I have an Airport Extreme with Dual Band Networks, and an airport express 802.11n edition. I have setup the Base station to do N,A,G,and B Networks, but I only want the express to EXTEND the G Network. How can I make that happen?
View 6 RepliesI can't seem to get my airport express to extend the guest network from my new airport extreme. It will extend the private network but the guest network doesn't show up in the list under airport utility. Is there anyway to extend the internet only except to one computer which needs to share a printer back to the original extreme?
View 4 Replies View RelatedI set up my new airport extreme today, but I have a concern. Obviously it supports dual band, but how do you set that up? I don't think I'm transmitting in wireless n because my iPod touch works fine on the network. I only see one wireless network. Does this mean I'm not transmitting in wireless n, or am I?
View 6 Replies View RelatedI have the newest AirPort Extreme that transmits simultaneously in 2.4GHz and 5GHz. It's been great. My speeds have jumped 2-3x what they were before I upgraded to this router. Now, I'm getting 28-30MB per second download speeds. Before this I was getting 8-10MB per second.
But, I have a problem. My MBP connects great to the AirPort Extreme (802.11n at 2.4GHz or 5GHz). One PC desktop works great with the AirPort Extreme (via Ethernet). And, I have another PC laptop connecting at good speeds (802.11g). But, I have one other PC that sees and connects to the Airport Extreme signal (802.11g) but nothing happens. It's like a garden hose with very little to no water. The signal strength is very strong and, again, the computer DOES recognize the signal. It's an XP desktop (4 or 5 years old) with an 802.11g card inside.
Any thoughts as to why I have this problem with this one computer? It connected fine with my prior wireless router. It's a new problem.
By the way, the Airport Extreme is setup with all of the normal defaults and "automatic" settings, WPA2, etc. My cable provider is Comcast and the router gets it signal from a new modem. There are no other
I have been having a long term problem with my dual band airport extreme...
The good news - the 5 Ghz band works great - I get very consistent download speeds of around 12.5 Mbps on my MacBook Pro.
The bad news, its not the same story with the other band. The speed is somewhat inconsistent and generally very slow - usually around 1-2 Mbps on my Macbook pro (although I did do one speedtest that got 8Mbps - def the exception though). On my iPhone 3g and my new iPhone 4, I am yet to get a speed greater than 1Mbps (and its been as low as 220 Kbps) its always slower than the 1.5 Mbps I get over 3g!
Can anyone tell me what the problem might be and how I might go about troubleshooting/fixing it?
I'm having issues getting my new XBOX 360 Slim to connect to my dual-band Airport Extreme when using wireless n. I can get it to connect with n but my connection speed on the 360 drops to 1 or 2 mbps, even though the signal remains strong. I can see the speed drop of the 360 using Airport Utility on my laptop. All other devices on the network are fine. When I switch the 2.4 GHz band on the AE to b/g only, then the connection speed on the 360 shoots up to 54 mbps. That of course neuters the rest of my wireless n devices to g speed since most connect to the 2.4 GHz band due to the limited distance of the 5 GHz band.
Short of finding a solution, my next step is to try a different router brand. I'd rather stick with Apple, but have had more issues with 2 AE models than all of my other Apple hardware combined.
I am looking to get a AirPort Extreme base station and use the dual radio modes. However, there are some peripherals like printers and game consoles that will not run on the 5 GHz band. Could anybody please tell me if the router allows sharing between both bands or just in each individual band?
View 3 Replies View RelatedAnyone have the new Airport Extreme? I have a question about the new features.
I'm interesting in picking one up because I've been looking for a good 802.11n router for awhile, and the simultaneous dual-band radios plus the guest networking feature are the real sellers for me. Both those features exist in part on other routers, but I'd have to put in a lot of work in a DD-WRT compatible router to get them both to work properly.
My question, though, is can both the dual-band radios and the guest networking feature be run simultaneously? It seems that from a hardware perspective, the easiest way to get a second network and SSID running would be to use the second radio, which precludes the dual-band feature. Does anyone have the new Airport Extreme yet? Can you run both at the same time?
I have a simultaneous dual-band AirPort Extreme base station running software version 7.5 and can't find the software install disk it came with. I reinstalled Snow Leopard onto my mini and it has AirPort Utility 5.4.2. When I try to connect to the AEBS, I get a pop-up stating that a newer version of AirPort Utility is needed, but I can't find anything newer than 5.4.2 on the Apple download site. Does anyone know if Apple has the AirPort Utility software that works with this hardware/software available somewhere?
View 1 Replies View RelatedI just bought a new Time Capsule and an Airport Extreme. Both are the newfangled dual-band type. At the moment the AEX is the main base station, connected to my DSL modem in the Living Room. The TC extends the AEX network and is in my office.
The instructions suggest the TC should not be a network client and rather be the main base station, and to make the AEX extend the network. How much difference will there be in Time Machine performance between the two topologies?
I would really prefer having the TC in my office, so I can attach via gigabit ethernet to the TC when I'm working there with my MBP. I cannot move the DSL modem to my office since I don't have a phone line there (it's really an upstairs bedroom).
Just bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router.
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.
Info:
Airport Extreme
I've been banging my head over this reading over and over multiple different threads but I can't come to any kind of a conclusion if I can do what I'm trying to do with the hardware I have. I realize when you have a g device connected to an N-network it drops the connection speed down. I was hoping I could get an express to extend the network then put the extreme in N-only and have my mbp connect to that, while the other devices (ps3 and iphone) could connect to the express in g mode. From what I've seen, everything is connecting to the express, including the mbp. Is there no way to force it to connect to the express in N mode? Is there no way I can simulate the functionality of "dual band" with just an extreme and an express?
View 5 Replies View RelatedI have an Airport Extreme (goes up to N) as my main router, and I'd like to extend my signal with a Linksys router that is a/b/g (no N support) and maybe an a/b/g Airport Express. Is this possible? Will I have to downgrade my network to G? Also, how do I go about doing this? My plan is to plug them into Ethernet spots throughout the house, but I don't want to have 3 different networks, so how do I make them wireless extenders as opposed to standalone routers?
Would it be worth it just to spring for a new Airport Express (that supports N)? If I do that, do I need to plug it into Ethernet to extend my signal, or will it be able to pick up the signal wirelessly and then extend it?
My current network in my apartment is as follows:
- cable modem
- one G airport express hooked to cable modem & a stereo
- another G airport express connected via WDS, attached to a stereo & printer
Except for the convenience of the 2 stereos for airtunes & the location of the printer, there's no need for the 2 airport express devices to be honest
While I have a bunch of G devices, I'm starting to accumulate some N devices, and for what I'm planning, I'd like to make use of the Extreme's gigabit ethernet ports in the location of my cable modem as well (which also happens to be where my TV is, going to set up some sort of media device). At the same time, I'd like to have the airtunes to both stereos and the printer connectivity without having to move either of the stereos or the printer.
I just wanted to verify that I could do what I was thinking here, the network would be structured as follows:
- cable modem
- extreme hooked to cable modem, broadcasting 2 SSIDs
- express hooked to the stereo, connected via WDS on 2.4ghz SSID
- express hooked to stereo & printer, connected via WDS on 2.4gz SSID
- any N device can connect to the 5ghz SSID but still interact (ssh, etc) with the stereos, printer, and machines on the 2.4ghz SSID
- any device on the 2.4ghz SSID can interact (ssh, etc) with the devices on the 5ghz SSID
Is this possible? And even if so, is there a better way to set things up to get what I want
New here and new mac user all together. I have looked quite a bit for an answer to this question but have not found one that applies directly to my situation.
My dilemma is that my apartment complex has free (unsecured) wireless but currently with my macbook pro, I can not register the signal in my living room. I just got Airport Express with the idea of extending the signal to all areas of my apartment. However when I go to "Join current wireless network", the apartment's signal does not show up (two other networks do show up though they are password protected).
I have read here that certain routers are not compatible with Airport Express (is this true?) and I am wondering if that's a possibility here.
Is there a fix for this? Do I need access to the router?
I'm at work so i haven't had a chance to try it yet, but i was thinking:
one band for 802.11n 5ghz
one band for 802.11n (2.4)/b/g/a/whatever
one "guest" network
can you do all three separately at the same time?
i am trying to extend a network with an airport express but the airport express cannot get a valid IP address and flashes amber.
my setup is as follows: netgear router/modem which handles PPPoE connected via ethernet to time capsule which handles the wireless network.
time capsule is working fine and has a valid IP address but airport express doesn't.
i have checked 'allow this network to be extended' on the TC, and connection sharing is in bridge mode.
i wonder if someone could help me troubleshoot this
I have a Airport Extreme and I would like to extend my network with an airport express but not sure if the airport express is only extending the network if it needs to be plugged into a ethernet if it is only bouncing the network on. Or does it have to have a fixed ethernet wire in it.
View 8 Replies View RelatedI recently upgraded to the airport extreme dual band II. I then moved my old extreme (N with gigabit) downstairs. It joins the network that the dual band is running to supply internet to my xbox, game PC, and ps3. The Dual band is running the newest firmware, 7.5.1 and the 5ghz network is very flaky. I have been forced to give the 5ghz a different name and use the 2.4ghz G band most the time. If I am on the 5ghz band my connection will just stop responding. Sometimes it work for an hour, sometimes for 5 minutes. Rejoining the network will make it ok again. Although last night I transferred 30gigs over the N network with no problem. It's not a distance issue since the problem is no better or worse whether I'm 2 or 25 feet away from the router. This is really driving me nuts right now. I just want to have one network setup and have the N devices use 5ghz and the G devices use 2.4 and not have to constantly worry about it.
View 2 Replies View RelatedI have the wireless N airport base station (not the dual band) and I also have an old airport express (B/G only). Is there any way I can set up my home wireless network so that the express handles all of the B/G traffic and the base stations handles all of the N traffic (thus not slowing down my N stuff with the G stuff). If this is possible, would somebody be able to provide idiot proof, step by step instructions for me.
View 1 Replies View RelatedI recently upgraded my Airport Extreme form the old "UFO looking" Airport to a the new Airport Extreme N and am having trouble extending the network using the older airport as a remote in WDS. I have followed both of the following articles without any success.[URL:...] I followed the 2nd doco (ap2124) up to point 6 and I followed the 1st doco (ap2045) from the start and applied the changes, but my older (ufo looking) airport extreme don't seem to connect to the newer Airport Extreme N. I contacted Apple support and after checking with the product specialist, they advised me that I couldn't mix the 2 devices and I would have to buy the Airport Express N and extend my network using the Express. my question is, has anyone extended their network by using 2 different Airport base stations?
View 2 Replies View RelatedHere's something I have tried in the last couple of days. I have Time Capsule and Airport Express. I decided to try the dual band. Time Capsule distributing 802.11n only (5GHz), and in a bridge mode, have Airport Express connected via ethernet, and distribute 802.11g only. Wireless N network has a name "xxxn." Wireless G network has a name "xxxg." Two separate networks are on different frequencies, and are in different radio modes. They are positioned about two feet away from each other. I have used various internet speed test websites, and from a distance close to the routers (same room) I get a speed check of about 25~30 mbps. That's the speed that I'm suppose to get. Move to a couple rooms away, I would say about three wooden walls, a wooden door, some "normal" interfering objects in between.
Speed test, and the results are very different. About 20 mbps for Wireless G only network, which is fine. But around 8.5 mbps for Wireless N only in 5GHz. Half the download speed. Upload is same at about 6mbps. In this case, wireless N was slower than wireless G. Harassed an Apple technical support and IP tech friend, and the answer was, "2.4GHz does better at passing through interferences such as large water tanks, electronic devices, glass and metal plates. 5GHz is not as resilient as 2.4GHz. For people experiencing issues with 5GHz, using 2.4GHz might be the better option." So there you go. Performance boost might not be that great. But then again, maybe new device has made a significant improvement.
Apple on Tuesday refreshed its AirPort Extreme and Time Capsule wireless products by adding a new Guest Network feature and support for simultaneous 2.4 GHz and 5 GHz dual-band networking. Time Capsule drives are now also accessible over the Internet for MobileMe subscribers.
The new Guest Network feature, available on the new AirPort Extreme and Time Capsule, allows you to set up a secondary network for friends and visitors with Internet-only access so you don't have to hand out your WiFi password.
Meanwhile, the new combined 2.4 GHz and 5 GHz mode allows your AirPort base stations to simultaneously support iPhones and other 802.11b/g devices operating at 2.4 GHz, while also broadcasting 802.11n wide signals in the 5GHz band to maximize throughput for notebooks and devices such as Apple TV.
Previous-generation AirPort Extreme and Time Capsule models can only run in one mode or the other, providing either wide compatibility or the highest possible network performance, but not both.
Also new to Time Capsule -- and oddly omitted from any of Apple's press-releases -- is that MobileMe subscribers using Mac OS X 10.5.x Leopard can now now access all of their files on their Time Capsule drive over the Internet.
You need only to register their Time Capsule with your MobileMe account. The Time Capsule drive will then appear in the Finder sidebar of your Mac just like any other attached drive.
"It's like having your own personal file server wherever you go," Apple says.
The new Time Capsule, which combines an 802.11n router and server-grade hard disk for automatic wireless back-up with Time Machine, and is immediately available in two models: a 500GB model for $299 and a 1TB model for $499.
I recently purchased a refurbished AirPort Extreme Card and AirPort antenna for my late 2004 Power Mac G5. My Mac is running on OS X Version 10.4.11. I properly installed them, since the computer notes the AirPort Extreme card in the "About Mac" menu. There are a couple of wireless networks near my home and the computer doesn't detect any of them. I've checked out previous forum discussions around this issue, tried some suggested troubleshooting to no avail. Can I presume the AirPort Extreme card is defective? It detects absolutely no signal from the other networks around here. Could the WEP password length of our router have anything to do with it? Do I need to download a driver to activate the AirPort Extreme Card? Could upgrading to a different operating system make it work?
View 8 Replies View RelatedWhen I click the Airport Networks icon in the menu bar (top right), my airport detects all the available networks. It lists some networks which are not mine and don't even require a password. Is there some way to remove these specific networks from the list, and so they don't get detected again? (I don't want to click by mistake a network that's not mine)
View 8 Replies View RelatedI have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
So the new Airport Extreme has two radios and allows one to use 2.4 ghz and 5 ghz simultaneously with 802.11 a/b/g/n in various configurations on either band. My question is this, can you use different types of encryption for each band/radio or are you forced to use one for all? What I'd like to do is have 2.4 ghz running 802.11 b/g for an older iBook and my iPhone using WEP encryption. Then have 5 ghz running 802.11n using WPA2 encryption. Both will use MAC address filtering to also tighten security a little. Lastly, can the guest login also use it's own type of encryption (or lack thereof) independent of the above?
View 3 Replies View RelatedHere is my situation. I am a network newbie. I bought a Airport Extreme (2008 model without dual band & guest networking) and have it setup with my ADSL broadband modem. I bought it so I could use the high speed N to connect to my Apple TV. It replaced a Linksys WRT54G.
My concern is this. We have another laptop in the house which only has Wireless G. It is connected most of the time to our network, so I presume that it will be slowing the speed of my Extreme to G levels.
Can I connect my old Linksys G router somehow to my network to create a seperate Wireless G network to access the internet. The older laptop can be at G speeds and my Extreme network remaining at N speeds ?
Maybe an easier option is to buy a N USB adaptor for my laptop but I don't want to buy something if I can use my current equipment.
I just got an AirPort Extreme Card from Apple that has been refurbished. I installed it in my G5 and then on power-on, the system hangs before the chime even sounds? I remove it and everything is back to normal...
Information:
Power Mac G5 Dual 2GHz
Mac OS X (10.5.1)
MacBook 2.16, PowerMac G3 B&W, PowerMac 8100 AV, PowerBook 540c, Mac Plus
I want to get an airport extreme base station to replace an old Belkin router that I use now.I have Virgin broadband and I currently connect three MBP laptops and an iphone via wifi and a Mac Pro and an Xbox 360 via ethernet to the Belkin, which is connected to the Virgin modem.The Mac Pro and one MBP also run Windows 7 using Bootcamp.I also have an old PC upstairs running windows xp that connects via wifi using a Belkin USB N adapter.All of this works fine now, but it's a bit slow due to the old router which is only pre-N.
View 3 Replies View Related