Hardware :: Using Airport Extreme With DSL Modem - PPOE Settings
Feb 18, 2009
OK, so after several hours of swearing and cursing, i have my new airport extreme sitting behind my dsl modem now working and connected to the internet.
With my older linksys router, I had the dsl modem set to 'bridge' PPP location mode. That didn't work with the airport extreme it seems and nor did having the PPP on the modem. So, i selected 'PPP on the computer' PPP location mode and that seemed to do the trick.
So, question is -
- why doesn't 'bridge' mode work with the apple extreme? does it, and i'm not doing it right?
- is 'ppp on the computer' ok and any reason to not want this - any degradation in network performance etc?
View 1 Replies
ADVERTISEMENT
Nov 27, 2010
I am going to buy a new wireless and modem etc. I have been reading until im blue in the face now and keep swapping from the Billion to Draytek etc. I want top quality as this has to supply my business etc. My netgear has now just about given up so I am replacing everything. I have now settled on this and wanted any more input on my choices:
Airport Extreme current generation refurb from Apple store
Draytek Vigor 120 Modem
BT i-plate
New filters
I use mainly Apple gear so that is why I have eventually decided on the Airport.
I dont really need fancy features just good signal and great wireless range (have thick walls)..
View 1 Replies
View Related
Nov 28, 2010
I have At&t DSL, just got it a few weeks back, but have had to continue using my old internet because I cannot setup my Airport Extreme with it. I am really confused on the setting that need to be in place.
Here is the info that I have seen and tried:
Connection type on the Airport should be normal ethernet.
Setup the modem with "Bridge Mode", that is the problem right there.
View 3 Replies
View Related
Mar 5, 2009
I want to upgrade wifi network, and considering new Airport Extreme. Will run 2 MacBooks, G4 Powerbook and 2 PCs, as well as iPhone, PSP, etc. Currently use Netgear Rangemax DG834PN Modem/Router.
Should I use the Netgear box as DSL modem for Airport Extreme (it is 802.11 b/g), or get a new modem?
View 9 Replies
View Related
Dec 1, 2010
Upon getting my iPad and being unable to stream much without huge wait times, I've decided to take the plunge and get an Airport Extreme. Well, it arrived today, but alas it seems that I need a modem and Ethernet cord! Now, in my defense, I've been using a router that is both a modem and a router for years -- and it connected straight to the cable jack, so I didn't know that most routers needed a separate modem unit and Ethernet cord! Any way, it's too late to head out now so I'm going to have to wait till tomorrow to stream my precious netflix -- but I want to get it right this time; so...
I need an ethernet cord to connect the router and modem, right? The Modem/Router I've been using is called the SBG900 Wireless Surfboard Gateway. In my experience, the speeds have been dismal, but I should be able to use this as my modem -- right? Will it be slower than if I bought a separate modem? Does the modem even effect the speed of your internet or is that just the router?
View 6 Replies
View Related
Apr 21, 2009
What is Airport Extreme? Can I use it in conjunction with my existing modem / router and share it with my internet connection?
View 10 Replies
View Related
May 10, 2009
For the last 3 years I have used a Speed Touch 330 USB Broadband modem supplied by my provider Pipex
Initially only one computer was served - Mac Mini
Since then the following computers have now arrived
2 Powerbooks
1 Ibook
1 Imac
There is now a requirement for wireless connection to the internet
I have acquired an Airport Extreme Wireless Base Station
This has a single WAN port for modem connection
Can the above modem be successfully be connected by some means
View 2 Replies
View Related
Aug 16, 2010
I'm using an airport extreme (latest firmware) with 10.6.3 on a mac pro and a macbook pro. The mac pro is wired the macbook pro is connected via wireless.
I constantly have signal drops. While the airport extreme seems to stay online (green light is sold) the cable modem always resets itself.
I can't figure out if this is because of my Optonline service or due to my router (airport extreme). Cablevision states nothing is wrong with my cable internet connection and the issue may be with the router. I've tried three different modems from them and they've supposedly checked everything (wires, signal, etc). I still think it has something to do with them. I'm hesitant to try DSL as it is slower (no fios here yet).
I don't get how it can be the router if both my desktop and laptop lose connection to the internet at the same time if they happen to be connected online at the same time.
Is there anything I'm overlooking in regards to the airport extreme? Should I trash a particular preference or try a different setting?
I'm kind of desperate at this point since it is highly annoying to constantly get knocked offline more than 5 times a day.
View 7 Replies
View Related
Sep 27, 2010
i know Internet Service Providers give away modem or routers these day but wouldn't be best if Apple made an Airport Extreme or Time Capsule with a built-in modems? if you check people questions on apple.com you will see have half of them want to know how to switch off the wireless connection on their Linksys and let Airport Extreme do that and the other half doesn't even know what Airport Extreme is for i know Apple has a habit of getting rid of stuff but anyone else agree this will drive Airport Extreme sales up? it would be the ultimate connection device for macs and no need for additional router.
View 15 Replies
View Related
Jan 27, 2009
I've just moved and have had to switch ISPs. I have DSL service and the only modem option my ISP provides is an all-in-one modem/Wi-Fi router. I have an AirPort Extreme that I would like to use, but with this setup, unfortunately, I have to put it behind the modem/router.
I've used the AirPort Extreme both wirelessly and via Ethernet, and it is noticeably slow in connecting to Web sites. My browser often gets stuck on "Looking up [URL]" or "Connecting to [URL]" when it's plugged into the AE via Ethernet. When I plug directly into the DSL modem/router, sites are connected to and loaded immediately. The problem only exists when plugged into the AE. (Strangely, speed tests show that the AE downloads at nearly the same speed as the DSL modem/router, but this doesn't account for the noticeable delay in connecting to and the initial loading of Web pages).
View 5 Replies
View Related
Feb 10, 2009
I am finally jumping on the WiFi bandwagon at home - I know my macs pretty well but need advice at this wireless stuff...
1) I currently have a broadband modem that came with my BT broadband account - am I right I do not need to change this - just add an airport extreme/express to it?
2) What should I be considering when I am choosing between express/extreme? is extreme just longer range? I live in a 2 bed flat on 1 floor..
3) I would like to add some storage to this airport so I can store my itunes music on it and have it accessible to my laptop when I come in the house with it - I see airport extreme has a usb port - but is this USB2? if only usb1 then that would be very slow - what's the best way of adding wireless network storage (something like a firewire/usb2 drive like the drobo) to my wireless network?
4) - I am thinking about getting an apple tv - does extreme/express decision make any difference in this regard?
5) - If I want to run itunes through my main stereo - do I need to get a separate airport express for that? (Stereo and broadband modem are in different rooms in the flat) and does my laptop then work as itunes server, sending music from the storage attached to the airport extreme, to the express attached to the stereo?
6) - I see many people use a mac mini in systems like this - what are the advantages of having a separate mac mini added to the system to act as a media server as opposed to just using my laptop?
7) - If am am attaching media storage to a WiFi network - how do I make sure it is secure?
View 11 Replies
View Related
Feb 15, 2009
I currently have Qwest DSL and have the 2wire 2700 hg modem. I have attached the picture of it. I currently have a Windows XP computer that is now a 2 1/2 year old computer (blah it was a hand me down). The Windows XP PC is currently hard-wired to the modem. I now have the 802.11n version of the AEBS. This is going to be used for my current Macbook. I have an office downstairs so I will be doing wirelessly. I want to use the 802.11n only option with my Macbook. Also another reason I want to disable the 2wire built in wireless feature and have it replaced by the AEBS is because Qwest is not doing anymore firmware upgrades for the 2wire 2700HG modem. By the way, my family sometimes visit and use 802.11g only on the devices they use. I know AEBS supports that. I just hope 2wire wireless feature can be disabled without no issues. These are the things I am wondering:
1. Has anybody run a similar setup to mine? Any things I should consider? Any pros or cons?
2. Should I turn off the 2wire modem firewall and turn on the firewall option on the Airport Extreme base station or vice versa?
3. Should I leave alone the NAT feature on the modem be left alone?
4. Does this kind of setup have to be run in "bridged" mode?
That's all the questions I have for now. I hope someone can help with this. I looked and looked for a similar question to these questions but could not find a recent forum post to mine.
View 2 Replies
View Related
Feb 15, 2012
Just downloaded Lion, now the Airport wireless router keeps dropping the cable modem settings so I can't access the network, internet or WiFi. I have to repeatedly go back into System Preferences, Network, Assist Me, Network Diagnostics, choose the network port config, select WiFi, select my network and it restores all network settings and says "Internet connection appears to working correctly." This problem apparently happens whenever the computer goes to standby/sleep.
Info:
iMac, Mac OS X (10.7.2)
View 1 Replies
View Related
Jan 19, 2010
I've owned a Netgear and a D-Link route before and with those, you could access all your router settings and statuses over the internet. The Login would usuallly be the ip address and the password would be one of your choice. I can't seem to find any settings to enable this on my Airport Extreme.
View 2 Replies
View Related
Feb 18, 2010
I need up figure out how to set up forwarding for a few programs I use, however, the Mac I'm using at the moment will be replaced soon with a new one. So I'd like to know if port forwarding settings are saved on the Airport Extreme or the Mac connected to it. If it's saved on the Mac, then I would just wait till I get my replacement to set up port forwarding.
View 6 Replies
View Related
Aug 27, 2010
I just purchased an Airport Extreme (802.11n) to replace my old Linksys router (so that I can have wifi). After I have everything installed, I went to Symantec's Security Check page and ShieldsUP! page to make sure my connection is secure.
[URL]
To my horror, Symantec says that one of my ports is OPEN (ICMP Ping), while all others are CLOSED. In my limited understanding, this is definitely not the most desirable situation--not as good as my old Linksys, whose ports are all reported as STEALTH. ShieldsUP! just said that I failed because of the open ICMP port.
My questions are:
1. Is this the best Airport Extreme can do?
2. Am I safe?
3. Can I change any settings to make my network more secure?
I can't find much info from Apples' documentation and the Support website.
View 2 Replies
View Related
Sep 7, 2009
I'm using the Assistant to try to add a USB modem to my network settings. However, the option for "I use a telephone modem to dial my ISP" can't be selected. (please see attached screen grab). I've tried this under Tiger (10.4), Leopard (10.5) and, Snow Leopard (10.6). No luck in any of the last three Mac OS's.
View 1 Replies
View Related
Nov 1, 2009
Am using macbook aluminum 2gb ram,2ghz,core 2 duo with leopard 10 5.8,I use to connect my phone nokia e63 with Bluetooth and use it as modem to brows on my laptop. But it suddenly stop working, like when use the process of setting up a Bluetooth device and when it get to the point of editing APN or adding IP address it will not allow me like before.I?v different phones (like sony ericson)every other brand still work except nokia phones which use to work perfectly well before, am confuse cos I don?t wanna format my system.i,v been doing this for long now,I strongly believe it could be a sign of virus infection?
View 1 Replies
View Related
Mar 3, 2009
Simple question: Of the new features in the new AirPort Extreme Base Station, which of these could become available to the old AirPort Extreme Base Station via a software/firmware update? I have to think that at least some of the new features don't actually require new hardware. Just trying to figure out if I want to shell out $179 for a new AEBS when my current AEBS works pretty well as it is.
View 21 Replies
View Related
Feb 23, 2010
I just got a time capsule and replaced my extreme with it then added my 2 expresses to the network. Was getting 28-33mbps download speeds using speedtest.net to test now i'm getting only 4-6mbps. WTH!!! Also the transfer rate for backing up my macbook to the tc drive is ridiculous!!!
View 2 Replies
View Related
Apr 25, 2010
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
View 1 Replies
View Related
Feb 12, 2012
I have previously time machine backups for two macbook pros on same drive. However, I connect the drive to the airport extreme and although I see the drives and the backups, I can not access the files over Airport Extreme.
Info:MAC Book Pro, Mac OS X (10.6.4)
View 1 Replies
View Related
Jan 29, 2009
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies
View Related
Mar 14, 2009
This might seem an odd question but I had to replace my last Airport Extreme base station as it was faulty....I've now got the newer "Dual Band Extreme Base Station". I want to avoid any conflicts with my old settings for my wireless network with my MBP. Should I uninstall the last version of Airport Utility?Is there anything else anyone would recommend before i install or connect the new hardware/software?
View 2 Replies
View Related
Oct 11, 2009
Can it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
View 4 Replies
View Related
Jun 15, 2012
The latest upgrade of AIrport Utility doesn't support my Airport extreme, but the old version 5.6.1 says it doesn't work in Lion. How was I managing my Airport before th 6 update? What do I do now? Will I have to get a new Airport?
I have DSL service. I have an iPod Touch and an iPad 1 that I'm trying to connect. I just upgraded both iDevices to iOS5. I've been having trouble keeping an internet connection live for them, but now I can't even get the wi-fi to connect.
Info:
AirPort Extreme, Mac OS X (10.7.4)
View 4 Replies
View Related
Sep 11, 2014
Just bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router. Â
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.Â
Info:
Airport Extreme
View 1 Replies
View Related
Sep 5, 2010
I just purchased an Airport Extreme 802.11a/b/g/n to use as my home wifi router. I have two Airport Expresses 802.11b/g. I want to use one for Airtunes to my stereo and another for wireless printing.
View 1 Replies
View Related
Mar 9, 2010
I currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
View 1 Replies
View Related
Jul 9, 2010
I have a Macbook (white unibody) running Snow Leopard. I have a personal wireless network using an Airport Extreme and I have an external hard drive (WD) connected to the Airport Extreme. I use this hard drive for my Time Machine Back ups.
I just got back from a trip and tried to back up my time machine. I got the error that the back up disk is not available. I then tried to open the airport utilities.
It tells me that "Airport Utilities is unable to find any Airport Wireless devices". I find this doubly strange because I have no problem connecting to the internet on this wireless network which supposedly does not exist.
View 1 Replies
View Related
