I currently use a time capsule for wifi at home. It's located in my basement. The problem is the signal strength on the second floor isn't the greatest. I was wondering if I could extend the network by running a cable from the time capsule to the second floor and plug it into an airport express. Is this setup referred to as a "bridge"?
View 1 RepliesMy MacBook Pro doesn't get receive wifi very well in my office, but my partners PC laptop does. I know there is a way to set up internet sharing so that the PC shares its internet connection to my laptop, but I do not know how to do this.
I'm running Mac OS 10.5.8, he has XP.
I recently upgraded my Airport Extreme form the old "UFO looking" Airport to a the new Airport Extreme N and am having trouble extending the network using the older airport as a remote in WDS. I have followed both of the following articles without any success.[URL:...] I followed the 2nd doco (ap2124) up to point 6 and I followed the 1st doco (ap2045) from the start and applied the changes, but my older (ufo looking) airport extreme don't seem to connect to the newer Airport Extreme N. I contacted Apple support and after checking with the product specialist, they advised me that I couldn't mix the 2 devices and I would have to buy the Airport Express N and extend my network using the Express. my question is, has anyone extended their network by using 2 different Airport base stations?
View 2 Replies View RelatedI have an Airport Extreme (goes up to N) as my main router, and I'd like to extend my signal with a Linksys router that is a/b/g (no N support) and maybe an a/b/g Airport Express. Is this possible? Will I have to downgrade my network to G? Also, how do I go about doing this? My plan is to plug them into Ethernet spots throughout the house, but I don't want to have 3 different networks, so how do I make them wireless extenders as opposed to standalone routers?
Would it be worth it just to spring for a new Airport Express (that supports N)? If I do that, do I need to plug it into Ethernet to extend my signal, or will it be able to pick up the signal wirelessly and then extend it?
I have a linksys wireless system set up in my home right now, but am trying to extend my wireless range to a few more rooms. I have tried to set up my Airport Extreme Base Station as a remote and have the linksys as the main station, but it doesn't seem to be working. Does anyone know if this is possible (i.e. have the linksys as a main station and Airport Extreme Base Station as a remote)? One a similar note, even after resetting the Airport Extreme Base Station and connecting it directly to the DSL modem, I cannot connect to the internet. The computers connect fine to the wireless network, but the internet will not load.
View 1 Replies View RelatedNew here and new mac user all together. I have looked quite a bit for an answer to this question but have not found one that applies directly to my situation.
My dilemma is that my apartment complex has free (unsecured) wireless but currently with my macbook pro, I can not register the signal in my living room. I just got Airport Express with the idea of extending the signal to all areas of my apartment. However when I go to "Join current wireless network", the apartment's signal does not show up (two other networks do show up though they are password protected).
I have read here that certain routers are not compatible with Airport Express (is this true?) and I am wondering if that's a possibility here.
Is there a fix for this? Do I need access to the router?
i am trying to extend a network with an airport express but the airport express cannot get a valid IP address and flashes amber.
my setup is as follows: netgear router/modem which handles PPPoE connected via ethernet to time capsule which handles the wireless network.
time capsule is working fine and has a valid IP address but airport express doesn't.
i have checked 'allow this network to be extended' on the TC, and connection sharing is in bridge mode.
i wonder if someone could help me troubleshoot this
I can't seem to get my airport express to extend the guest network from my new airport extreme. It will extend the private network but the guest network doesn't show up in the list under airport utility. Is there anyway to extend the internet only except to one computer which needs to share a printer back to the original extreme?
View 4 Replies View RelatedI have a Airport Extreme and I would like to extend my network with an airport express but not sure if the airport express is only extending the network if it needs to be plugged into a ethernet if it is only bouncing the network on. Or does it have to have a fixed ethernet wire in it.
View 8 Replies View RelatedI have an Airport Extreme with Dual Band Networks, and an airport express 802.11n edition. I have setup the Base station to do N,A,G,and B Networks, but I only want the express to EXTEND the G Network. How can I make that happen?
View 6 Replies View RelatedWhen I arrive at my office and turn on my MB Air, it does not always connect to my wireless network, it sometimes connects to an un-secured wireless network locaterd somewhere else in the building. Is there a way to force Lion to always connect to a specfic network and ignore others?
View 3 Replies View RelatedI have just got my 1Tb time capsule and there are a lot of confusing descriptions of how to connect it.
At the moment I have just selected "join existing wireless network" which is a ADSL 2.4ghz G Router that came with my internet package (Thompson TG585 v7).
Does this mean that all traffic goes via the ADSL Router and that I will not be using the 5ghz band when I back up so that all the data will follow a path like this and have slow data rates? :
MAC --2.4ghz--> ADSL Router --2.4ghz--> TC
or will I be communicating directly with the TC at 5ghz for backups and data transfer and 2.4ghz with the ADSL router for internet like this? :
MAC --5ghz--> TC
ADSL Router --2.4ghz--> MAC
If this is not a good setup, what setup would allow me to get the full speed to the time capsule and be connected to the internet.
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies View RelatedOK, I asked this question previously, but not quite succinct enough, I think. I have a Pioneer home theater receiver that is network capable, but not wireless capable. I want to get this thing on my home network without having to purchase another device as my Mini resides no more than 36" away from it.So far, I have been able to get the receiver to connect to the internet through Internet Sharing on the Mini, but it remains blind to, and invisible to my wireless network. I simply want to connect the receiver to my Mini via ethernet cable and have it see and be seen on my wireless network. url...
Info:
Mac mini, Mac OS X (10.7.3), 2.7 GHz i7, 256 GB SSD, 8GB RAM
I am trying to figure out how to automatically connect a MacBook to a network drive after connecting to the wireless network that the drive is connected to.
Here is the situation:
I back-up my wife's MacBook via Time Machine to an external hard drive that is connected to my Apple desktop. It works great! I even have her system setup to automatically mount the drive upon log-in. Unfortunately, after leaving our wireless signal and then coming back the time machine drive isn't automatically mounted since she isn't "logging back-in". Is there an automator script that can be built to automatically connect to drive X after connecting to wireless network Z?
I'm extending my Airport Extreme router with an Airport Express. In the Airport Utility I am given these options:
"Extend a wireless network"
"Participate in a WDS network"
Which one should I choose and why?
I bought my new (and first) unibody macbook 2 weeks ago. I'm loving everything about it
I was just wondering if the following is possible.
So I have a new macbook and a personal PC, both connected to a wireless internet network (with a D-Link Router).
There's a printer connected to my PC and I would like to know if it was possible to acces my PC through the internet and print files on it from my Macbook.
I hope I explained it good enough?
I inadvertently created a "Guest" wireless network account using my full name which is currently being broadcasted in my neighborhood. Of course I am concerned about having my full name out in public. I have my home personal network and would like to create a "Guest" network (minus my full name). Can someone walk me through the steps to get rid of my mistake?
View 3 Replies View RelatedI have a white MacBook running OSX 10.5.6, and I have trouble connecting to wireless networks that require you to login.Example: I'm in my school's library, I open up my macbook, connect to the wireless network, open up firefox, attempt to go to a web page, and get a message that says that I am offline instead of being directed to the wireless log-in page. This happens at every wireless location that requires you to login/buy a pass to access the internet. The only work around that I've found is to reboot my computer. I think the issue involves my computer retrieving the wireless network's DNS address. Is there a way I can force my computer to pull down the DNS address? I've tried manually entering the school's DNS IPs, but it doesn't seem to work all the time.
View 4 Replies View RelatedI am using a dsl wireless router to create a home network (damned if im gonna pay 2 bills for a japanese cable router) every time I connect, the internet service provider intercepts my link and forces me to log in, when I try to log in on another computer it does the same thing, but I can only log in one computer at a time on the same user id.
Is there a way to split the connection from my wireless router to each mac without the service provider recognizing it is two separate machines? This is legit, if I shell out the 2 bills for their wireless router I can log two machines in, so its not like im stealing service here, just trying to get my wife and I on at the same time without having to buy new hardware that is redundant.
Back at my parents house, my dad had an older Linksys Wireless G router where I would be able to see all of the other WinXP computers on the network along with their associated shared folders/drives/peripherals in the 'shared' tab on Finder's left side navigation pane. Since it's old, and my father doesn't fix what isn't broken, he doesn't remember how he set that up.
I'm looking to replicate this with my WinXP desktop and early 2008 MBP. I have a WRT310N Linksys router and WinXP SP 3. I've tried nearly everything, but the ease and simplicity of my dad's set up required nothing on the Mac side, whereas I'm seeing a lot of network configuration for most other methods.
On a side note, I'm hoping this will help me wirelessly connect an external HDD so that I can back up my MBP without connecting my USB Exteranal HDD to it ever night.
I have an airport extreme and created a wpa2 protected network. However, when I see my download traffic with my provider, I'm under the impression that it rises way too fast compared too what I do on the net... So I'm wondering if there's a way or a tool that allows me to see how many pc's have logged into my network. Surely my airport must store this data somewhere?
View 11 Replies View RelatedI upgraded my 802.11b router to an Airport Extreme. My MacPro is connected via LAN. My Macbook has a successful wireless connection to my network.
My problem: I want my Dell on Windows XP to have a wireless connection as well. The PC is still looking for the old router: Dell Trumobile 1180. I am still using the Trumobile 1180 wireless adapter to find my new network.
The wireless connection is excellent; however the Dell is not recognizing my new network.
I got fiber optic internet installed, and setup a pppoe wired connection using the username and password given to my by my ISP, and it works beautifully. But I can't get the wireless for it setup. When I go to Airport utility (my router is a Time Capsule), I tell it to set up a new connection, give it a name and password, tell it to connect using pppoe and enter in the same username and password as given by my ISP for that, and finish and everything seems to go ok, and it shows that i connect to the network, but pages wont load...
View 1 Replies View RelatedWhen I try to connect to a wireless network. It says there is no IP address? I know nothing about computers. The mac shoppe told me I needed to erase everything and re-install my software. I did this, and it still doesn't work. I'm very frustrated because I lost everything when I did this!
When I connect directly to the modem, it works fine.
My 2009 uMBP 10.6.6 is unable to join an open network, while my Win 7 Boot Camp partition, iPod Touch, and separate Win XP machine, all are able to. It can find the network, but when I try to join it, it immediately says "connection failed."
View 3 Replies View RelatedI took it out of the plugged it in. Turned it on. The airport refuses to connect to my wireless network. The exact same network my G5 connects to fine!
View 14 Replies View RelatedI am recently bought my mother a macbook and everything has been going great except for one thing. Everytime we turn it on I notice that we are on another wireless network that isn't hers. I looked in the Internet Network System Preferences but I couldn't find anything. How to change the default wireless network in Mac OS X.
View 2 Replies View RelatedI'm trying to get used my first iMac, and I'm having a bit of trouble printing from my wireless network. I have an HP Officejet 6210 that I have been using for the last couple of years with my Windows computer. I'm trying to print off of that through my network, but I keep getting this error
"There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or stop the job and try again."
I have printer sharing turned on through my Windows computer since the printer is connected directly through my windows computer. My other Windows computer that I have at the house can print through the network, but I'm having problems doing so with my iMac. I have the right driver selected through system preferences/print & fax, but it just won't print.
This is probably very basic but I don't know how to do it.I have an iMac (2007) running Leopard. I have an iBook (2004) running Tiger. They both share my home wireless network.
How can I best share documents between them? Eg how can I browse the hard drive of each machine from the other- ideally without entering passwords etc every time?
Additionally, the iMac is connected to the printer (because it is also a scanner); can the iBook share the printer too?
