I am on OS 10.3.9. My Epson Stylus CX4600 will not print a Word document from this computer. It will prints a document from my older laptop, which has OS 9. And it will make copies when it is plugged into the OS 10.3.9. It will even print a test pattern when the utilities function is open. But it will not print an image or a Word doc or an Appleworks doc that is stored on the OS 10.3.9.
View 1 RepliesI purchased an Epson Stylus NX530 printer with wireless capability. I have a MacBook Pro running OSX v10.7. My printer is installed and works as expected when connected via USB cord but printer shows up offline when USB is disconnected. I connected my printer to my wireless network through my router (entering name of connection and passcode) and enabled the sharing capabiliy in System Preferences. So my setup is that I connected my MacBook to my router and my printer to the router. Is there anything else I am missing? Would connecting both the computer and printer to the wireless router be all I shoud need to do to be able to print wirelessly? Is my wirelss router considered my "network?" If my printer has a wireless internet connection, should I be able to "view" it anywhere on my MacBook other than printer settings when it is not connected via USB (I had to initially connect my computer via USB to the printer during setup).Â
Info:
MacBook Pro, Mac OS X (10.6.8)
After installing OS 10.7.3 my printer Epson Stylus DX8450 give no connection
Info:
iMac, Mac OS X (10.7.3), Printer Epson Stylus DX8450
I'm trying to print a .psd image from Photoshop CS5 using my Epson Photo Stylus 2400 printer. Yesterday, I downloaded a suggested upgrade and it hasn't worked since then. I used Time Machine and replaced the Epson utility with the old one. I then get a message:Â
Waiting for printer to become available...  and nothing happens. I need to be able to print!
I'm using Snow Leopard 10.6.8
Info:
iMac intel processor, Mac OS X (10.6.8), see above
I have an Epson Stylus CX3810 all in one. I can't figure out how to get it to scan. There is no scan button and when I open Image Capture it tells me there's nothing connected.
View 3 Replies View RelatedWhenever there is a software driver update via Apple for my Epson printer, I always update it. But, is it normal for one to delete and readd the printer to use the new driver? I notice my system says it's the old driver until I delete and readd..
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8), 15" 2.66 GHz Intel Core i7 4GB AG
I have the above printer connected to my iMac and it has been working flawlessly for months. I have one issue though. When the printer is running low on ink, the maintenance light blinks, indicating low levels. But, it doesnt tell what ink cartridge is low, and since i dot want to go all out and change them all, i need to know how to view levels. On my Mac, it only says information not available for supply levels, and as far as I know, there is no way to check on the printer itself. Does anybody know how to view the ink levels, either on the printer or my iMac?
View 7 Replies View RelatedI have a Epson Stylus C45 printer USB and It is not fully compatible with Mac OS X 4.4 specially ref. printing preferences, so I have searched over the internet and found a driver. I am able to choose only Standard, for example. Is there any other driver better than CUPS+Gutenprint v5.0.0-rc1?
View 3 Replies View RelatedMy Epson stylus Photo 890 has a fault. Both red and green lights continue to flash when the printer is switched on. The printer was working fine and then after starting a new batch of printing the above fault occured and now I cannot get the printer to work
View 3 Replies View RelatedI want to use an Epson Stylus BX635FWD all in one printer on my Mac Mini OS 10.6.8 are there any problems with drivers?
View 1 Replies View RelatedHow can I increase the printable area for my Epson stylus 890?? Especially the bottom margin is huge. I�m using Mac OSX 10.4.11.
View 1 Replies View RelatedI was given Epson Stylus NX420 3 in 1 printer with my MacBook Pro and would like to set it up but when I insert the disc it comes out. How do I go about downloading the disc to set up the printer?.
Info:MacBookPro, iOS 5.1
I have and old and useful printer -Epson Stylus Color 440- and just bougth a cable for connecting it to USB port. Add a new print on its Print and Scan Preference Panel and it was recognized inmediatly, but I was told there was not any driver to that printer. Â
Tried to set "Epson Stylus Color Series" on its driver but when I went to print, printer seemed to work but does not eject any ink. It seemed as if I were ran out of ink; its car moved over the places occupied by the photo and sounded as normal printing, but not a drop of ink. I checked on an older windows pc, and ink is full, printed normally. I also looked for its drivers on Epson pages, but it seems there are only available for previos Mac OSs, not for X.Â
A son told me that in his Snow Leopard MacBook White there's a dirver called "Epson Stylus Color 440 gutenprint" on his Print and Scan Driver Menu; haven't tried to print from his MacBook yet, and as I searched, those are open drivers.Â
I wonder if I can download and install that "Epson Stylus Color 440 gutenprint" from the web, of if there's a way to copy it from my son's Macbook, when he comes and check.
Info:
MacBook
Pro, Mac OS X (10.7.3)
I can't check ink levels on my epson stylus r320
Info:
MacBook Pro, Mac OS X (10.6.8)
I have two perfectly good printers, but the drivers for my MacBook Air are said to be unavailable on the epson site.Â
Info:
MacBook Air, Mac OS X (10.7.4), Epson Stylus CX3200 & CX42OO printe
Printing from any program, Two-Sided Printing on the print prompt screen is grayed out. There's no reason for this, as my desktop Windows does double-sided all the time. I've found a lot of discussions in the Leopard forum about this problem, but none of them used my system or my printer and I couldn't find similar solutions. I'm running 10.6.8., trying to print from Chrome specifically, wirelessly connected to my printer.Â
Info:
Macbook, Mac OS X (10.6.4)
Since I updated my Imac to snowleopard, there is no more printing on the good old epson stylusphoto1200 incjetprinter. even after downloading abaout 1 gigabyte (or 2) of Epson-drivers (from the apple-site) nothing works (" you need to update the software of your printer".. , but everything is updated on softweáre-update..)
Info:
epson incjetprinter, Mac OS X (10.6.8), stylus photo 1200
I bought my mac back in Feb. and I received a free printer along with it. The Epson all in one Stylus piece of ****. Well I shook the individual ink catridges well and installed them all. Since then I haven't been able to get a clear sheet of paper. All the colours look faded but the actual picture is not distorted. It's just the contrast of the colour thats gone. now is there a way I can alter the amount of ink my printer is using? I have tried aimlessly, looking for an option but I cannot find any.
View 5 Replies View RelatedAfter the last software update my printer wasn't recognizing ink cartridge. So I uninstalled its software. Now I can't find its drivers anywhere. Epson's website says check your Mac software updates and doesn't offer to download the driver directly. But there are no available updates for my computer as of now. How do I find and install the driver?
Info:
iMac, OS X Mavericks (10.9.4), Epson Stylus Photo R3000
How do you get the supply levels for the Epson Stylus Photo 1900 to appear in the printer utility window?
Info:
iMac, Mac OS X (10.7.2)
I have downloaded the most recent print driver download from Apple. The computer "recognizes" the printer, yet when I try to print anything I get a "Communication Error" message in the Printer window.
Info:
iMac, Mac OS X (10.7.2), new imac quad core
Last night, when I tried to print a document in Acrobat on my Epson 2200, I got a notice to the effect that new software was required for the 2200, and did I want to download it. Feeling comfortable that I was dealing with an Apple installation, I approved the install. Now I cannot print anything on my Epson 2200. Every print attempt fails. I have reinstalled the print driver, tried another driver (Gutenprint), but can't get anything to work.I'm running Lion 10.7.4 on an iMac with 4 Gb of RAM.Â
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.4), 4 GB RAM
I recently got a new (used) mini and now can't seem to print. The printer shows up when the printer window opens, but the printer just doesn't respond. I checked the wiring. It is connected by USB. I also looked for a new printer driver for this model, but can't find one that works with this OS
Info:Mac mini, Mac OS X (10.7.4)
Epson 835 is only printing in B&W since I updated to yosemite. I recently did the update as well.Â
Info:
MacBook Air, OS X Yosemite (10.10.1), can't print in color
I have an Intel Mac Mini
I've just tried to install the epson drivers for my printer Epson Stylus Photo R220, went to their site and downloded the driver, installed and resarted.
Then installed the Epson Print CD application that comes with the CD, and installed, however when i try to print to CD an error states:
"The epson print driver dealing with CD printing is not installed"
I've looked on the CD and on their site and cannot find anything.
I have an Epson Artisan 800 printer but I can not get my MacBook Pro to print to it with Bluetooth. I get the following error: [URL]
View 8 Replies View RelatedI am trying to find a print server that works with the epson sx200 all in printerThe netgear ps121v2 looks OK however netgear do not list the printer as being supported same is for the d-link server.Epson only recommend there own server at �140 mmmm !!!!As any body tried the netgear or d-link with this printerPS I only have one printer which I want to share with my imac and macbook pro via a netgear wireless router
View 8 Replies View RelatedI just got the Epson workforce 615 and after hours of trying to connect this printer to my airport I give up....
Does anyone have step by step instructions on how to do this?It just does not want to connect to my airport network no matter what I do. I have downloaded all the drivers/software off the epson site to no avail.
I've been at this all nite and I am fed up. Can someone please tell me how I can print a panoramic print on roll paper using CS2 on a MAC (so please now windows advice) using an epson pro 4000? I constantly get the message that the wrong paper source is selected. Roll paper is fed into the printer, I select A2 roll paper (any of the A2 roll paper options), or I try a custom paper size (42x120 cm) on page setup. For paper I select velvet fine art paper (I don't really know what kind of paper it is to be honest), because that will select the rear feed. Unless I am mistaken (quite possible) the rear feed is used by roll paper.This does not work. I tried setting to A2, but then I get only an A2 size part of my print, and still it won't print anyway with the same annoying message. I don't have these problems with my R1800. With the R1800 I just select roll paper and everything automatically prints perfect, but not the pro 4000, can someone please explain to me what settings I have to use in page setup of CS2 and what settings I have to use in the printer driver of the pro 4000 printer ?
View 1 Replies View RelatedI have upgraded my soft ware to Snow leopard and now my almost brand new Epson SX 515W copier printer and scanner will not print. Massage Error:/ System/ Library/ Pri always appears.  have ried down loading also disinstalled printer and reinstalled. Â
View 3 Replies View Related