I can no longer print from my maac to my epson. By either USB connection or wifi. It just won't connect and all I did was move house.
Info:
MacBook Pro, OS X Mountain Lion (10.8.5)
I have had difficulty in attaching my HP Photosmart C5580 printer to my new MacBookPro (OSX 10.6) through my Netgear WGPS606 print server. After much searching I found previous posts here which advised me to add the Gutenprint driver 5.2.6 which I did. That finally DID successfully attach the printer through the server.
However, there is a lag of many seconds (sometimes minutes) between the SEND command and the starting of the printer. Is this the new normal that I need to expect or is there a fix?
Has anyone been able to print to CD's on Epson r320 when I try to print to the CD tray, I get an error message saying the CD tray is open and the job is automatically stopped. I found the new printer drivers for Intel machines on Epson's site and installed them. and even up dated the drivers by apple.com site . but it just keeps giving the same error and in the choose media type box , it wouldnt allow my to choose dvd/cd.
View 4 Replies View RelatedEpson Stylus NX515 appears to be connected to network, WiFi light is on but it doesn't show up in the Mac's printers list.
View 1 Replies View RelatedI constantly loss connection to my wifi home connection, have to turn off an on the wifi on my macbook pro (10.7.4)
Info:MacBookPro, Mac OS X (10.7.4)
Last night, when I tried to print a document in Acrobat on my Epson 2200, I got a notice to the effect that new software was required for the 2200, and did I want to download it. Feeling comfortable that I was dealing with an Apple installation, I approved the install. Now I cannot print anything on my Epson 2200. Every print attempt fails. I have reinstalled the print driver, tried another driver (Gutenprint), but can't get anything to work.I'm running Lion 10.7.4 on an iMac with 4 Gb of RAM.Â
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.4), 4 GB RAM
I recently got a new (used) mini and now can't seem to print. The printer shows up when the printer window opens, but the printer just doesn't respond. I checked the wiring. It is connected by USB. I also looked for a new printer driver for this model, but can't find one that works with this OS
Info:Mac mini, Mac OS X (10.7.4)
Epson 835 is only printing in B&W since I updated to yosemite. I recently did the update as well.Â
Info:
MacBook Air, OS X Yosemite (10.10.1), can't print in color
I have an Intel Mac Mini
I've just tried to install the epson drivers for my printer Epson Stylus Photo R220, went to their site and downloded the driver, installed and resarted.
Then installed the Epson Print CD application that comes with the CD, and installed, however when i try to print to CD an error states:
"The epson print driver dealing with CD printing is not installed"
I've looked on the CD and on their site and cannot find anything.
I have an Epson Artisan 800 printer but I can not get my MacBook Pro to print to it with Bluetooth. I get the following error: [URL]
View 8 Replies View RelatedI am trying to find a print server that works with the epson sx200 all in printerThe netgear ps121v2 looks OK however netgear do not list the printer as being supported same is for the d-link server.Epson only recommend there own server at �140 mmmm !!!!As any body tried the netgear or d-link with this printerPS I only have one printer which I want to share with my imac and macbook pro via a netgear wireless router
View 8 Replies View RelatedI just got the Epson workforce 615 and after hours of trying to connect this printer to my airport I give up....
Does anyone have step by step instructions on how to do this?It just does not want to connect to my airport network no matter what I do. I have downloaded all the drivers/software off the epson site to no avail.
I've been at this all nite and I am fed up. Can someone please tell me how I can print a panoramic print on roll paper using CS2 on a MAC (so please now windows advice) using an epson pro 4000? I constantly get the message that the wrong paper source is selected. Roll paper is fed into the printer, I select A2 roll paper (any of the A2 roll paper options), or I try a custom paper size (42x120 cm) on page setup. For paper I select velvet fine art paper (I don't really know what kind of paper it is to be honest), because that will select the rear feed. Unless I am mistaken (quite possible) the rear feed is used by roll paper.This does not work. I tried setting to A2, but then I get only an A2 size part of my print, and still it won't print anyway with the same annoying message. I don't have these problems with my R1800. With the R1800 I just select roll paper and everything automatically prints perfect, but not the pro 4000, can someone please explain to me what settings I have to use in page setup of CS2 and what settings I have to use in the printer driver of the pro 4000 printer ?
View 1 Replies View RelatedI am on OS 10.3.9. My Epson Stylus CX4600 will not print a Word document from this computer. It will prints a document from my older laptop, which has OS 9. And it will make copies when it is plugged into the OS 10.3.9. It will even print a test pattern when the utilities function is open. But it will not print an image or a Word doc or an Appleworks doc that is stored on the OS 10.3.9.
View 1 Replies View RelatedI have upgraded my soft ware to Snow leopard and now my almost brand new Epson SX 515W copier printer and scanner will not print. Massage Error:/ System/ Library/ Pri always appears.  have ried down loading also disinstalled printer and reinstalled. Â
View 3 Replies View RelatedI am trying to print in 'draft mode' with my Epson xp 215 and I can't find this option under 'Media Quality'.
Does the printer misses this option or is it something with the apple software.
For the rest it works really fine.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
Well, after sitting on the snow leopard fence for a while, I decided to install it this weekend. I now am unable to print to my Epson Artison 800 printer. Apparently I need a Driver for it, but the Epson site is a bit confusing when trying to select exactly what I need to download.
View 3 Replies View Relatedi have a time capsule and i conect a epson nx100 to usb port to print wireless, the printer work perfec when i use it via my usb port (i have a macbook air), but i cant prinr via time capsule, i dont have any error mesagge, when i open the control panel of the printer it says that the printer is ok, all the jobs said are completed.
View 1 Replies View RelatedI purchased an Epson Stylus NX530 printer with wireless capability. I have a MacBook Pro running OSX v10.7. My printer is installed and works as expected when connected via USB cord but printer shows up offline when USB is disconnected. I connected my printer to my wireless network through my router (entering name of connection and passcode) and enabled the sharing capabiliy in System Preferences. So my setup is that I connected my MacBook to my router and my printer to the router. Is there anything else I am missing? Would connecting both the computer and printer to the wireless router be all I shoud need to do to be able to print wirelessly? Is my wirelss router considered my "network?" If my printer has a wireless internet connection, should I be able to "view" it anywhere on my MacBook other than printer settings when it is not connected via USB (I had to initially connect my computer via USB to the printer during setup).Â
Info:
MacBook Pro, Mac OS X (10.6.8)
After installing OS 10.7.3 my printer Epson Stylus DX8450 give no connection
Info:
iMac, Mac OS X (10.7.3), Printer Epson Stylus DX8450
I have documents that were created using colors for the text that I find difficult to read. They also print in those colors.Â
I have followedEpson's instructions to set the NX400 to print black ink only. The printer still prints in color. Possibly, Epson's drivers don't work, Or possiby, something in Lion OS is overriding the drivers.Â
Is there some setting in Lion OS that overrides the printer drivers? Is it not possible to print black ink only?Â
Info:
iMac, Mac OS X (10.6.8)
I upgraded to Lion and although I can still use my Epson Photo R380 as a paper printer, the Epson Print CD is not functioning (It's says for Power PCs). It seems Epson has not updated that software yet, if ever. I need to print on my CDs with the Epson printer. I have tried the Magic Mouse software. Does not work either...
View 2 Replies View RelatedI have an Epson SX515w printer and can't find any software on Epson that lets me set non standard print sizes. From my PC Laptop I can print all Avery sizes as well as any size I want. I want to print images to fit into small square frames.
Info:
iMac
My epson workforce 845 printer stopped printing. When I go to print it says printer in use. I have uninstalled and reinstalled the drivers. I still have error.Â
View 1 Replies View RelatedI have a Time Capsule wirelessly connected to my iMac. Since I've encountered some problems with backups because of intermittent wifi connection failures, I want to switch to a wired connection with an ethernet cable. I know I could fiddle with the wifi channels etc. but since the TC is just sitting next to my iMac anyway, I could profit from the higher bandwidth of a wired connection as well.Two questions:
1. What exactly do I have to do to make the switch? Are there any new settings I have to apply? Create a new network?
2. Will I still be able to use the wifi connection to get on the internet using my smartphone?
I have MacBook OsX 10.5.6. Had a direct printer connection but recently decided to hook up my Epson R1800 stylus photo printer through TC. I removed the old default printer and added it through System Preferences-> Print and Fax. It is recognized as a Time Capsule Printer, bonjour kind.
But when I press print i get for 2 seconds window saying that page is printing but printer queue is empty and nothing happens. It feels almost as if printer is not hooked up. I can not locate this printer on Epson Utility (separate software) either. Does anyone have or had in the past similar problem?
Epson 4800 print perfectly on direct USB connection to MacBook Pro with the 9.17 Epson driver, but when connected to USB port on the Time Capsule, there is red sign and notice that the printer is unconnected. Both the port of the Time Capsule and the cabel are OK, as I print with them to Epson SP R800 without any issue...Â
Time Capsule is correctly recognised on the local WiFi and set with correct password. USB port is working for other printers correctly. Just the 4800 is not recognised. I tried everything (deleting the printer and reseting all printers too)...Â
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.3)
double sided printing on mac. Since I changed to a mac, I havent been able to print double sided from my epson sx425w printer. This can be quite annoying if you a lot of pages to print. The double sided print option is just disabled so I cant even select it and I dont have the option of "Duplexer" or "Duplex Printing" as suggested in other posts. Besides, I've not been able to use my scanner since upgrading to Mavericks-I know others have had similar problems too.
View 2 Replies View RelatedI have a Apple mac and currently my Epson deskjet printer is connected to it via usb cable.My wife and I both have Windows XP laptops and I would like to know if it is possible to send word documents to the printer over the home wifi network.This would save having to take the usb connector out of the imac and plug it into the laptop, also the imac drives the Epson so much better than the HP laptop my wife uses.Then just to be brave is it possible to print documents directly from my iphone for super braveness, my wife's blackberry.
Info:
iMac
I have an Epsom PX-V630 printer (a Japanese model) which comes with two types of connecting cable - one the standard USB and the other a scuzzi type with about 40 pins. The cable plug is labelled USB Printer Converter by-Direction. I can physically connect the printer to my Mac Mini (running Leopard) with this cable, but I get a "communication error" message when I try to print. Is it possible to use this port with Leopard so my wife can connect her PC (running Vista) to the printer's USB port? We were able to network the printer this way when I was running an older Mac with system 9.2.
View 4 Replies View Related