Hardware :: AirPort WDS - Extending Wireless Range?
Aug 24, 2009
I have a linksys wireless system set up in my home right now, but am trying to extend my wireless range to a few more rooms. I have tried to set up my Airport Extreme Base Station as a remote and have the linksys as the main station, but it doesn't seem to be working. Does anyone know if this is possible (i.e. have the linksys as a main station and Airport Extreme Base Station as a remote)? One a similar note, even after resetting the Airport Extreme Base Station and connecting it directly to the DSL modem, I cannot connect to the internet. The computers connect fine to the wireless network, but the internet will not load.
View 1 Replies
ADVERTISEMENT
Oct 11, 2009
I recently bought an airport express for itunes music and a print server. I have it setup as a client and once in a while i have audio drop out and itunes stops responding. I never have this problem when only playing through the laptop speakers.
the setup is a belking wireless router, nas hardwired to the belkin, ae client and wireless laptop all wireless g.
i thought about using the ae as an extender hoping this proble would go away but do I have to tell the laptop which router it would be hooked to if the se is an extender?
View 2 Replies
View Related
Apr 9, 2009
I recently upgraded my Airport Extreme form the old "UFO looking" Airport to a the new Airport Extreme N and am having trouble extending the network using the older airport as a remote in WDS. I have followed both of the following articles without any success.[URL:...] I followed the 2nd doco (ap2124) up to point 6 and I followed the 1st doco (ap2045) from the start and applied the changes, but my older (ufo looking) airport extreme don't seem to connect to the newer Airport Extreme N. I contacted Apple support and after checking with the product specialist, they advised me that I couldn't mix the 2 devices and I would have to buy the Airport Express N and extend my network using the Express. my question is, has anyone extended their network by using 2 different Airport base stations?
View 2 Replies
View Related
Jun 10, 2009
I'm lucky if I can get more than five feet away from my Linksys wireless-G router before the Airport Extreme says it's getting no bars. My son also has an Airport Extreme card in his iMac; connection is always iffy, even though his computer is barely four feet from the router.
Do I need a wireless-N router? Is there no backwards compatibility here (e.g. shouldn't a wireless-G router be able to work with wireless-N Airport Extreme cards?)
View 2 Replies
View Related
Feb 2, 2010
I got a friend who just moved into one of our apartments at back of our home and I want to extend the range of my wireless router so he can connect his PS3. The only two ideas I have so far was to get an extending phone cable and move the modem as close down the hall of my second floor abode, however I still don't think the signal strength be enough.
So I found out be repeaters and I like an explanation more as to how these works, what model/brand would be easy to configure for mac, cons, etc.
View 7 Replies
View Related
Sep 14, 2009
I have the last G5 imac made before Apple went Intel 4 years ago. It works fine. It has wifi.
But heres the deal. I just moved into an apartment in NYC. There are TONS of free wifi hotspots down the block from me that I can pick up on my ipod touch when I go outside. But INSIDE my apartment, my imac is out of range.
I need SPECIFIC advice on what I need to extend the reach of my imac to pic up wifi signals.
Again, these are FREE hotspots, so it's all legal.
Do I need an antenna? Or something else? Or both? What kind and how would I hook it up. How far is the reach? Be detailed, but keep it simple so a laymen can understand it.
View 2 Replies
View Related
Jan 26, 2010
I have a home network where all devices (various Macbook pros, xbox, ps3, pc's, etc.) connect wirelessly via airport extreme: works great. I am trying to connect an ipod touch from a distance of about 75 feet, and although it will connect, it drops the signal now and again (signal strength goes from 1 bar to no bars). I have this older dell "Wireless 2350 Broadband Router" and I am wondering if I could add this either in a wired or wireless configuration to repeat the base station signal (i.e., to extend the range of the network). I know that I could just run out and buy an airport express to accomplish this, but I'd like to see if I could "recycle" the dell router first. Whatever I do, I don't want to muck up the primary network in the process.
View 1 Replies
View Related
Sep 11, 2014
Just bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router.
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.
Info:
Airport Extreme
View 1 Replies
View Related
Oct 11, 2009
Can it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
View 4 Replies
View Related
Sep 8, 2009
I currently use a time capsule for wifi at home. It's located in my basement. The problem is the signal strength on the second floor isn't the greatest. I was wondering if I could extend the network by running a cable from the time capsule to the second floor and plug it into an airport express. Is this setup referred to as a "bridge"?
View 1 Replies
View Related
Aug 27, 2010
My MacBook Pro doesn't get receive wifi very well in my office, but my partners PC laptop does. I know there is a way to set up internet sharing so that the PC shares its internet connection to my laptop, but I do not know how to do this.
I'm running Mac OS 10.5.8, he has XP.
View 1 Replies
View Related
Dec 24, 2010
I have an Airport Extreme (goes up to N) as my main router, and I'd like to extend my signal with a Linksys router that is a/b/g (no N support) and maybe an a/b/g Airport Express. Is this possible? Will I have to downgrade my network to G? Also, how do I go about doing this? My plan is to plug them into Ethernet spots throughout the house, but I don't want to have 3 different networks, so how do I make them wireless extenders as opposed to standalone routers?
Would it be worth it just to spring for a new Airport Express (that supports N)? If I do that, do I need to plug it into Ethernet to extend my signal, or will it be able to pick up the signal wirelessly and then extend it?
View 1 Replies
View Related
Nov 3, 2010
New here and new mac user all together. I have looked quite a bit for an answer to this question but have not found one that applies directly to my situation.
My dilemma is that my apartment complex has free (unsecured) wireless but currently with my macbook pro, I can not register the signal in my living room. I just got Airport Express with the idea of extending the signal to all areas of my apartment. However when I go to "Join current wireless network", the apartment's signal does not show up (two other networks do show up though they are password protected).
I have read here that certain routers are not compatible with Airport Express (is this true?) and I am wondering if that's a possibility here.
Is there a fix for this? Do I need access to the router?
View 2 Replies
View Related
Jul 13, 2009
i am trying to extend a network with an airport express but the airport express cannot get a valid IP address and flashes amber.
my setup is as follows: netgear router/modem which handles PPPoE connected via ethernet to time capsule which handles the wireless network.
time capsule is working fine and has a valid IP address but airport express doesn't.
i have checked 'allow this network to be extended' on the TC, and connection sharing is in bridge mode.
i wonder if someone could help me troubleshoot this
View 2 Replies
View Related
Apr 12, 2009
I can't seem to get my airport express to extend the guest network from my new airport extreme. It will extend the private network but the guest network doesn't show up in the list under airport utility. Is there anyway to extend the internet only except to one computer which needs to share a printer back to the original extreme?
View 4 Replies
View Related
Apr 19, 2009
I have a Airport Extreme and I would like to extend my network with an airport express but not sure if the airport express is only extending the network if it needs to be plugged into a ethernet if it is only bouncing the network on. Or does it have to have a fixed ethernet wire in it.
View 8 Replies
View Related
Apr 29, 2009
I have an Airport Extreme with Dual Band Networks, and an airport express 802.11n edition. I have setup the Base station to do N,A,G,and B Networks, but I only want the express to EXTEND the G Network. How can I make that happen?
View 6 Replies
View Related
Jan 11, 2010
Wireless needed for I mac g3 Graphite DV 400ghz os 10.2.5 what are my options for long range, appx 500yds inexpensive USB.
View 3 Replies
View Related
Mar 31, 2010
I currently have the netgear router set with an IP address of 192.168.1.1 with DHCP enabled and no security set up (i originally had WEP enabled but this made the problem worse.
I then have two sitecom range extenders set up connected to the router wirelessly to extend the signal in opposite directions. One is set up with an IP address of 192.168.1.2 and the other 192.168.1.3 with default gateway set at 192.168.1.1 and DHCP disabled. This sets the network up working for a short time however as soon as more than one machine tries to connect to the network it all shuts down. It seems that the setup cannot assign IP addresses to more than machine at a time.
View 1 Replies
View Related
Mar 29, 2009
On the Bestbuy website they market the airport extreme as having the capability to become a range extender and the guy in the store said it would work with a linksys. The Linksys is a WRT150N. I have the airport extreme set-up in my room and it has a solid green light. When I go into the set-up for it I click join network and It sees the linksys and I select it and it says everything is working fine but it stays on the green light and the signal isn't being extended.
View 2 Replies
View Related
Dec 4, 2008
I am having trouble with my Time Capsule's wireless range. I am not a networking expert by any means. I own an old building that is 4 stories connected by stairs with thick walls.
All the rooms ethernet cables converge in a cubby on the 3rd floor. I placed my Time Capsule in the cubby, but I couldn't receive a wireless signal from the 1st floor. This is ironic because I have an old Netgear G router that sends signals throughout all 4 floors.
So I bought an Airport Express to extend my network wirelessly, but the signal has been unstable perhaps because the Time Capsule's wireless signal is too weak.
So I want to connect the Airport Express on the 1st floor using the Ethernet link from the 3rd floor Time Capsule which is my main router.
From my research, I discovered about WDS networks, which I believe you have to use in order to create a network with multiple Apple base stations linked through ethernet.
I called Applecare who told me:
-To connect from Time Capsule to Airport Express using Ethernet, must use WDS network. Setup Airport Express as Relay, NOT Remote.
-Relay- Direct ethernet connection from Time Capsule to Airport Express, then wireless connection from Airport Express to Macbook.
-Remote- Wireless signal from Time Capsule to Airport Express, then direct Ethernet connection from Airport Express to Macbook
I have several questions for you wise people out there:
1. To extend the Time Capsule wireless network using the Airport Express, but connected directly via ethernet, do I need to setup a WDS network?
2. I prefer to just use the simple Apple settings "extend network wirelessly". Will this setting only boost a wireless signal received from the Time Capsule? Can it not extend a wireless signal sent directly from Ethernet?
3. I'm considering getting a Quickertek Triband antenna to place outside the cubby. Anyone have any experience with Airport external antennas?:
[URL]
Any information would be much appreciated! These networking issues have been giving me months of headache.
Airport Express N version
Connected with 2.4ghz. band to N capable Macs.
View 5 Replies
View Related
Oct 7, 2009
I have a 2006 Intel iMac (Running 10.6.1)that is not seeing my wireless routers (D-Link 628 and Time Capsule Dual-channel). The D-Link is downstairs. It is not in the best place, but at my only option. My Macbook Pro sees the D-link fine on the same desk as the iMac. I replaced the D-Link with the Time Capsule and the iMac doesn't even see that. If I bring it close (completely underneath the desk) to the iMac it will see both routers. The weird part is before a hard drive crash and replacement it worked fine (I know, I know something is amiss from the replacement).
View 1 Replies
View Related
Mar 16, 2010
My BT Router is about, say 150M away, could I get a 100M Ethernet cable, plugged into the Router, going along the walls and then into another Router.
Then, from that Router have another 50M Ethernet cable going directly into my MacBook Pro?
So, like: ROUTER --100M-- 2nd ROUTER --50M-- MacBook Pro
Is this possible, or is 100M the end point? Can't go any further than that?
View 3 Replies
View Related
Sep 29, 2010
So, first time setting up an Airport Express. I had read that the Airport Express can be used as a range extender so I figure I'd give it a shot. Using the Airport Utility, I followed the directions to set it up to "connect to my current wireless network". It found my SSID and I was able to put my password there too. I had named the Airport Express "iqwertyi Extended". Everything looks fine, now my question is, am I suppose to see this SSID?
Or am I only supposed to see the original router "iqwertyi"? The reason I ask is that I don't see the new "iqwertyi Extended" SSID and connecting to the original "iqwertyi" on the other side of the house doesn't seem to have a better connection. I had plugged in the Airport Express in the middle of the house, but not sure if I set this up properly.
View 3 Replies
View Related
Jan 27, 2008
We use our MacBook Pro in our RV, usually in campgrounds with wifi. Often we're not near the transmitter, and the signal is unusable.
We've seen Yagi antennas on other RV's, and wonder how one of these might be used with our Mac. Specifically, what do I need to connect such an antenna to the Mac?
View 2 Replies
View Related
Sep 6, 2009
I am running ATT DSL Extreme 3.0 and have a Linksys WRT54G wireless router. I currently only get wireless in approx. half of my house, and the half in which I don't get it, will be needing it. So I am going to need to buy a range extender or wireless access point? I am a college student so I don't have a large budget, but I am looking for advice. Should I stick with Linksys and just buy one of their range extenders, or should I buy an Airport Extreme and hope the N signal is stronger? I am going to be sharing files soon when I get my Mac Mini HTPC setup going on in the living room to this from my other iMac's and MBP.
In summary, I am just not sure if it would be worth the extra $ for the Airport extreme or if I should just stick with the linksys.
View 23 Replies
View Related
Mar 24, 2008
I picked up a Time Capsule 500GB and an AirPort Express 802.11n today. I am trying to setup my network as follows.
Time Capsule as base station
AirPort Express as as range extender
I would also like to set up the AirPort Express to use it's ethernet port to provide internet for my DirecTV HR20 HD DVR. I've currently got everything connected and running, and the HR20 gets an IP address, however, it says that there is no internet connection.
View 7 Replies
View Related
May 14, 2009
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies
View Related
Mar 7, 2010
I have an airport extreme base station (wireless n draft). problem is, my room is all the way in the back and i get poor reception. Can i just buy another standard $40 wireless G router and "extend" my wireless network? if so, how easy would this be to accomplish? would it be as simple as hooking up the $40 router with my airport extreme using via ethernet cable so that it extends it? update: I am looking at this router...would this accomplish my purpose? [URL:....]
View 5 Replies
View Related
Aug 9, 2010
When I am on my wireless network at home, I cannot print to my printer (via AirPort).When I go to the router and connect with ethernet cable, the AirPort magically detects itself in seconds.I have Windows 7 computers running bonjour and they can print just fine using AirPort.I was able to print fine wirelessly to the AirPort but today it's not working.
View 4 Replies
View Related
