Info:
PowerMac, Mac OS X (10.5.8)
View 1 Replies
View Related
Oct 12, 2007
I have a G5 tower and randomy since last night my computer did that whole kernel panic thing then i restarted... sometimes it didnt boot up the computer just sat there. Other times it loaded and the computer would work for sometimes 5 to 30 mins before freezing again. What do you think it is?
Information:
Dual G5
Mac OS X (10.4.1)
View 10 Replies
View Related
Nov 30, 2007
I am running a quad core G5 PPC. I updated to 10.5.1 last week when it was made available and had no problems until yesterday. I tried to empty the trash and immediately had a kernel panic. I restarted and that is when the problem became more apparent then a simple restart! The Kernel Panic continued to repeat itself on the startup screen. I called apple support and went thru all the steps with them including trying to boot from the OS X 10.5 disk, in safe mode, as a target, trying to reset the (I guess I forgot what we were resetting but I was told to hold down Apple-R and Option-P) as well as opening the case and holding down the small button underneath the RAM. Anyway, nothing worked. Even in target disk mode, it made my G4 Powerbook running as the main pop up with a kernel panic! I cant get to the finder to see what the kernel panic parameters are.
Information:
G5 Power Mac
Mac OS X (10.5.1)
PPC
View 3 Replies
View Related
Mar 14, 2012
this morning my PM G5 quad won't start, also with 10.4 dvd install disk.When start lo load from DVD I've this Kernel Panic.
Info:
PowerMac, Mac OS X (10.4.11)
View 14 Replies
View Related
Apr 2, 2012
Out of the blue I keep getting a kernel panic (You must restart computer) while using my G4. All I use it for is word processing and internet browsing. Seems to happen when switching between windows.Here is my most recent crash log reports:Â
Mon Mar 26 21:27:00 2012Â Â
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000002B154200 PC=0x00000000000ACD04
Latest crash info for cpu 0:
Exception state (sv=0x2708C280)
[code].....
Info:
g4 desktop, Mac OS X (10.4.8)
View 1 Replies
View Related
Apr 27, 2012
Last night I was defraging my G4 OS Tiger 10.4.11 and at about 53% the power went out. Now all I get at start up is the Kernel Panic screen. What should be my first step?
Info:
PowerMac, Mac OS X (10.4.11)
View 3 Replies
View Related
Oct 10, 2007
Last week, after completely normal use, the computer booted up to a screen with the finder icon / flashing question mark. After a few more atempts to power up i started getting just the grey apple screen with spinning wheel and loud fans. I was advised by a friend to boot from the install DVD by holding alt when powering up. When i try this, after selecting the DVD from the boot up options, I get kernel panic and the message " panic: We are hanging here...". Then nothing.
Information:
G5 Dual 2.0
Mac OS X (10.4.5)
View 8 Replies
View Related
May 22, 2012
Using iMovie and got a (-50) error and ran Disk Utilities to see if everything was okay. Unfortunatly it wasn't and recomended that I hold down the command and r key while doing a restart. When I do this, the Apple logo comes up, but then switches to an icon of a circle with a diagonal line through it and then I get a kernel panic shortly after. how my App Store purchesed lion can run disk utilities in protected mode?
Info:
MacBook Pro, Mac OS X (10.7.2), 3G iPod nano 8 Gb, 1.42 G4 mini, 5G nano 16 Gb
View 1 Replies
View Related
May 27, 2010
When I open VLC player, a white drive pops up on my desktop, how do I prevent/hide that icon from appearing?
View 7 Replies
View Related
Aug 30, 2009
Sounds like a desperate need for some Kentucky Fried Chicken while waiting for your 10.6 install.
View 2 Replies
View Related
Jun 29, 2012
I am just starting a new job and have been getting extreme speed issues on my computer followed by this recent kernel panic. I am running 4 2 TB G Speeds through eSATA. My computer went down, when I brought it back up Final Cut Pro took 5-10 minutes just to simply open. I wasn't even attempting to open a certain project. Any ideas based on the attached Kernel report? [code]
Info:
Mac Pro
View 1 Replies
View Related
Nov 7, 2010
I'm getting a kernel panic at start up and the optical drive wont read the start up DVD. I can boot up windows via bootcamp and the machine runs fine. I'm not getting any red LED's on my risers, so i'm assuming its not a RAM issue. I have a Mac Pro 8-core (2008) stock, just added 10 gigs of RAM.
View 1 Replies
View Related
Nov 26, 2010
For the past few days (never happened before) my apps started crashing continuously and kernel panic screen started appearing very frequently. I am still wondering what may be the cause of it, then I tested my RAM with Rember, and this log showed up:
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
View 3 Replies
View Related
Jul 7, 2007
I know a lot of people dread this, let alone ask this. But how do you cause a voluntary kernel panic in 10.4?
View 8 Replies
View Related
Aug 8, 2008
I get kernel panics after a few min's of running the Mac pro. The ram are perfectly paired (2x 4gb in both slots, both in the first 2) and I get issues with it it seems. It started to happen as of today but didn't happen the days before. Nothing was changed in the configs or software.
View 3 Replies
View Related
Mar 18, 2009
I recently got a Dell 2209WA with built in USB hub. and great i thought, i can manage the USB ports on my macbook a bit more effectively. But it seems when i pull the USB cable when i want to go portable, it gets a KP, at the moment i suspect it has something to do with the logitech wireless adaptor i have plugged into the monitor. it exhibits these issues when the monitor is turned off as well.
I have another USB hub, but i pretty much use it exclusively for my external hard drives (i don't really like to keep it plugged in all the time, if powered up for some reason the drives spin up in the middle of the night even when the macbook is sleeping) and it does nothing like this when the adaptor is plugged into that.
View 2 Replies
View Related
Apr 11, 2009
I've had two of these in less than 24 hours on this new machine. I was able to work in Photoshop and Aperture fine, but the minute I started watching Hulu videos I started getting these. Oddly enough. I zapped PRAM and repaired permissions, and haven't had another one yet... but should I just take it back now while I'm still in my 14 days?
Here is the log:
Mac OS version: 9G3553
Kernel version:
Darwin Kernel Version 9.6.3: Tue Jan 20 18:26:40 PST 2009; root:xnu-1228.10.33~1/RELEASE_I386
System model name: MacPro4,1 (Mac-F221BEC8)
View 9 Replies
View Related
May 3, 2009
Happy for my macbook pro for almost two years. Lately it's been unstable and freezes sometimes. Two days ago it went to kernal panic and shows kernal panic screen and asks for restart everytime it restarts. It won't start on DVD or safe mode (it just hangs there and keeps spinning). For single user mode, it first worked and I was able to remove login items, but it froze again and now generates the following panic log. All the hardware have been the same and I have installed vpn a few months ago and dropbox last week.
Jettinsoning kernel linker.
Resetting IOCatalogue.
GFX0: family specific matching fails
Matching service count =1
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
May 3 11:51:15 localhost DirectoryService[20]: Launched version 5.6 (v514.24)
Previous shutdown Cause: 3
ath_attach: devid 0x24
yukon: Eithernet address xxxxxxx
Override HT40 Powers. EEPROM Version is 14.4. Device Type 5
NVDANV50HAL loaded and registered.
GFX0: family specific matching fails
GFX0: family specific matching fails
GFX0: family specific matching fails
Matching service count = 0
May 3 11:51:24 localhost configd[28]: Error: No interface name for AirPort_Athr5424ab
May 3 11:51:24 localhost configd[28]: Error: ioPublishedDriverCallback() failed to initDeviceFromService()
May 3 11:51:24 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[48]: starting
AirPort_Athr5424ab: Ethernet address xxxxx
AirPort: Link down on en1
May 3 11:51:32 xxxcomputer fseventsd[72]: event logs in /.fseventsd out of sync with volume. destroying old logs. (13 218 724)
AirPort: Link up on en1
AppleYukon2: 000000.00000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:32 xxxcomputer fseventsd[72]: log dir: /.fseventsd getting new uuid: xxxxx
May 3 11:51:32 xxxcomputer ntpdate[88]: can't find host time.apple.com
May 3 11:51:32 xxxcomputer ntpdate[88]: no servers can be used, exiting
AppleYukon2: 0000,0000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:41 xxxcomputer /usr/sbin/ocspd[97]: starting
May 3 11:51:32 xxxcomputer /system/library/coreservers/loginwindow.app/contents/macos/loginwindow[68]: login window application started - threaded auth
ciscoVPN: attempting to attach to all available ethernet interfaces.
ciscoVPN: checking if we are already attached to interface: en1
ciscoVPN: no, not yet attached to interface: en1
ciscoVPN: interface: en1, filter attached.
ciscoVPN: current MTU for en1 is 1500, saving it.
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x0019ca06, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x01b51000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x0549c004, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x36077b58, ESI: 0x00000000, EDI: 0x36077c3c
EFL: 0x00010246, EIP: 0x0019ca06, CS: 0x00000000, DS: 0x00000010
Error code: 0x00000000
Debugger called: <panic>
Backtrace (CPU 0), Frame: return address (4 potential args on stack)
View 6 Replies
View Related
May 14, 2009
I was updating my mothers ibook G4 and after the two restarts it gives me this. Is there any way to get past this she does not have a back up of her HD.
View 6 Replies
View Related
