I am very computer savvy and am the neighborhood/work "go-to" guy for PC/Mac/iPhone/anything type stuff. I have been all Mac for about a year now so I am still learning. I currently have the lousy WRT160N Linksys router. I am very confused about Extreme/Express base station. All the mess about music and portability is confusing to me. Does it serve as a fully functional router?
View 8 RepliesI have a new MacBook Pro (100% up to date) and when i click links for PDFs, Safari opens up a new tab and the whole tab is a darker grey color and the PDF never displays. I have followed many suggestions of deleting this AdobePDFViewer file but unfortunately I do not possess it. So I downloaded Adobe Reader and installed it. I set it to not be the default and to not open PDFs from Internet. I deleted Adobe Reader and then I found the AdobePDFViewer file and I also deleted that. But I still can not view PDFs in Safari.
View 2 Replies View RelatedI'm about to throw my HP Colorsmart C6180 out the window. The problems are mostly with the HP software, and my inability to get it to work with OSX 10.5.6 on my Mac Pro. Does anyone want to suggest a replacement that has all in one capabilities and actually is compatible with my computer?
View 6 Replies View RelatedI have a D-Link Extreme router, and the WiFi has issues with my MacBook and such every so often and it drives me absolutely crazy. But I have 2 wired computers and a Xbox 360 that never have a problem plugged into the router via ethernet. I was wondering if I bought a Airport Express and plugged it into the 4th port of my router rather then into modem would it have enough juice to transfer the WiFi? I don't want to spend the extra money on a more expensive router for some plugs and WiFi if I can still use my router for wired and send a wire to the Airport for wireless. Yet I don't want to spend the money on the Airport Express if it can't be used like that like some other routers can.
View 2 Replies View RelatedI have a PC (running XP Pro) that accesses the internet through a wired router (D-Link) hooked to a cable modem. My boyfriend just moved in with his iBook and Airport Express. I hooked the Airport Express to a LAN port on the wired router, and it basically works fine. He is able to access the internet wirelessly without any trouble. I also connected the printer to Airport Express and he is able to print wirelessly. However, I thought I was going to be able to also print to the printer because following info from Airport FAQ.
FROM AIRPORT EXPRESS FAQ:
Question: AirPort Express connects via wire to my third-party router, and I have plugged a compatible USB printer into AirPort Express. Will it share the printer with my non-Apple computers, too?
Answer: AirPort Express acts as a print server for any Mac OS X 10.2 or later, Windows 2000, or Windows XP computer that is on the same subnet, regardless of whether the third-party router is wired or wireless.
Can anyone comment on this? How can I make this feature work from my wired computer? Is there something I need to do to make them on the same subnet? Also, if there IS a way to print via Airport Express, is there a way for me to access airTunes too?
I did read a somewhat similar situation and this is what was advised. "Manually give it an IP address and subnet in airport admin (under the internet tab). For example if your router IP address is 192.168.x.1 with a subnet of 255.255.255.0 give your Airport Express 192.168.x.2 255.255.255.0. i.e. give your Airport Express 1 IP number higher than your router. Also make sure you are not distrupting IP address from your Airport Express, and you are creating a wifi not joining."
I feel really dumb asking it, having been "into" computers for over half my life; However I digress. Will an aiport express work with my router that came with the internet service I have? Or will it only work with an airport extreme base station?
View 8 Replies View RelatedI'm sure this has been asked upwards of a million times around here, and I've read a few of them. What I'm looking for is updated information. I was all set to buy a Linksys WRT54G as suggested by Arstechnica in 2004. However reading the first reviewer here suggests that Linksys has changed their internal firmware, and that I may not be able to use it anymore. All that has put me back at square one. Since this is a hack, different versions of each router may or may not work. I really want to know what currently sold routers people have managed to work with their Airport express.
Network information, current:...............
I've moved out to the middle of nowhere, and there's no phone line. However i do have a very fast 3G/HSDPA wireless router on the 'Three' network, and have been impressed by its speed - i was downloading at 285kb/sec just now! Only issue is that there's a 15gb/month limit on data, but it's the most i could get.
Anyway, it's not a USB dongle, it's actually a tiny wireless router and more than 1 person can be connected with no problems. It's a Huawei E585 Wireless Modem.Thing is, I still want to use my Airport Express (802.11n) to stream from different machines to my hifi.How should i go about this? If i connect the Airport Express to the 'Three' router (which is b/g speed) and use that normally, would it work properly do you think? Does anyone have a set up like this, or has tried it
I don't have my Airport Express with me as it's with a friend, so can't just go and try it myself. Obviously don't want to have to put a computer onto a different network to be able to use 'Airtunes'.
Not sure if this is possible, I'm sure there's someone out there who would be able to tell me either way. I've got a D Link router thats plugged into my 50mb in my lounge. I'd like to put my airport express in my kitchen and pair them so its the same network. The reason for this is that I have my HIFI in the kitchen which will be plugged into my airport so I can use it as remote speakers for my itunes while I'm still connected to the 50mb and D Link. Is this possible?
View 2 Replies View RelatedI live in a small apartment, so I never set up a wireless network, because, well I don't need to. However, lately I've been interested in trying some things out with my iphone to see how they work (the remote application mainly), but don't really have the money or need to go out and buy a wireless router. I was curious if there was any way to use my Airport Express Station as a wireless router? Someone told me it was possible, but after much googling, I didn't find much.
View 5 Replies View RelatedI understand what it is used for and how it works (for the most part) but it is actually a router? Can I get into it's settings with a browser to set up port forwarding and static IP's, etc.? I am looking to replace my Dell TrueMobile wireless router and I want to make sure that I have the right idea about the AirPort Express before I buy.
View 24 Replies View RelatedI'm trying to connect an AE to my PC using XP with a D-Link DIR-655 WiFi router. I've used the airport utility and connected the AE to my router via ethernet. It appears to be setup properly and I can see it on the D-Link software. After disconnecting the ethernet cable and with the AE sitting next to the router it continually shows up and then disappears. The light is green on the AE. Then I disconnected the power and moved the AE into the place where I'm going to use it.
Now it will show up on my D-Link software occasionally but the light won't turn green. It also doesn't show up on the airport utility software. I also have a Touch and ATV that both work fine on the same network and the same location. The AE is about 30 feet from the router with only one wall in between them. Am I missing something here or could there be a problem with the AE?
I have a linksys wirless router in room A next to my cable modem I have a stero system in room B connected to my tv
I would like to play iTunes music on the stero system in room B.
Do I have to buy two AirPort Express routers? One connected to the internet in room A and one connected to my stero in room B?
I know this seems like a silly question, but it's just something I want to ensure before I go out and buy an Airport Express.
I can plug in a CAT5e cable from my router into the Airport Express and it should work fine, correct?
Network diagram:
Modem -> Wired Router -> Airport Express
My current set up includes a cable modem to a Linksys wired router, to an Xbox 360, PS3 and Airport Express. This is the set up I have had for about three months. When downloading files or streaming videos the download speed rarely settles in more than 200 kb/s. My old place had a DSL model, which had a slower internet connection, but the airport express speeds (same set up) were much faster. I have tried directly wiring the computer to the router which unsurprising, resulted in much higher speeds. The things I can think it could be:
1. A lot of wireless networks in the vicinity.
2. Airport express just not up to streaming at height 802.11n speeds, although it is rated for them.
3. Attached to a slower port on the router.
I have a DrayTek Vigor 2800G wireless router which is connected to my phone line. I would like to use an Airport Express in the living room to connect to my stereo system in order to share my iTunes library from my Macbook. Therefore, is it possible to connect the Airport Express to the DrayTek router over wireless rather than a network cable? Or is a hard connection required?
View 1 Replies View RelatedI have a modem (Tilgin Vood 342) that came from the phone company which I use to connect my old desktop PC and my new MacBook Pro to the internet, through two separate ethernet cables. The modem has three ethernet ports and connects to the internet through an ethernet port in the wall. I want to buy an Airport Express in order to get wireless internet to my MacBook, but since my desktop PC can't receive wireless internet, I still need it to be plugged into the modem through a cable (I don't mind that). So my question is, can I use one of the modem ports for the Airport Express and another for the ethernet cable without there being a conflict?
I'm asking because I went to an electronics store and I was told that there might be a conflict and that I should buy an Airport Extreme or another router with ports in order for it to work. I would really prefer the Express because it's and it's the most I can pay for.
Can I use my Airport Express to extend my wireless network while using a Bountiful BWRG500 wireless router?
[URL]
i recently bought an Airport Express, and i finally took it out of its box after i purchased my new stereo. I connected the audio cable to the stereo and the airport unit and plugged it into an outlet. I opened up airport utility on my mac, AX appeared and i configured it to "join a wireless network". After completing the remaining steps, i updated it.. and waited for it to restart. Now here's my problem. It comes up with an error telling me it couldn't find the device after restarting. I have Verizon FiOS as my provider.. and I know that airport express has a history of trouble with the Actiontec router. Is there anything i can do with my current equipment to get this thing to work? I do not need to extend the network.. only join to use airtunes and print wirelessly... Also, my Actiontec router and FiOS connection are through my crappy dell pc downstairs, while i am using my 24" iMac upstairs in my bedroom trying to connect this. Should i change my router's settings?
View 10 Replies View Relatedmy router is linksys and i want to let my airport express join the network created by linksys wirelessly, would that be done? i was told at apple store that airport can extend existing network, what the problem is?
View 3 Replies View RelatedI have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies View RelatedCan it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
I have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS X on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.
Info:
MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)
I want to fully convert to the apple eco-system but can't afford the new airport extreme right now. Model number of the used airport is EbM8799LL/A
View 8 Replies View RelatedAfter configuring wireless security on my Airport Extreme base station, the Airport Express I use to stream iTunes music to my whole-house stereo system has disappeared. Airport Utility can't see it. Yes, I checked connections. All I get is a blinking yellow light on the Express. The base station works as its supposed to.
I have a 17" Powerbook G4 with a 1.33 GHz Power PC processor. I'm running MacOS 10.5.8
MBP 2.2; OSX 10.4.11; Airport Express 802.11n (version 7.3.2); WD MyBook 320GB (format Mac OS Extended) I'm trying to get the WD HDD setup as a wireless hard drive, but it's not showing up at all in Airport Utility (I don't even have a 'disk' tab in the 'manual setup' menu). Airport Disk Utility just says "no airport disks found." Of course the HDD works fine when plugged in directly to the MBP. I've searched apple support and these forums, but haven't found anything that works yet. All help I have found says use the 'disk tab' in AE manual setup window. What do I do without a 'disk' tab? (or how do I get one?) is this a firmware/software issue with the AE?
View 4 Replies View RelatedI currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
AirPort Express doesn't show up in AirPort Utility 6.0. I haven't updated the AirPort utility on my laptop, and can find it there. 6.0 doesn't even has a scan button... I've done a hard reset of the AirPort Express, still isn't showing up.
View 2 Replies View RelatedI recently moved into a new apartment that has an Airport Express connected to a cable modem. The network does not have a password. I want to put a password on it so that not everyone in the building can use our internet.
When I connect to the Airport via the Airport Utility, it recognizes the Airport, but asks for a password when I try to configure it. I tried doing a soft reset on the Airport, but it didn't change anything. Are there two passwords for an Airport? If so, how can I bypass the second one? The "Resetting Airport Express" page at [URL] doesn't answer this question. Do I need to do a hard reset? If so, is there anything I need to know about that? We no longer have any of the original literature that came with the product.
