What software? For capturing HD video from my display. I have watched some programs (instructional on Photography) but there is no download. I want to save some of them to watch later. I am using Lion 10.3.7.
View 5 RepliesCould anyone tell me what application(s) will capture streaming video and audio on a Mac/
When I first got my iMac (OSX 10.5.2 with Leopard) I had no problem capturing audio/video in iMovie using my built-in iSight. Lately however I get a strange, undulating phase-cancellation sound appearing on the audio track about 10 seconds after I start recording. I can't hear this through my Mac when I'm recording, only during playback. It completely messes up my guitar movies. I have since downloaded iMovie '06 but I get the same problem there too. Is there a fault with my internal mic? What else could be wrong?
View 7 Replies View RelatedGreetings, Could anyone tell me what application(s) will capture streaming video and audio on a Mac.
View 4 Replies View RelatedAnyone know of a Mac OS X software that will capture streaming video and save in a playable format in Mac OS X? Kind of like DownloadHelper for Firefox captures FLV, MP4, MP3, etc... and saves it to your hard drive.
View 6 Replies View RelatedMaybe I'm imaging things. But isn't there a native way to video capture the desktop and or region like you can with a screen cap now?
View 4 Replies View RelatedI have the new iMac 27' and was trying to capture some video from my DVR via a composite cable-USB converter. The composites run into a USB cable. So I plugged the USB cable into my Mac and tried to capture the video. Nothing came up in Toast showing me how to capture or even giving me a option to capture. Anyone know how to capture video using this method?
View 5 Replies View RelatedI have a doubt about FW800 compatibility. I�m about to buy the new iMAC 27" and have in mind to buy a bidirectional video converter: There�s a note that says: "A video capture card or OHCI FireWire connection is required to capture DV. IEEE 1934 FW800 connectors are not supported". But I read that I could connect this device to the FW800 port with a FW400 to FW800 adapter (or otherwise buy the FireWire 800(1394b)/FireWire 400 (1394a) 9-Pin to 4-Pin Interconnect Cable) and would work fine as if was compelling with IEEE1934 rules. I wonder if FCS would recognize the video signal and I�m not making a mistake buying this device. Capturing analog media is part of my services. Any suggestions of a similar device that would work with a FW800 connection? Or the Canopus ADVC110 will work properly in the new iMAC?
View 3 Replies View Relatedis there a free program like snapz pro., that can capture video on your screen?
View 3 Replies View RelatedI'm looking to get some sort of video capture thingy for my new Mac Pro, as in, "hook up a VCR or video game console to it via S-Video or RCA inputs".
I know that there are a few USB/Firewire plug-and-play solutions out there, but i've always been the "put everything on the inside" kind of guy. Back when i was messing around with this before x amount of years ago the most affordable-vs-quality and efficient option for me was a PCI card.
I tried to do some googling on cards for the PCI Express slots in my Mac and was surprised that the options were few and far between and did not actually save me much money versus the USB/Firewire counterparts, so i'm wondering: is my philosophy outdated? Should i conform to the norm and get one of those external solutions, and if so, can anyone speak to the quality of the various ones that are available on the market?
I've found that I have a need to take more than screen shots on my machines. I need to be able to record on screen activities so I can add in clips of the desktop and what not to my iMovie files. I have found a not so free program called Snapz Pro which seems to have what I need. I'm more interested in freeware of course, so are there any similar programs to this one?
View 14 Replies View RelatedI have a Sony DCR-PC100 Camcorder that uses mini DV tape for recording, and am trying to get the video onto my mac. I have tried in iMovie '06,'08 and Final Cut Express, and I keep getting the same problem. I connect the camera via firewire, and set the camera to VTR. The app recognizes the camera (Final Cut even specifies the model number correctly) and can access it enough so that when you hit play it starts the camera playing. But it never gets video or audio coming into the computer, instead it just keeps the capture preview as black or blue. Eventually it just color wheels for a while and freezes or has to be shut down. I am using an iMac G5, but have tried it on an Intel MacBook Pro, and the same problem happens. I also tried it on a PC and it worked fine, so I dont think it is the camera, but I have a lot of video to upload, so I need to do it on my iMac. Does anyone know why this would be happening, and what some possible solutions would be?
View 1 Replies View RelatedI'm trying to capture still frames from video. I found video snapshot, but am not sure if its any good. Does anyone have software suggestions?
View 1 Replies View RelatedI need screen capturing software. Not just snapshot, Grab does well for that matter. I need to capture video and audio from chat (not ichat). Open source, freeware seems don't exist and screenflow or ishowu seems quite cumbersome.
View 1 Replies View RelatedI desperately need to capture some video from the below site: [URL:...] does anyone have any idea how to capture it, not sure if the standard youtube focused ones will do it?
View 5 Replies View Relatedi've connected my DV camera into my computer, its been recognized by final cut, and will let me import (capture). But when i go to import it doesnt divide the footage into clips as its being captured. Is there a way to modify this? Or does it divide after its done importing? Or not at all?
View 1 Replies View RelatedI wanted to get some ideas on how to capture Skype audio calls and the Video from MeBeam.com Since Skype does not allow video conferencing (more than to video calls) I had to resort to MeBeam.com to show the video during the Skype calls. What I want to do is capture both the video feed and Skype audio to archive. At this point it doesn't matter if the audio and video are in true sync. Any ideas on how to capture the audio and video or a program that will allow me to do video conferencing (more than 2 people).
View 4 Replies View RelatedI have a MacBookPro, model: A 1278 (Mid-2010 13"). Is its mini-display port capable of delivering both video and audio output to a HDMI adapter? or just video output only?
Info:
MacBook Pro, Mac OS X (10.6.8), Model No: A1278 (Mid-2010 13")
can anyone tell me if the built in camera on the new imac is capable of capturing video? can this only be done in ichat? i figured out how to take pictures using photo booth but i figured there must be a way to use this camera as a webcam without video conferencing or chatting. any suggestions?
View 8 Replies View Relatedany recommendations for software for capturing streaming video.
I used Snapz Pro demo which was good but the full version is too expensive.
any others I find seem to need my passwords to activate the audio capture features
I would like to shoot video, and project it on a big screen, but without the menus and what-not: ie full screen. I've hooked up my camera via firewire, and am using Quicktime, but it doesn't let me select View:Full screen.
View 1 Replies View RelatedI wanted to know whats a good software for recording desktop screen for tutorial purposes?
View 4 Replies View RelatedIs it possible to somehow capture a screen from iMac 27-inch and while it is used as external display (display for Xbox 360 - I have Kanex XD HDMI converter)?
View 2 Replies View RelatedI have no audio with all video files.
Info:
iMac, Mac OS X (10.7.3)
my question is about the display port and optical audio. This both devices has the same quality? if not, why the MACs doesn't have the optical audio?
View 1 Replies View RelatedHow do I capture video and audio from a mini DV camcorder to my iMac?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.6.8)
I would like to connect my Imac to my home entertainment system.I have the late 2009 21.5" model.If I get a mini display port to HDMI adapter will that run both audio and video for me or do I have to run seperate audio?
Info:
iMac, Mac OS X (10.7.3)
I want to convert some video files (specifically swf in this case) to audio files so I can listen on my iPod. I looked everywhere and can't find some free software that does that. There are tons that have trial periods with lots of limitations (like it won't convert anything larger than a 5k size file) so I don't want those because I won't know if the thing works well unless I pay for it. I'm not opposed to paying for a converter IF I know it works awesome on a Mac.
View 3 Replies View RelatedI listen to and watch a lot of podcasts. Quite often, after I am done listening to a Audio Podcast I will watch a video podcast. Some times it gets stuck and won't play the video but plays audio fine. Anyone else have this problem?
View 1 Replies View RelatedI subscribe to a couple video Podcasts, but don't view them often. But one popped up that looked interesting so I tried and only got the audio.The video window did not open.I checked an older video that came with a purchased album and again, the sound played but the video did not open. No Video just Audio. I'm running iTunes 10.6.1 Lion 10.7.3
PowerBook 2.3 GHz Intel Core i7
