Hardware :: HP Printer - Full Black Ink Cartridges
Nov 24, 2009
I think this is the correct forum to ask this. I have an HP Photosmart c3150 all-in-one printer that I am trying to get to work with my white g3 laptop (running system 10.4.11). I have downloaded the appropriate drivers and all however the printer won't print any black ink. It prints color fine, and it scans fine, it just won't print with the black ink cartridge. When printing text (all black) it goes through the motions of printing but he page is blank when it comes out. I can print in color, and it prints fine (but with the obvious lack of black tones). I also tried to print using a Canon pixma ip 1500 printer and the exact same thing happened. No black ink. Both printers have black full black ink cartridges.
View 3 Replies
ADVERTISEMENT
Apr 20, 2012
My IMAC recently downloaded software from Epson for my Epson Artisan 810 printer. The result is that my printer no longer recognises non Epson printer cartridges. Do I have to buy genuine Epson cartridges or do I buy a new printer?
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Mar 7, 2012
I have an HP DeskJet 6540 printer and I replaced the ink cartridges. After I replaced the cartridges, I aligned them and then did a test print. I noticed that the blank ink didn't print. I opened system preferences, and then I opened the printer utility. It says, "Device Status : Pen Failure." Current Supplies Levels says, "The current levels for the selected printer are shown below...Cartridge on the left (tri-color 97) is unknown and the the cartridge on the right (black 96) is missing." Oh, I forgot to mention that the print cartridge light on the left side is flashing. I went to the HP support website and it says that the problem could be an incorrect print cartridge, incompatible print cartridge, or problem with the (left/right) print cartridge. The solution they offered was to remove, inspect and reseat the problem cartidge. It also said to clean the problem cartridge contacts. I did that and it still gives me the same results. I even reset the printer but still got the same results...
So the next thing I try is the OTHER cartridges listed as compatible with my printer which is 94 (black) and 95 (tri-color). I bought the new cartridges, placed them in the printer and I still got the same message from the print utility. I took the latter cartridges back and got a refund and explained that none of the compatible cartridges are working with my printer. I kept the 96 and 97 cartridges in the printer and the light on the left continues to flash so now I'm here asking if anyone knows how I can get my printer to recognize the new ink cartridges I installed?
View 5 Replies
View Related
Jun 6, 2006
When I boot I get a full black screen, and:
/etc/master.passwd: No such file or directory
/etc/master.passwd: No such file or directory
-sh-2.05b#
I have tried fsck -f and it runs, I get the response The volume Macintosh HD appears to be ok I type "reboot" and it starts rebooting again and I get the loop of:
/etc/master.passwd: No such file or directory
/etc/master.passwd: No such file or directory
-sh-2.05b#
Is there any way of fixing this problem? I am running OSX 10.3.9 on a 17" iMac.
View 5 Replies
View Related
Apr 4, 2012
Why does my macbook pro screen (2010) go black while I am using it with full battery?
Info:
MacBook Pro (15-inch Mid 2010)
View 3 Replies
View Related
Dec 3, 2014
With the new update of Aperture there is now a black bar at the bottom of the photo when editing in viewer mode with the file name. I really want to get rid of it since it changes the cropping of the photo and I can't see behind it to edit.
Info:
Aperture 3, iOS 8.1.1
View 2 Replies
View Related
Dec 30, 2008
I just got an HP Photosmart C4250 and it doesn't print with the black cartridge. Yes, it's cartridge is properly installed inside of the printer but I really have no idea what it could be.
Is there a change the cartridge that came with in the box with it might just be defective or what?
View 3 Replies
View Related
Jun 17, 2012
I have a Canon MG5150, whenever i try to print documents, it doesn't allow for black ink only printing
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.4)
View 2 Replies
View Related
Sep 29, 2005
I have a HP PSC 1110 to which I print wirelessly, via an Airport Express, from my ibook. I've been useing it successfully for about a month, but today for the first time I tried to print photos from iPhoto and it wouldn't print in colour...in fact it won't print in colour wirelessly no matter which application the print job is sent from. When I attached the printer directly to the ibook via USB and it worked perfectly so I have a staightforward solution, but, it should work in colour wirelessly shouldn't it?
View 8 Replies
View Related
May 10, 2012
I have documents that were created using colors for the text that I find difficult to read. They also print in those colors.
I have followedEpson's instructions to set the NX400 to print black ink only. The printer still prints in color. Possibly, Epson's drivers don't work, Or possiby, something in Lion OS is overriding the drivers.
Is there some setting in Lion OS that overrides the printer drivers? Is it not possible to print black ink only?
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Jun 5, 2014
I have just bought new colour printer and do not want to waste money printer all documents in colour!!
Rather than having to remember to go into options and force to B&W each time, can I set it to default?
Info:
MacBook Pro (15-inch Mid 2010), OS X Mavericks (10.9.3)
View 3 Replies
View Related
Jun 10, 2012
My HP 5150 Colour Desk-jet printer will only print in black when using my new Mac Book Pro, it worked ok on my lod Macbook.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4)
View 1 Replies
View Related
May 27, 2009
The printer prints copies in a very light grey colour. I would like it to give a normal black print. It is the driver. If so where do I get an update for the driver. Or what else can it be.
View 2 Replies
View Related
Sep 16, 2009
So I have a DYNEX 21 inch HD TV conected up to my MBP via the VGA connection route. My problem is that when I want a program (or more specifically in this case a game) to go into fullscreen mode it automatically goes to my primary monitor and turns the other screen black. I know I can switch the primary monitor from my actual laptop screen to the TV however I just want the game to be full screen on the TV while still having access to my dock and everything on my laptop.
View 2 Replies
View Related
Sep 10, 2014
As the headline says the right half of the screen turns black when watching video content in iTunes on full screen. I can see the whole picture when moving the mouse a little but as soon as the navigation bar disappears the right half of the picture disappears too. It does not matter what source it is. Both podcasts and movies work (or do not work) the same.
The problem doesn't occur for other player (VLC, XBMC etc.).
I have the latest OS (10.9.4) and iTunes (11.4). The computer is MBP 13-inch retina, late 2012 if it matters.
Info:
MacBook Pro (Retina, 13-inch, Late 2012), OS X Mavericks (10.9.4)
View 1 Replies
View Related
Dec 26, 2010
I'm writing this thread on my dad's netbook bc my MacBook is so slow it took about 3 minutes opening Chrome, 2 minutes to get to MacRumors, forgot my password had to open Word, which I gave up on opening after about 5 minutes of spinning beach ball.
Booting takes about 10 minutes. Finder takes forever. Even moving the mouse over the dock to bring it up makes the computer freeze for at least 30 seconds, if not indefinitely.
The problem started two days ago. I was installing a new Windows XP program via Parallels, and somehow ran out of Startup Disk space. (I've been ripping my DVDs onto an external HD and sometimes I have up to 50+ gb before I get around to transferring to the external.)
When the "Startup Disk Almost Full" warning came up, I immediately erased 20 gb of space and emptied the trash. But everything was still stuck. So I closed out Parallels, rebooted (had to do a hard reboot), waited for the fifteen minute startup, and everything's been painfully slow since.
Activity Monitor says I'm using 1.82 gb RAM of a total 3.0, CPU is 79% idle, when I open Chrome, or anything really, I get the "Not Responding" beach ball, but no % of CPU working on the task, no increase in RAM, nada.
I have the black macbook, 2.16 GHz, 3 GB RAM, latest version of OSX
View 3 Replies
View Related
Apr 6, 2009
I was just wondering if a full system restore can be harmful or if it's good to do every once in a while to get that "fresh" computer feeling. I just re-installed OSX and everything feels like new but was just wondering if this is bad for the hard drive or something.
View 4 Replies
View Related
Jan 20, 2010
When I have my brightness at a certain setting and then start playing a game, the brightness jumps to full. When I then press the button for less brightness, it jumps immediately to the setting it was originally.
This also happens whenever I do alt+tab to return to the desktop. So it appears it happens when I do something that requires to switch to full screen mode cause it also happens with other programs.
At normal use, surfing, office,... this problem does not occur. And also it doesn't happen under OS X
View 1 Replies
View Related
Mar 23, 2012
I have taken everything off my desk top and backed it up and it's still saying the same thing! I've also emptied the trash. I get it when I try to use Photoshop.
Info:
MacBook Pro, Mac OS X (10.5.8)
View 10 Replies
View Related
Jun 5, 2012
I have a mac book pro...one of the older models...around 5 or 6 years old..the silver one with the silver around the screen part. Running Mac OS X 10.6.8,
2.33 GHz, 2GB ram.
Lately my computer has been rediculously slow with everything, but aside from that my issue is with my start up disc. I would have over 1.5 GB of space left, open up a photoshop file...make some alterations and save...and all of a sudden I have NO SPACE left. These alterations created the photoshop file to be like 50mb more. Its a 200mb file. So how can I go from 1.5 gigs to saving a 200mb .psd file and all of a sudden 0 hd space?
Sometimes I couldnt even save the .psd because when I opened it all of a sudden I have half a gig now. And even if I had half a gig why wouldnt I be able to save? I go to save and sometimes it says "your start up disc us full" - Is this different than my harddrive?
Is photoshop using some sort of weird caching thing?
Info:
MacBook Pro, Mac OS X (10.6.8)
View 3 Replies
View Related
Aug 29, 2014
Log and capture sees my 2tb external drive as only having 1.9gb of space yet, when I check "Get Info" it says there is 886+gb of space available. The drive is not partitioned.
Info:
MacBook Pro, Mac OS X (10.5.8), G-tech external hard drive
View 5 Replies
View Related
Feb 3, 2012
Desktop restart shows flickering black/white screen, then black. Could not restart.
Info:
iPad 2, Mac OS X (10.6.6)
View 3 Replies
View Related
Mar 19, 2009
I'm looking for a few good ways to transport and use my UMB. I figure buying a hardshell case & a timbuk2 bag seem like a good combo. Question is - which do you guys think is better, the Speck or Incase cases? Anyone have any experiences? I had the Incase hardshell for my old whitebook.
Seemed to work out alright. The other option I thought of was getting the invisible shield. Anyone have any thoughts?
View 24 Replies
View Related
Oct 18, 2008
Do any of you have a sensor-type looking thing on your iMac's? It's on the black strip around the edges just above the black Apple Logo.See my picture for what it looks like (you'll have to look closely to see it):I'm interested to see your responses of what it could be/is. I've only had the machine for going on for 3 days now so I'm new to the whole iMac thing.
View 4 Replies
View Related
May 24, 2012
I came back from work to wake up my iMac. It made the noise but the screen stayed black. I tried restarting by holding the power button- I can hear it start and the chime but still have a black screen. I tried resetting the pram, and unplugging the cord but I still get a black screen. I can hear the chime though; I'm not sure if that means anything. I just had the hard drive replaced in February so I hope it's not that. just wanted to clarify that when I restart, I get the chime but the screen stays black- I don't get to the grey screen. So I'm assuming right now that my display may be shot?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.5.8)
View 1 Replies
View Related
Dec 7, 2009
How come I can run 64-bit Windows 7 on my first gen Mac Pro, but I can't run Snow Leopard as completely 64-bit (with the 64-bit kernel). What am I missing here? Is it truly a hardware limitation or is it just a software block that Apple has put on these machines?
I always thought that you couldn't run Snow Leopard 64-bit Kernel because of the EFI32. After installing Windows 7 successfully, it makes me wonder if the inability of running full 64-bit Snow Leopard is just an artificial limitation.
What's the deal? I could be completely wrong about all of this. I'm still confused about the EFI32 thing. Can someone shed some light on this?
View 24 Replies
View Related
Dec 8, 2009
I've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?
View 11 Replies
View Related
Jun 2, 2006
I've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?
View 7 Replies
View Related
Apr 1, 2012
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
View 1 Replies
View Related
Dec 3, 2014
On my HP printer Officejet4620 I get an error message "waiting for printer to become available".
Info:
Imac with Intel Core Duo, Mac OS X (10.4.11), 512 MB memory 160GB
View 3 Replies
View Related