I've owned a Netgear and a D-Link route before and with those, you could access all your router settings and statuses over the internet. The Login would usuallly be the ip address and the password would be one of your choice. I can't seem to find any settings to enable this on my Airport Extreme.
View 2 RepliesI've just moved and have had to switch ISPs. I have DSL service and the only modem option my ISP provides is an all-in-one modem/Wi-Fi router. I have an AirPort Extreme that I would like to use, but with this setup, unfortunately, I have to put it behind the modem/router.
I've used the AirPort Extreme both wirelessly and via Ethernet, and it is noticeably slow in connecting to Web sites. My browser often gets stuck on "Looking up [URL]" or "Connecting to [URL]" when it's plugged into the AE via Ethernet. When I plug directly into the DSL modem/router, sites are connected to and loaded immediately. The problem only exists when plugged into the AE. (Strangely, speed tests show that the AE downloads at nearly the same speed as the DSL modem/router, but this doesn't account for the noticeable delay in connecting to and the initial loading of Web pages).
I hope the mac folks can lend a guy a hand. I have the latest AE and it runs great with a shared HD between Vista PC and my Macs. My ISP is dynamic so I'm using dyndns.org. Since I don't really want to leave a computer on 24-7 (for the dyndns updates) I have a linksys router take the feed from the cable modem. AE is in bridged mode. All disks and wireless is flawless. I can access my webcams via the static ip from dyndns, route it to linksys then to camera. But I can't figure out how or what to do to get access to my shared drivers over the net. I researched for a couple hours today and came up with a few people who did it (maybe they didn't have a leading router like me) but they didn't leave enough clues, details or links to research it some more. Apple online support is slim and I'm clueless on Bonjour configs.
View 6 Replies View RelatedI have an older cable modem running Comcast's service connected to the newest AirPort Extreme in my current setup. My computer is a 13.3" MacBook Pro with all of the latest software updates. With all of that said, I'm having problems with having webpages hang, dropped audio on streams and constant re-buffering of video. Strangely enough, my signal is always at full strength no matter how far away I am from the AirPort. Until a few days ago I was using a Linksys WRT54GL with DD-WRT firmware with absolutely no troubles at all, but things have gone to hell with this new router. I've rebooted my modem and AirPort and I've browsed through the settings without finding any solutions yet. I've tried 5Ghz mode, I've tried being inches away from the AirPort and I've tried going to 802.11g with no improvements. Does anyone have an idea about what is going on?
View 1 Replies View RelatedI have read the threads about my accessing the USB drive on my Airport Extreme via an AFP connection...and it works. Without a hitch. BUT I would like to allow others (who are not on my home network) to access this same drive (with some level of security). Is THAT possible and if so, how? I have 2 partitions on this HD, one is a mac-formatted partition and the other is a FAT32 for PC user access. Or course, each partition has a unique name so, depending on the user, they would access either the Mac or PC formatted partition. BTW, I did some thread-checking but all seem to find are one's that show how to I can make a connection to my own drives away from the home, NOT someone who is not associated with my home network to make the same connection to the USB drive on my APE.
View 3 Replies View RelatedWould like to set up old computer to airport extreme wireless network. Purchased a usb adapter.
View 10 Replies View RelatedJust how do I connect a G4 to an Airport Extreme Base station via LAN cable, and then get it to connect to an existing wireless network (that's using a non Mac router). It's just that the existing airport card is painfully slow with a NAS and as I had the AE kicking about I thought I'd use that rather than buying a new PCI AE card.
View 5 Replies View RelatedJust got my wireless router (base extreme) connected. There is no problem with connection to my HP netbook and internet works. However, there is no internet connection with my compaq presario notebook but wireless is connected. Does anyone know how i can connect to internet on PC?
View 2 Replies View RelatedI have an old Belkin pre-N router and Virgin internet.
I am considering getting a new router and was wondering what people think about the airport extreme versus others, specifically the Netgear N300 dual band routers, such as the WNDR3700? Both are about the same price.
I have 3 Macbook Pros and an old Windows xp computer and my mac pro currently on our home network, with my mac pro on the ethernet cable and the rest on wireless.
Is the range on the airport extreme good for outdoors as well as going through walls to upstairs?
I am sorry, whats the difference?
View 1 Replies View RelatedOK I know this can be done and have searched many forums and I cannot find the whole walk through on the process!!!
I have the Airport Extreme one version back without the dual antennas and I'm trying to make up for that with my old linksys router. I want my airport extreme to transmit wireless N only! and my linksys to transmit wireless G only!! configuration setting to make this happen??
What is Airport Extreme? Can I use it in conjunction with my existing modem / router and share it with my internet connection?
View 10 Replies View RelatedHow do I use my AirPort Extreme base station with my FIOS Router to extend my network? I have hard disks connected to my AirPort Extreme and would like to access them.
Info:
MacBook, Mac OS X (10.7.4)
Just bought an Airport Extreme from Apple. Is there anyway I can use it instead of my existing netopia router.
I'm getting mixed reports on whether I can do it. The AEBS appears to be able to take a dsl line.
Does anyone out there is able to guide me thru the step on setting up a 2Wire all-in-one router with the AirPort Extreme base station? I was reading from somewhere, they were saying like i need to bridge the 2 router together or something.
View 2 Replies View RelatedJust bought an Airport Extreme from Apple. Is there anyway I can use it instead of my existing netopia router.
I'm getting mixed reports on whether I can do it. The AEBS appears to be able to take a dsl line.
i've just got my sister a emac G4 1ghz i installed the airport extreme card from my G5 cos she wants it in her bedroom but it's not connecting to the router, my router is a Thomson TG585 V7 i never had this problem with old airport, it only seems to be with extreme although the card was connecting to the network from my g5 was basically inches away from it, the Emac is on the floor about 2ft away i goto connect and it just keeps timing out, i've made sure the wpa key is correct and even tried manually entering the network config details but to no avail, is there any hope?
View 2 Replies View RelatedI just bought an AE and replaced my older Linksys with SpeedStep router and for some reason the internet seems slower.I did a speed test to compare with my older system and it's night and day how much slower it is now.
With the Linksys I was getting from 10-15Mbits download.With the AE I'm just tested and got 700KB down Anyone have a clue as what I can do to speed it up?By the way, the AE is connected directly to my desktop by ethernet cable.
I have an older MacPro 2006 model. I need a WiFi card for it. I want to know which one to get. Says a 802.11g AirPort Extreme will work. But is that only for Airport routers or can I use it with my Netgear router? Does it matter?
View 1 Replies View RelatedI was reading through this old "Airport Extreme 2010" thread, but didn't see a discussion around 2011 yet - so I thought I'd start one.
I might have missed the news, but we never did end up getting a new version of Airport Extreme last year, right? So do you think the odds are good we'll get a new Extreme in 2011?
What's your best guess at a release date? Possibly around March 2011?
What new features would you expect a 2011 AEBS model to have? What upgrades would you like to see? Minor spec bumps? Stronger/wider range? More...?
Since Saturday I've been having trouble connecting to the internet. For the last 18 months we've been connected to my Airport Extreme Base Station (2003) which in turn is wired to a Motorola SB5101 cable modem. Every time I had called the ISP (Comcast), they've been able to get it going while I was on the line by restarting the modem (which I tried before calling). Last night nothing would work no matter how many times I rebooted the modem and after many trial and errors, we were able to get connected to the internet by hooking my MBP directly to the ethernet cable from the modem and taking the Airport out of the equation. The service rep decided my router was likely at fault and I wasn't inclined to argue as it is an old router and things do break over time.
However, I ran out and bought a brand new Belkin Share wireless router and now neither that nor the Airport can connect to the internet even when the lights on the modem say all is well. Unfortunately, the Belkin came with it's own software package for router management and setup, which I'm not too keen on. It kept saying it couldn't connect to the modem or that the internet connection to the modem was lost. In tonight's efforts, I'm always able to plug my MBP right into the modem and get a connection, but as soon as I move that cable to the Airport or the new Belkin, my internet is gone. The Airport connection in the Network section of System Preferences always comes up as connected, but the Belkin glows dark red instead of green and the accompanying software says no connection to the internet can be found.
Does this sound more like the fault of the modem, the ISP, or me, the user? Any help would be much appreciated. Although I am able to connect now, my roommate's computer doesn't even have an ethernet port.
Connecting a router to Airport Extreme: Will it slow down the internet access to all the computers more? I wanna hook up my Mac Pro, iMac via Ethernet and my PowerBook will be wireless. Is it gonna effect my speed?
View 12 Replies View RelatedI am looking for an individual who can spend some time to carefully take me through the steps of piggybacking my Apple router off of my new Verizon router (pictured above).
I realize some of the process is discussed earlier in this thread but I found some of it difficult to follow, and I think I may have a newer Verizon router than what may have been previously discussed.
There are also some functions of this Verizon router that I cannot have disabled.
Will talk about all of that below...
To Begin With
I switched from DirecTV to Verizon Fios this past week.
The tech who came to my home told me that I would need one of their routers if I wanted the DATA (channel
text information) transmitted to all the displays in my home.
This would mean, of course, my Airport Extreme Router would have to go.
Since switching to the Verizon MI424WR router, my Wifi signal at far ends of the
house constantly goes up and down. This was never a problem with the Apple router.
Need to Piggyback the Apple Router but not disable critical Verizon Functions
I need my Apple Airport Extreme router back.
Problem is, the Verizon router provides critical data information to all my displays. So,
hopefully there is a method that I can piggyback the Apple Router and turn off the Verizon
WiFi function without affecting its data transmission to the other televisions.
I am having since few weeks problem with my iMac loosing connection with my wifi airport extreme, my MacBook pro, iPhone and iPad is staying looked perfect with my wifi..I Mac is loosing connection, no indication anymore on my top window on my desktop. I need to go to system preferenties, open network and selecting again my wifi network..All fine for certain period of time ( 15 minutes) and i need to do THE Same thing..As all THE rest is werking fine, is this setting Or hardware problem in my iMac
Info:
iMac, Mac OS X (10.7)
I am looking to get a AirPort Extreme base station and use the dual radio modes. However, there are some peripherals like printers and game consoles that will not run on the 5 GHz band. Could anybody please tell me if the router allows sharing between both bands or just in each individual band?
View 3 Replies View RelatedI've lived in an apartment for the past year that is connected directly to our university network. I have an airport extreme router that I've tried to set up responsibly with no SSID broadcast, WPA2 with extremely difficult password, transmission power set to 25% etc. It has also been set to 'share a public IP address" and everything has so far worked smoothly.
Recently, however, all apartments in the complex received letters saying that there had been disruptions on the network and that it was most likely due to wifi routers -- which are NOT permitted. If we temporarily disregard that ban, is it possible that my router is causing any disruption? And, if so, what could I do differently to ensure that it does not?
I've tried setting it to bridge mode, but that does not work at all. We are allowed to register 10 mac addresses and I have registered all my devices, but in bridge mode none of them can connect . As I understand it, in bridge mode the university servers are distributing IP addresses to devices that are registered on the network -- is that correct? Then what could be the reason for bridge mode not working if my devices were registered properly?
My main question is whether my router could be causing problems with the above setup?
Is there a way to set my Apple Airport Extreme router to block certain Google Talk buddies on my home network? Or do you know of a way this could be done any alternate way?
View 1 Replies View RelatedMy router is giving me troubles all of a sudden. It's been flashing the yellow/amber light and I cannot connect to the internet anymore through it.
I've unplugged it and used a different ethernet cable through it, but it still won't connect.
However, my internet does work when I directly plug the ethernet cable into the back of my Mac. So it's not my ISP, which makes me think it's the router.
My AEBS is no more than 6-8 months old, and this is the first time I can't seem to fix it. Usually unpluging it and turning it off and back on will work.
Just downloaded Lion, now the Airport wireless router keeps dropping the cable modem settings so I can't access the network, internet or WiFi. I have to repeatedly go back into System Preferences, Network, Assist Me, Network Diagnostics, choose the network port config, select WiFi, select my network and it restores all network settings and says "Internet connection appears to working correctly." This problem apparently happens whenever the computer goes to standby/sleep.
Info:
iMac, Mac OS X (10.7.2)
OK, so after several hours of swearing and cursing, i have my new airport extreme sitting behind my dsl modem now working and connected to the internet.
With my older linksys router, I had the dsl modem set to 'bridge' PPP location mode. That didn't work with the airport extreme it seems and nor did having the PPP on the modem. So, i selected 'PPP on the computer' PPP location mode and that seemed to do the trick.
So, question is -
- why doesn't 'bridge' mode work with the apple extreme? does it, and i'm not doing it right?
- is 'ppp on the computer' ok and any reason to not want this - any degradation in network performance etc?
