Intel Mac :: Get A Box For 2006 20"?
Apr 28, 2012I need to ship my old iMac to my father who lives on east coast and I'm from CA. Long tim ago I throwedoriginal box away. And now I have a problem how to mail the desktop to him.
Info:iMac
I need to ship my old iMac to my father who lives on east coast and I'm from CA. Long tim ago I throwedoriginal box away. And now I have a problem how to mail the desktop to him.
Info:iMac
Seems to be happen at any time. Will not respond to force quit and does it all the time if viewing youtube? Sometimes screen turns black but mostly just freezes.
Info:
iMac, Mac OS X (10.6.8)
i have an imac intel core duo late 2006 model... with a 20 inch display... it has 128mb vram and i'd like to add another display. i run my mac with the highest resolution of 1680 x1050 and i'd like to keep this resolution and add another display maybe another 20" screen. has anyone done this? and what are the performance results... will there be any lag or problems?
View 4 Replies View RelatedI have a 'aging' 2006 mac pro with dual 2.66 mhz cpu's. The system is snappy enough for most tasks on the mac side but when running windows 7 pro 64 bit and ripping some of my bluerays the cpu's peg at 100% and it takes a while. My question is how does my 2.66ghz dual cpu mac pro compare cpu wise against the new intel core i7 930 cpu family? I know I cannot drop one into my mac pro but I have been thinking about building a new pc with the i7 and picking up a mac mini for my wife who refuses to leave the mac camp then sell my old mac pro.
View 2 Replies View Related2 gb ram maxed out?i just want it to play with on here.
Info:
MacBook Pro
As the title suggests, I am after info on anyone who has a 2.16Ghz Intel Core 2 Duo iMac and has upgraded the hard drive to be a SSD. My iMac is going in for repair this weekend due to a broken power supply, I had the original 500GB hard drive taken out, but I'm thinking about upgrading the hard drive to an SSD, however as the current SSD's are SATA-III I'm not sure if it would work. Ideally I would like to keep the 500GB hard drive in there as well as the SSD.
Info:iMac, Mac OS X (10.5.6), First Gen Intel (2006) 2.16Mhz
I can't do anything longer than 5 minutes before it freezes and I have to restart it. Its really annoying. Also yes it is in a well ventilated area and I downloaded a system prefs add on to control the fan.
Info:
iMac, Mac OS X (10.6.8), its a white iMac
I have an IMac, early 2006, A1174. Went to awake it from sleep last night, and the power was off. I hit the button to turn it on, no response. I tried different outlets and power cords, same results. The front light doesn't come on, but I do hear the spinning for a split second. I've never had this problem before. I tried leaving it unplugged for several minutes, and I also unplugged my printer, keyboard, external hard drive, everything! No different results.
Info:
iMac (20-inch Early 2006)
I Have a 17' iMac 2006 It has had lines in it for a while and i have called Apple Support and they have not helped me at all and no my entire screen has went out it makes it impossible to do anything I am having to try to use my dads Macbook to do my College homework?
Info:
iMac (17-inch Late 2006), Mac OS X (10.7.4), With crapy screen lines
I just downloaded 10.6.8 and now Quicken 2006 won't open files
Info:
iMac (24-inch Early 2009), Mac OS X (10.6.8)
I have an iMac that is exhibiting symptoms of a video card going bad. Are video cards replaceable in the 20" white iMacs from early 2006?
Info:
iMac, Mac OS X (10.7.3), 20" iMac early 2006
I have a 2006 White Intel Imac and I recently replaced the Superdrive with a non apple Panasonic Superdrive Model: UJ-85J-B from a used Acer Laptop. The replacement drive has no sensor circuit board. After putting it back together there was a loud humming noise and I assumed it was the new drive but when I took it out and started the Imac without it the noise remained? Now I am thinking it is the fan just below where the Superdrive sits? I blew out as much dust as I could from this fan and around the bottom of the case and that made the noise just a little less annoying. It sounds like it is about to take off like an jet airplane?
Info:
iMac, Mac OS X (10.6.8)
Apple keep telling me I need to update to icloud but I'm not sure if Lion will work on my Mac. I've upgraded to snow leopard which seems to have knackered my .me or .mac account (whatever it's called now), so I don't seem to have any option but to upgrade to Lion if I every want to see my emails again. Apple say I must have a Intel Core 2 processor for Lion to work. at least I think that's what they say. I have a mac book pro, 2006 with an 2.16 GHz Intel Core Duo processor, can I update to Lion?
Info:
macbook pro, Mac OS X (10.4.10)
... after upgrading from Tiger to Leopard. Did a straight upgrade from install (not an archive & install).
It gets to the login screen quickly, enter password and then endless beachball.
Started in single user mode and did fsck, restarted from install disk & repaired (no problems) and repaired preferences. Restarted with PRAM reset. Restarted in safe mode.
No problems booting from DVD.
ONE TIME I rebooted after single user mode and it worked, I used that opportunity to run the combo updater (downloaded today from Apple).
I did find a support page that spoke of a similar condition in early aluminum (2007) iMacs, but this file would not install on my machine.
I did an archive and install of Leopard and then updated via Software Update, which should have gotten any updates needed for this machine. Now again, it only boots as far as the blue screen (on auto login). I did not see a similar update file needed for THIS iMac.
Info:
iMac, Mac OS X (10.5.8), model 5,1 2.16GHz 20" core2Duo 4GB
I have 2 questions:1) I have a 2.GHz Core Duo CPU. I read that this model has a socketed CPU that can be replaced. Is this true?2) If yes, how fast can I go? Can I use the new Core i3 CPU?
View 10 Replies View RelatedThe internal optical drive (MATSHITA DVD-R UJ-846) for my Intel iMac (late 2006) stop working after listening to a music CD. I inserted another music CD and the drive will try to read the CD, but after awhile, it would eject the CD. I inserted the last music CD I listened to and it did the same thing. Then I inserted several other data cds into the drive resulting in the same problem.
Info:
iMac, Mac OS X (10.6.7), 2.16 GHz Intel Core 2 Duo
What cause my imac to freeze? running sno leopard, hard drive changed 6 months ago, happens on safari and iphoto(11)
Info:
iMac (20-inch Late 2006), Mac OS X (10.6.8), hard drive replaced 6 months ago.
Recently my iMac had been experiencing problems, I took apart and checked everything and put back together. Problems were gone but the screen suddenly started gradienting from brighter on the top to darker on the bottom. Brightness overall is also lower now.
My question is what can be creating this? The black tape that was around was ripped, I've heard it's creating static isolation, can that be it? Also I possibly pulled power cord too hard, can it be possible that display is not getting enough power?
It's been a while since I was last here but I've come to you guys requesting some help.
I have a 2006 MacBook pro that I've been trying to install a new Intel X18-M 80Gb SSD in, to no avail.
The main problem is that when I pop in the Leopard installer and boot up into it, the disk is not recognized by Disk Utility or even in System Profiler, same thing happens when I connect the SSD via USB while running OSX.
I know the drive is not dead as I can see it in Windows and use it perfectly. I've tried formatting it to NTFS, FAT32, and HFS+ then putting it in the MacBook but it still refuses to see it. I made sure to set it as a GUID partition and I still see nothing in the Installer or even OSX.
I know the drive is SATA II standard (3Gb/s) and my MacBook only has SATA I (1.5Gb/s) so I'm not sure if that means it's a lost cause or if I can do anything about it.
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
Info:
iMac
I have a 2006 Mac Pro and I'm wondering if CrossFireX is possible on this system. Specifically with two 5770s.
My understanding is that CrossFireX requires two PCIe 2.0 16x slots. However, the 2006 Mac Pro only has PCIe 1.x slots, and with two cards, it's only possible to have its slots running at 8x. Does this prevent CrossFireX from working at all, or is it simply a case of it working fine but running at reduced performance?
I currently have an original 2006 Mac Pro (dual 2.66GHz) which has served me well over the past 4+ years but I'm thinking that the time has come to look for a replacement.
Here are the replacement machines I've been looking at along with my thoughts...
2010 MacPro - 2.8GHz Quad
While I like the price point ($2500), I'm not sure how much of a performance boost I will get over my current machine. Also the processor architecture is the previous generation (Nehalem vs Westmere). Is that a legit concern?
2010 MacPro - 3.2GHz Quad
Once again, chip architecture and performance (to a lesser extent due to the higher clock speed) are concerns but $2,900 is doable from a financial standpoint.
2010 MacPro - 3.33GHz Hex
This is the one I really want but $3,700 is out of my price range.
2009 MacPro (Refurbished) - 2.93GHz Quad
This configuration drew some interest when I saw it in the refurbished section of the Apple Online Store mainly due to the $2,500 price tag.
The computer will be mainly used for graphics creation/editing (Photoshop) and web development (Dreamweaver) as well as for web surfing, e-mail, photo and music management and MS Office applications. I also run Parallels because there are a couple of applications that I need to run that are Windows-only.
So my question to the MacRumors' community is which of the above machines would you recommend or should I just stand pat with my 2006 MacPro and wait for the next refresh.
I did consider an iMac but the 21" is a little underpowered IMO and the 27" will not fit on my desk.
My mac pro won't display anything. I've had a look at this [URL] and one of the first things I did was reset the PRAM & NVRAM. The 10.6.8 install is fully updated. The startup chime plays and fans run normally.
I have: re-sat the RAM,cleaned the RAMcleaned the insideremoved all the HDDs except the main oneand even used another Raedon 4850 in place of mine.
It starts up in Target-Disk mode fine, I am using it with my iMac now but it is not the same (iMac is only dual core andhas half the RAM) I've tried several screens; DVI, VGA and HDMI all without luck. It's obviouslt out of warranty and I don't want to take it to a Apple store anyway as I ocassionally build & repair computers myself so am fine with trying anything out.
Things I could do/ haven't done: Remove/ replace the Logic Board battery?test the power I/O?start in Safe Mode?
Info:
Mac Pro, Mac OS X (10.6.8), Also Bootcamp Windows 7
MacBookPro 2006 While cleaning the keyboard, the tab key came completely off. Nothing is broken, the little plastic thing is still in one piece. I can't seem to fit it all back together to get the tab key to stay in place.
Info:
MacBook Pro, Mac OS X (10.7.3)
I've currently got 12GB of DDR2 667Mhz of RAM in my 2006 Mac Pro, could I use 1066mhz DDR2?
View 4 Replies View RelatedDoes anyone now if there are available power ports on Mac pro 1,1 logic board for some additional fans, without running cables down from the optical drives.
View 4 Replies View RelatedI have decided to upgrade the stock 7300GT on my Mac Pro. I have three choices:
)ATI Radeon HD 2600XT
)nVidia 8800GT
)ATI Radeon 3870
I purchased my macbook in 0ct. of 2006, and was wondering how I could tell how much ram I could put in it. I currently have 1gb of ram installed. My macbook is 1.83 ghz intel core duo.
View 1 Replies View RelatedJust a white screen after Apple logo and spinner in middle of screen. OS is 10.6.8.
Info:
2006 MacBook Pro, Mac OS X (10.4.11)
So I was using my early 2006 MacBook (1.8 Ghz Intel Core 2 Duo, tiny amount of RAM) to view a YouTube video, and it froze (gave me rotating rainbow thingy). Since this happens often, I got up to put the computer on the table and do something else. When I picked the computer up, the power cord caught on the table and was pulled off of the computer. Since the battery is 100% dead, the computer shut off abruptly. I've also done this before without trouble. When I go to turn it on, however, now the screen flashes white for a split-second (normal), and I get a gray screen. Eventually, I get a flashing folder with ?. I've tried reseating the hard drive, and pressing down various keys when it starts up, but to no avail. I have a Genius Bar appointment tomorrow, but I was wondering if I could fix it for free... I'm not sure what OS it is, but it's OS X Tiger, I think.
Info:
MacBook, Mac OS X (10.4.11)