PowerPC :: 12" PowerBook G4 Not Booting Properly Unless In Safe Mode After Clean Install
Jun 29, 2009
I recently purchased a sort of beat up 1.5GHz 12" PowerBook G4, top of the line, and it arrived today. It boots up normally when the apple appears, then it shows the blue screen and then the mouse turns into a spinning wheel. Also, when I move the cursor, a second cursor from the same spot stays in the top-left corner. The PowerBook will only work normally as a headless server (powers on, lid closed), unless booted in safe mode. Another issue is the screen. The seller said there were lines going up and down the screen, but it varies depending on what is displayed on the screen. If the screen is grey or in target-disk mode, they do not appear, but on the 10.5 standard desktop pic, it changes pattern. The lines can be seen here: [URL]
My G4 powerbook has been saying recently that the start up disk is full, so i tried to empty some stuff off it. But not long after this when i tried booting it up the normal happens at first ie the t'ing' start up sound and the apple sign with the little timer going round but it does nothing else, it just carries on going round. I have tried re setting it and looked on help sites like this to try and override it etc but nothing seems to work!
I was getting a error code 36 on my mac so I decided to try to boot up in safe mode now my macbook pro will not stop trying to boot to safe mode. I am on snow leopard.
Major issues here please I can use all the help I can get. My MacBook Pro 13" Unibody Aluminum is booting in safe mode everytime. I restate. Someone has advised my shift key could be stuck? How the he'll could that have happened? It's only a few months old, I just upgraded hard drie. My trackpad was running funky before that. My keyboard was acting wired, only symbols showed up.
a bit complicated.  I have a 3 year old iMac, Snow Leopard 10.5.2 on the dics, but I updated it so..a pretty receent version of Snow Leopard. I had had kernel panics before- it turned out to be a bad RAM chip, replaced it and it fixed the problem.Â
This time, I was hoping it was the same. I got a new RAM chip, swapped them out and ID'ed the bad one. Reseated the RAM. Probelm is, when I was trying to fix the problem, I had booted in Safe Mode. Now the iMac starts up normally- the chime, the Apple- AND the Safe Mode bar.
Which progresses for about 5 seconds before another Kernel panic descends. This happens whether the keyboard is connected or not. At this point the Safe Mode at startup bugs me more than the kernel panics! Sigh.Â
I wonder if there's any key combo on startup I could try to at least get out of Safe Mode before Kernel panic sets in. When my laptop has a kernel panic i can usually repair with Disk repair on CD.  I realize this sounds hopeless! And i need it repaired, but money is an issue.
My mac was being very, very slow so I turned it off, then as it it was booting it was taking ages so i restared in safe mode. While booting in safe mode the black bar at the bottom goes around 2/5 of the way across and then my macbook just switches off.Ive tried:fsckdisk utility repair/verifyreinstalling OS X LionÂ
When i tried to repair, it said i needed to erase everything and reinstall the OS. Last night when i tried to it said both drives are locked so i couldnt. And now when i just tried again, neither drivers are appearing; the box is just blank.Â
Let alone my livelyhood on the laptop, i have thousands and thousands pictures which if lost, would genuinley heartbreak me. I have much valuable data on my laptop and i really dont want to erase all data, because me being the gigantic fool that i am, i only have one time machine back up from about a year and a half ago. Â
My iMac will not boot normally only in safe mode and then all programes keep flashing.Safari and mail continuously flashing grey lines..Reset the PRAM and it worked but turned the computer off and on again and its gone back to same problem...It's an iMac 27" late 2013 3.2 ghz
Info: iMac (27-inch, Late 2013), OS X Mavericks (10.9.4)
My macbook (early 2008 model). Looks like my disk drive isn't working correctly; I put in a new hard drive. I went to reinstall Snow Leopard then upgrade to Lion. Ever since then my mac only seems to work in safe mode. I used my imac to load snow leopard (with firewire); and downloaded lion from app store. Is there a way to wipe clean and start over? There is nothing on the computer that I need. I keep all my important files on an external hard drive. My big concern is I don't know how to do it and second since I don't have a disk for lion will just going back to app store allow me to re-download or will I have to pay 30 bucks again.
Info: MacBook (13-inch Early 2008), Mac OS X (10.7.3)
Yesterday I installed Ice Clean and ran a few of the maintenance procedures. This morning when I tried starting my laptop, it started with grey screen and apple symbol, then black screen with white text stating: Mar 13 08:02:44 launched: can't exec /bin/sh for single user: no such file or directory.
I tried contacting Ice Clean, they claim it is not related. I checked my system profile and I thought I had 1gb of RAM it only says 512gb. Could a RAM failure cause this problem? Have started using target disk mode with my old faithful G4 and everything on the hard disk is still intact. Ran disk utility and all ok!
It boots to BSD (Command Line Interface) instead of OS X (GUI Aqua)
This Video shows more
[URL]
Please note that the screen on the PowerBook is broke so I can only use it connected to an external monitor
When I try to reinstall the system, the picture does not get pushed across to the external monitor meaning I can not see what I am doing and thus can not reinstall
I'm having a problem with my Powerbook G4. I kind of screwed up my drivers because I was an idiot and tried to get some Intel drivers to work on the computer through some cheat thing and now my computer won't boot up. I have an install disk but when I try to reinstall it keeps saying that I need Mac OSX Install Disk 2. I never had to use disk 2 before and I never had one to begin with.
I know very very little about computer parts and things like that, but I hope to have provided enough information. When I boot up, both plugged into the power cord, and on battery, the powerbook will reach a white screen with an apple logo in the center. There also is a rotating disk below the apple logo. It will then shortly power down. I made a visit to the genius bar, and they told me something was wrong. I was like DUH!!! They said for $320 it would all be fixed, but I was hoping to be able to find out what was going wrong with it. Sadly I don't have the start-up disk that came with the laptop .
I am trying to do a clean install of OSX 10.5 on my old powerbook G4 15". I am using a 10.5 image file on my external. I partitioned the external using GUID, and restored the image file onto the external. (this method works when installing on intel macs). Unfortunately, I cannot boot 10.5 using this method on my powerbook. Is it because i am using a firewire 800 cable? Should I be booting it using a firewire 400? I know that PPC macs cannot boot using usb, so i am stumped.
I have a problem...my 12" Powerbook G4 doesn't start up properly at the moment. I turn it on, I can hear the chime, and the screen goes grey but then does nothing...I've tried holding down C while starting up too, but still nothing happens, just the grey screen.
during startup, my powerbook will shutdown during the gray screen I've tried booting from an external drive. It goes to a gray screen without an apple logo.I've tried putting it in Target disk mode (to get my files off). But it won't mount on my desktop.Also tried resseting the pram as apple's troubleshooting suggested. nothing differen
Here's the rundown: my uncle gave me a pristine Powerbook G4 Titanium edition. Good computer, 15.5" screen, definitely worth keeping. He wiped the thing clean before giving it to me. The problem is the internal CD drive is super flaky and won't take an bootable CD well. It took my Tiger bootable once or twice and bonked out during the installation. Now, I can't get anything. BUT, I have a nice external firewire 400 CD/DVD drive. I hit option and can see the disc, but the PB won't take it. Also, of course I hit C on startup to try and load from the CD. Hasn't taken since the first few tries.
Is it safe for me to migrate all the contents of my powerbook G4 12" to my brand new 13" aluminum macbook? I thought it would be too much trouble to load all my iPhoto pictures, iTunes music, registered programs, and firefox bookmarks. Any downside to doing this? I'm assuming since there are no viruses on OSX, that I will be fine transfering everything directly over to the new laptop are, correct? It's just too bad this is going to take 3 hours!!! All I want to do is play with the new macbook.
Upon start up, I hear the chime, see the grey Apple load screen, but then after it just reaches the blue screen and stops. Cannot reach login screen, unless in safe mode.Steps I've tried:
-Reinstall tiger (erase and install) -Replace CMOS battery (time now works correctly) -Run Apple Hardware Test (no errors)
I am using a Late 2009 Mac Mini. This afternoon I did a software update, it was 4 programs that were updated. I didn't take a look at what was updated, which was a mistake, I know. But anyways, they installed fine, and the Mac rebooted, it got to just before the user select/login screen and hanged there. I was able to move the mouse around, but nothing else, and after a long period of time, I powered off my Mac, and now it is hanging at the Apple logo.
I tried booting into Safe Mode, and the grey progress bar would appear but and get half way through and then disappear. Next I tried inserting the Install DVD, hold down C while it was booting up but that wouldn't do anything.
I've got a Powerbook G4 that has a booting issue. I will hear the startup "dong" a whirl of the drive, then it doesn't go to the grey screen with the Apple. It just sits there with a black screen.If I wait a few hours and try it, sometimes it starts up fine, or sometimes it will sit on the grey screen with the Apple symbol and do nothing.If it does boot correctly, none of the USB ports work. Any ideas on if its worth trying to repair since its 2 and a half years old and I didn't get the Apple Extended Service plan?
I'm a new Mac user for about 6 months now. I bought a used PowerBook G4 15" 1.25 ghz notebook that was in good condition. It was well cared for by the previous owner. Only thing she had done was update the ram to 2 gigs.Recently I began to notice it running slower, programs were freezing and Garage Band couldn't run as many tracks. I installed recommended software updates before it started to get slower and I thought maybe that was the problem.So I attempted to do a fresh swipe of the hard drive and start from nothing. I saved some files and then tried to run the software installation cd. It didn't really help at all. I can't remember the error but it wouldn't let me reinstall OS X even when I held "c" when starting up. At one point I must have clicked run in target mode because I booted it up and it showed an unfamiliar screen. Then I restarted it once again and saw on Disk Utility that S.M.A.R.T. said something about hard drive failure.
This iBook G4 will not boot. I can boot it into safe mode, but that is about it. I have tried resetting the PRAM, to no avail. It cannot even boot off of an OSX disc. When I try to boot it normally, it just shows the Apple symbol, but no progress wheel thing spinning. When I try to boot it normally, it appears as if the hard drive is not being read from/written to, because it is dead silent, but when I boot into safe mode, you can hear the HDD noise. When I booted into safe mode, I checked the HDD's SMART status, and it says "Verified," so I do not think that the HDD is at fault. However, it still has its original HDD from 2004.
i splashed some theraflu on the right side of the keyboard approximately 3 days ago. as many had mentioned, i removed the keyboard and carefully removed any liquid residue i could find and kept my computer off for a few days. today i went to figure out the damage and everything seems to work okay in terms of the computer turning on and stuff. the keyboard is still acting up though. the left side of the keyboard works mostly okay, but if i press certain letters, the number along with random number appears. the right side of the keyboard, on the other hand, several keys don't even respond at all. from these "symptoms" do you guys think the only thing that i may have to replace is the keyboard or could these "symptoms" i've described be related to some other damage also? how much does replacing a keyboard usually cost? i'm thinking this isn't going to be covered by my warranty. lastly, i've noticed that when i do turn the computer on, it automatically starts in safe-mode.
Powebook G4 won't boot up. Safe mode doesn't work. Reset pram. Went onto single user mode. At first there was a modification and then I ran it a second time until it said HD was ok.
Is it possible to mod a PowerBook to use the MagSafe adapter instead of the regular adapter? I'd be willing to do it myself, but I haven't found any real consensus on whether or not it's even possible.
Im looking for any directions on a mod that will enable my pb to act like a Mac Book Pro with the two finger trackpad ctrl click function. Or an actual second button hardware Mod.
My 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?
