Hardware :: Airport Express (dropping / Disappearing Networks)
Jul 28, 2009
I've got a airport express a little over a year old. I use it as a wireless router together with a netgear modem. Worked fine till about a month ago. What happened was it just decided to not let me log on one day. I reseted it to factory settings and could not create a network afterthat. Kept saying network error. I took it into a mac store to get it fixed and apparently it's fine. Took it back home perplexed, gave it a couple more tries and it just decided to work again.
Now... after having no more issues with it for over a month. One night i just dropped off the network again (i use a macbook). Could not find my user network... so i reseted it again... same problem all over again. What's strange is i took it into work and it was fine! Netwrok was easily detectable. Anyone experiencing issues like this? Does location ( i don't know, maybe my apartment has too many wireless users?) have anything to do with this.
View 3 Replies
ADVERTISEMENT
Mar 30, 2008
I have an airport express with my MBP in my dorm but it keeps disappearing from my airport utility. Once in a while i can find it but then i can't find it again until i hard reset. I am using it for its wifi printer and audio uses and not for internet. What can be the problem?
View 7 Replies
View Related
Oct 9, 2009
I recently got an iMac G4. It had no wireless, and since that's what I use I bought the (correct) Airport Express Card. I installed it without a hitch, and it seemed to be working fine, until I reinstalled Leopard. Now every 2-3 minutes Airport will simply drop the connection. I have no idea why. I have updated all the firmware, but it continues to drop the connection.
I should also note that I'm on a MacBook right now that hasn't dropped the connection to the same wireless network.
View 2 Replies
View Related
Mar 12, 2010
How do i intentionally drop frames in final cut express? I tried to change it from the sequence dropdown menu but it changed the frames for the whole sequence. is there a way to drop the frames for a single clip?
View 2 Replies
View Related
Dec 10, 2009
I'm having major problems with airport. It seems that lately its become less and less effective at detecting wireless networks. I need to be sitting a few feet away from a router for my macbook (10.4.11) to detect it. This occurs with all networks. I never had this problem until the past year and its seemed to get progressively worse. I'm not sure if this is a confrontational or hardware issue.
View 2 Replies
View Related
Oct 28, 2010
I just installed a new AirPort card into my 2006 Mac Pro and it showed up just fine and I was looking forward to getting it online without using iPhone-tethering. BUT, I just can't get it to find any networks? What might be the problem? I've googled, rebooted, updated my drivers etc etc.
View 9 Replies
View Related
Dec 29, 2009
Ok so I've had my new iMac for a week now, all is great except the internet. Its connected wirelessly, but either goes really slow or websites just say loading. All the PC's in the house work fine.
Airport is connected - however even though it is connected is always searching for networks?
The Safari is slow and sometimes doesn't work at all. However always works upon a quick computer restart.
I wonder whether I've changed a setting by accident, or is wireless just not very good on macs?
View 19 Replies
View Related
Aug 7, 2010
I have an apple airport (age unknown), but it is one that looks like a mushroom cap. I have a network set up in WPA2 format. A nintendo DS user wishes to connect to wifi, but requires a WEP set up. Can I run both kinds of network or must a switch back and forth (since I like WPA2 more)?
View 2 Replies
View Related
Aug 20, 2010
I'm at work so i haven't had a chance to try it yet, but i was thinking:
one band for 802.11n 5ghz
one band for 802.11n (2.4)/b/g/a/whatever
one "guest" network
can you do all three separately at the same time?
View 7 Replies
View Related
Jan 21, 2010
My MacBook pro isn't picking up any networks! I know my home network is working as I can connect with iPhone but airport isn't even picking up neighbours network! Is this a hardware problem do you think? I'm desperate.
View 6 Replies
View Related
Jul 24, 2010
2.8 GHz Intel Core 2 Duo iMac using OS 10.6.4. I'd like to renew/erase the Airport networks listed under the Airport logo at the top banner of my iMac. My hope is to re-install Airport Express and have a wireless network again. I have tried using Airport Utility but get no where with it. In a related question: do Airport Express devices wear out after being used for 2-3 years or are they bullet-proof? I'm wondering if that is my problem.
View 1 Replies
View Related
Feb 8, 2008
Reason for the ? is because I'm not sure if this is really a problem or not. Whenever I'm at school there are certain places (inside classrooms mostly) I get either of these scenarios:
1. I get no signal whatsoever and my AirPort doesn't even detect the network
2. My AirPort will be able to detect the school's network but when I try to connect it says "<Network name> cannot be found"
3. If I do connect I'll get such terrible 1 bar signal that it's impossible for me to do anything.
Some key facts that you must know:
-Everyone else is able to connect! i.e. A student to my left, with the newer MacBook, will have a strong connectivity, and to my right will be student to my right with a Dell and has full strength connectivity. What is the deal here?
-I have a wireless router that I use at home and it connects to it no problems at all for the entire time I've had it. Full strength connectivity. I have the last generation of the 12" PB 1.5.
View 2 Replies
View Related
Feb 16, 2009
I'm already connected to a wi-fi and seeing as i'm on a desktop I don't think i'm going to be connecting to many others so how do I stop my AirPort card scanning for new networks constantly?
View 1 Replies
View Related
Jan 13, 2010
One day I noticed that my Macbook was having trouble find ANY networks available (despite knowing that many were available) - it doesn't see any. Occasionally the Airport will pick up a network or two with extremely low signal strength (even if the wireless router is in the same room) but usually has issues connecting and eventually the network disappears from Airport. At first I thought my Airport had totally crapped out and so I had to go out and spend $100 on a third party USB wifi stick (there are very few companies who make these for Mac, but for PC they can run for $15 ).
Now the crappy design of this USB wifi stick I purchased has caused the USB head to become bent and is ultimately deteriorating. SO, recently I noticed that when I use Bootcamp to run Windows 7 on my Macbook, Win7 is able to fully use my built in Airport hardware and receives great signal - so now I'm thinking that it may not be a hardware problem at all.
View 6 Replies
View Related
Feb 1, 2010
Last night my MacBook stopped finding any network to connect to. Usually there are about 10 networks that it picks up but now none show up not even my own network. My iPhone connects to my network fine as does my xbox and my PS3. Is there anything I can try to get airport to detect the networks around me?
View 1 Replies
View Related
Sep 18, 2008
I recently signed up for AT&T u-verse. As part of that service they provide you with a 2wire router. Initially my MacBook Pro (running the most recent osx) was connecting to this router fine. But, because i like the interface of my Airport Extreme router better, i decided to run a router-behind-router setup, to set up a network with my airport extreme. In other words, i ran a hardwire out of the 2wire router into my Airport Extreme, thereby allowing the airport extreme to disperse wireless signal as well. Therefore, there are currently 2 wireless networks in my house, one being dispersed from the 2wire router, and the other from my airport extreme. Both wireless networks are password protected in WEP-2.
Now i can no longer connect to the 2wire router. Everytime i try to do so, the system prompts me to type in the WEP password for the 2 wire router and upon doing so, it indicates that the password failed, the connection timed out, or that the connection failed. I've monitored the network preference pane as i'm trying to connect, and it invariably indicates that there is "NO IP ADDRESS" for the 2wire network. In fact, i can no longer connect to ANY OTHER wireless network which is password protected. It always gives me this same dilemma. The only password protected network i CAN connect to is my airport extreme network. Does anyone know what the hell is going on here? I'm completely baffled. I've gone so far as to delete all preferred networks from my system. Delete all network related passwords in the keychain access. and also to delete my network related preferences in Library ---> Preferences, to remove any 'confusion' the system might be having, but to no avail.
View 13 Replies
View Related
Jun 14, 2009
I have a wireless network router/internet thing in one room of the house and my g5 is in another room. I also have a PC laptop and that can connect to my home's wirless internet no problem. My G5 simply cannot connect or even sense my 2wire901 home network, but it can see other networks in my home area. I only managed to connect to my own home network once! And the 2nd time my 2wire901 can never be found. Get this; it has to be the mac. Coz my laptop is sitting right next to my mac in 1 room and it has no problems connecting.
View 5 Replies
View Related
Feb 20, 2008
I have had my MacBook sense Oct. 2006 and not until recently had any problems with the airport. Currently it will connect to any network as per usual and then with out notice just cut out for a few seconds and then come back on.
This isn't a huge pain if Im just browsing the net but if I am trying to hold a conversation using skype, IM, or downloading things it can get very very annoying. It cuts out about every 2 mins. It is not a problem with weak signal because when it is on it is showing full bars.
I have tried it under both my home network and my university network both resulting in the same thing. Is this a hardware issue (crossing fingers it isn't!)? Anybody having similar problems?
View 9 Replies
View Related
Jul 4, 2008
I just got a new airport card which seems to drop the signal quite often, any suggestions?
View 7 Replies
View Related
Mar 10, 2009
Just installed one of the original airport cards in this machine, and though all indications are that it is working correctly, it doesn't see the USR wireless router sitting 10 feet from it. No networks show up in the dropdown list, and manually adding does nothing. Encryption is a simple MAC filter (this card has already been added), and SSID is broadcast. Did I get a bad card? System profiler seems to think it's fine.
It's an original airport card.
Computer's a G3 400 Mhz iMac.
A G3 300 Mhz iBook with original airport card is having no troubles.
Firmware of Airport card is 9.52
Firware of router is up to date.
OSX 10.3.9
All help greatly appreciated; this is my moms little computer, and we're trying to rearrange and loose some wires.
View 1 Replies
View Related
Jul 16, 2010
When I click the Airport Networks icon in the menu bar (top right), my airport detects all the available networks. It lists some networks which are not mine and don't even require a password. Is there some way to remove these specific networks from the list, and so they don't get detected again? (I don't want to click by mistake a network that's not mine)
View 8 Replies
View Related
Apr 25, 2010
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
View 1 Replies
View Related
Jan 29, 2009
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies
View Related
Oct 11, 2009
Can it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
View 4 Replies
View Related
Sep 7, 2014
I have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS X on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.
Info:
MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)
View 2 Replies
View Related
Apr 29, 2009
I have an Airport Extreme with Dual Band Networks, and an airport express 802.11n edition. I have setup the Base station to do N,A,G,and B Networks, but I only want the express to EXTEND the G Network. How can I make that happen?
View 6 Replies
View Related
May 28, 2010
Every time I close my MBP screen I have to re-enter my WEP password for my wireless network. This is very frustrating and I'm not sure if it is just an issue with keychain or if it is something else. If it is keychain I have no idea how to fix it as I have tried everything I know.
View 2 Replies
View Related
Sep 5, 2008
this is my first post, i tried searching but theres so much there
I just purchased a new iMac 24" its beautiful. I hooked it up and it connected to my router without any real issues but it keeps dropping the connection at random, and its really getting irritating. Do i have a defective model? should i take it back?
So to sum it up, brand new iMac with Leopard installed, AirPort initially connects to my home network, and everything seems fine, but the connection drops at random, then comes back, VERY UNSTABLE. im ready to return the damn thing.
oh, both my pc's connect without any issues, also it seems like the network connection stays, just the internet goes away and in safari it says your computer isnt connected to the internet, but its connected to the network.
View 24 Replies
View Related
Mar 19, 2012
Since last week my iMac (Early 2009, OS 10.7.3) has been dropping its connection to the Internet. I'm using a router connected to an Airport Extreme and connect to it via WiFi. I tried connecting via Ethernet cable from modem to iMac but it would drop the connection entirely, which is why I had been connecting via WiFi. I have no problem with my other devices (iPad, iPhone and MacBook, this one with 10.7.2 installed), they connect immediately to the Internet and all, even the iMac, are able to connect to each other.
I already tried restaring the Airport Extreme, zapped the PRAM, reset the SMC, repaired permissions, disconnected the router and Airport from the power source and it still won't connect. Last time this happened, my iMac went to sleep and dropped the Internet connection after waking. I put it back to sleep and woke it using the power button as someone had suggested in another post, that helped and the connection was reestablished. This morning the iMac it was working fine, did not go to sleep at any time and suddenly dropped the connection, which I haven't been able to restore since.
Info:
iMac, Mac OS X (10.7.3), 24-inch, Early 2009
View 4 Replies
View Related
Apr 18, 2010
After configuring wireless security on my Airport Extreme base station, the Airport Express I use to stream iTunes music to my whole-house stereo system has disappeared. Airport Utility can't see it. Yes, I checked connections. All I get is a blinking yellow light on the Express. The base station works as its supposed to.
I have a 17" Powerbook G4 with a 1.33 GHz Power PC processor. I'm running MacOS 10.5.8
View 9 Replies
View Related
