Hardware :: Connect Both Airport Express And Ethernet Wire To Router?
May 16, 2010
I have a modem (Tilgin Vood 342) that came from the phone company which I use to connect my old desktop PC and my new MacBook Pro to the internet, through two separate ethernet cables. The modem has three ethernet ports and connects to the internet through an ethernet port in the wall. I want to buy an Airport Express in order to get wireless internet to my MacBook, but since my desktop PC can't receive wireless internet, I still need it to be plugged into the modem through a cable (I don't mind that). So my question is, can I use one of the modem ports for the Airport Express and another for the ethernet cable without there being a conflict?
I'm asking because I went to an electronics store and I was told that there might be a conflict and that I should buy an Airport Extreme or another router with ports in order for it to work. I would really prefer the Express because it's and it's the most I can pay for.
I'm trying to connect an AE to my PC using XP with a D-Link DIR-655 WiFi router. I've used the airport utility and connected the AE to my router via ethernet. It appears to be setup properly and I can see it on the D-Link software. After disconnecting the ethernet cable and with the AE sitting next to the router it continually shows up and then disappears. The light is green on the AE. Then I disconnected the power and moved the AE into the place where I'm going to use it.
Now it will show up on my D-Link software occasionally but the light won't turn green. It also doesn't show up on the airport utility software. I also have a Touch and ATV that both work fine on the same network and the same location. The AE is about 30 feet from the router with only one wall in between them. Am I missing something here or could there be a problem with the AE?
I have a problem with my Airport Express. I plug it in to the plug and connect the ethernet. When i go to search for the base station on Airport Utility it doesn't show it and it tells me to rescan to see if I can find it but it never does. Any ideas on how to fix ?
is it possible to run both a wireless connection with airport express, as well as have a direct ethernet connection to the computer? i have a simple, two-way ethernet splitter than comes from the port in the wall that should technically be able to do this, but i have tried this without success and i am guessing there is a little more to this problem than just having both connections hooked up at the same time.
anyways right now i am running on an airport express wireless connection. at my school there is a campus-based p2p program that can only be accessed through direct ethernet connection, leaving me inaccessible to it when i am on my wireless connection. there is a bunch of registration junk that has to be done when i switch from ethernet to wireless, which is why i would prefer to have both set up at once.
I have a DrayTek Vigor 2800G wireless router which is connected to my phone line. I would like to use an Airport Express in the living room to connect to my stereo system in order to share my iTunes library from my Macbook. Therefore, is it possible to connect the Airport Express to the DrayTek router over wireless rather than a network cable? Or is a hard connection required?
I have an Xbox 360 set up in my bedroom which is at the opposite end of the house. I have an airport extreme base station (new model) connected to my modem and PC (PC is not wireless, thus why i have it connected).... I have the wireless adapter connected to my xbox 360. I can play online with no lag (game: modern warfare 2) when nobody is on the pc but when someone is on the pc I get very noticeable lag. I guess I am fighting to split the connection with the pc. What is my best solution? 1) Have my ISP boost the speed of my modem. I didn't know if this would help by giving us more speed to fight over. 2) Get an Airport express and set it up closer to my bedroom/xbox 360. Will the express still fight for the connection with my pc like my wireless adapter on the 360? 3) Get the airport express and connect it directly to my 360 with an ethernet cable. Will i still be fighting for connection with the pc?
i recently bought an Airport Express, and i finally took it out of its box after i purchased my new stereo. I connected the audio cable to the stereo and the airport unit and plugged it into an outlet. I opened up airport utility on my mac, AX appeared and i configured it to "join a wireless network". After completing the remaining steps, i updated it.. and waited for it to restart. Now here's my problem. It comes up with an error telling me it couldn't find the device after restarting. I have Verizon FiOS as my provider.. and I know that airport express has a history of trouble with the Actiontec router. Is there anything i can do with my current equipment to get this thing to work? I do not need to extend the network.. only join to use airtunes and print wirelessly... Also, my Actiontec router and FiOS connection are through my crappy dell pc downstairs, while i am using my 24" iMac upstairs in my bedroom trying to connect this. Should i change my router's settings?
My iBook G4 is having network issues. Since waking from sleep, it will connect to my Airport Extreme base station, but I can't access the web, or access the router from Airport Utility.
Things I've tried so far:
*Rebooting
*Resetting the router to factory defaults
*Swapping out the router for a Linksys
*Clearing out network passwords from Keychain
I doubt it's a hardware issue, as everything works in Tiger (booting from an external drive).
I am attempting to set up a wireless network with an AirPort Express in order to access the Internet from my iPod touch. My computer is a 2002 PowerBook G4/667 running OS X 10.4.11 (the latest OS it can run), and according to an Apple Store Genus, either the AirPort card or the AirPort antenna is shot, rendering the PowerBook useless as a wireless device. Adding to the pain, my cable modem has only one Ethernet port. Hence, I have purchased a Belkin F5D5050 USB/Ethernet adapter (and installed USBPegasusEthernet 1.0.9 as a kernel extension to make it work).
Which I plan to use to connect the AirPort Express to the computer (via the Ethernet port on the Express and the USB port on the PowerBook). The modem would be connected via Ethernet directly to the PowerBook's sole Ethernet port. Everything I read on the Internet says that I should be able to configure the AirPort Express over Ethernet via AirPort Admin Utility, but the utility doesn't seem to see the Express, even if I directly connect them to each other (one Ethernet port to the other). How I could make my network operational?
I apparently have a unique situation. My ethernet connection, if that is what it even is, comes out of the wall. No connection, nothing like that, it just goes into the wall, and disappears. They told me on the phone it's a LAN. I have my IP, Subnet, default gateway, and DNS numbers. When I plug the cord into my computer, using the IP4 thing, it works fine. I have to put the numbers in myself, no big deal.
Then I plug my APE in, and go into the utility to try to set it up. I enter all of those numbers. But run into all kinds of problems. Vista has no probs connecting my comp up to the airport, but airport has probs getting onto the net. I have fiddled around for hours trying to enter the numbers differently, but with no luck.
I have a USB only printer. I also have this adapter: [URL]..... Is it possible to plug the printer into an ethernet port on my router and connect to the printer via IP? How would I go about finding the printer's IP address?
I have a D-Link Extreme router, and the WiFi has issues with my MacBook and such every so often and it drives me absolutely crazy. But I have 2 wired computers and a Xbox 360 that never have a problem plugged into the router via ethernet. I was wondering if I bought a Airport Express and plugged it into the 4th port of my router rather then into modem would it have enough juice to transfer the WiFi? I don't want to spend the extra money on a more expensive router for some plugs and WiFi if I can still use my router for wired and send a wire to the Airport for wireless. Yet I don't want to spend the money on the Airport Express if it can't be used like that like some other routers can.
I have a PC (running XP Pro) that accesses the internet through a wired router (D-Link) hooked to a cable modem. My boyfriend just moved in with his iBook and Airport Express. I hooked the Airport Express to a LAN port on the wired router, and it basically works fine. He is able to access the internet wirelessly without any trouble. I also connected the printer to Airport Express and he is able to print wirelessly. However, I thought I was going to be able to also print to the printer because following info from Airport FAQ.
FROM AIRPORT EXPRESS FAQ:
Question: AirPort Express connects via wire to my third-party router, and I have plugged a compatible USB printer into AirPort Express. Will it share the printer with my non-Apple computers, too? Answer: AirPort Express acts as a print server for any Mac OS X 10.2 or later, Windows 2000, or Windows XP computer that is on the same subnet, regardless of whether the third-party router is wired or wireless.
Can anyone comment on this? How can I make this feature work from my wired computer? Is there something I need to do to make them on the same subnet? Also, if there IS a way to print via Airport Express, is there a way for me to access airTunes too?
I did read a somewhat similar situation and this is what was advised. "Manually give it an IP address and subnet in airport admin (under the internet tab). For example if your router IP address is 192.168.x.1 with a subnet of 255.255.255.0 give your Airport Express 192.168.x.2 255.255.255.0. i.e. give your Airport Express 1 IP number higher than your router. Also make sure you are not distrupting IP address from your Airport Express, and you are creating a wifi not joining."
I feel really dumb asking it, having been "into" computers for over half my life; However I digress. Will an aiport express work with my router that came with the internet service I have? Or will it only work with an airport extreme base station?
I'm sure this has been asked upwards of a million times around here, and I've read a few of them. What I'm looking for is updated information. I was all set to buy a Linksys WRT54G as suggested by Arstechnica in 2004. However reading the first reviewer here suggests that Linksys has changed their internal firmware, and that I may not be able to use it anymore. All that has put me back at square one. Since this is a hack, different versions of each router may or may not work. I really want to know what currently sold routers people have managed to work with their Airport express.
I was just checking if I can set the Airport express to receive my Airport Extreme's WiFi network and connect a non-WiFi device to the Airport Express ?
Basically I have a linux machine and I cant get the internet sharing to work either they ping each other however won't let it access the internet so thats a different story but; my dad claimed I could use the airport express as a wireless-to-Ethernet bridge, it's connected to the wireless network however how do I get it to transmit the connection through the Ethernet cable?
When i try to extend my network with my Airport Express it creates another wireless network, wich is not what i want.
I have a Leve1 router as my main, connected to my modem.
My airport express is connected to the network with a CAT5 ethernet cable.
I use the setup in Aiport Utility and choose: I Want Airport Express to join my current network -> I want to connect AirPort Express to my network using Ethernet to extend my current netork or create a second network -> I choose my network on the list and click continue -> I want to connect AirPort Express to my network using Ethernet to extend my existing wireless network ->
And then it doenst join my network, but creates a new called Apple Network 00a133..
I live in a district where phone lines don't reach, therefore I don't have wire internet: only a 3G modem. Can I use AirPort without a cable? Or could I plug in the USB 3G modem into it instead?
i know that it is possible to connect a HD to the AE by the usb port but now that manufacturers are offering more and more external HD with ethernet is it possible to connect them to the Airport Express or do i really have to spend more to get the Extreme?
I'm planning to buy an AirPort Express. But I have a question. Can I stream my music wireless from iTunes on my Macbook, without connecting the AirPort Express to an Ethernet cable?
I've moved out to the middle of nowhere, and there's no phone line. However i do have a very fast 3G/HSDPA wireless router on the 'Three' network, and have been impressed by its speed - i was downloading at 285kb/sec just now! Only issue is that there's a 15gb/month limit on data, but it's the most i could get.
Anyway, it's not a USB dongle, it's actually a tiny wireless router and more than 1 person can be connected with no problems. It's a Huawei E585 Wireless Modem.Thing is, I still want to use my Airport Express (802.11n) to stream from different machines to my hifi.How should i go about this? If i connect the Airport Express to the 'Three' router (which is b/g speed) and use that normally, would it work properly do you think? Does anyone have a set up like this, or has tried it
I don't have my Airport Express with me as it's with a friend, so can't just go and try it myself. Obviously don't want to have to put a computer onto a different network to be able to use 'Airtunes'.
Not sure if this is possible, I'm sure there's someone out there who would be able to tell me either way. I've got a D Link router thats plugged into my 50mb in my lounge. I'd like to put my airport express in my kitchen and pair them so its the same network. The reason for this is that I have my HIFI in the kitchen which will be plugged into my airport so I can use it as remote speakers for my itunes while I'm still connected to the 50mb and D Link. Is this possible?
I live in a small apartment, so I never set up a wireless network, because, well I don't need to. However, lately I've been interested in trying some things out with my iphone to see how they work (the remote application mainly), but don't really have the money or need to go out and buy a wireless router. I was curious if there was any way to use my Airport Express Station as a wireless router? Someone told me it was possible, but after much googling, I didn't find much.
I recently found out that the Ethernet ports on the Airport Express Units are 100 MBits only. With a Time Capsule I am able to get 15-18 MB / sec via the WiFi, but the Airport Express, even though it has the same Air-capabilities, is limited to around 11 MB / sec through its Ethernet port. I hope they will get upgraded with Gigabit soon, I will replace all in my household. Is there any info on when it might happen?
Can the ethernet port on the the airport express be used to plug in a non wifi piece of equipment. Example I have a wireless router: WiFi to airport express (via ethernet connector) to xbox360.
The Apple site is quite vague on this point but I thought I'd clarify before buying one. I have a Time Capsule as my main router, but I want to move it, but when I do it's out of range of one of my computers. Can I plug the Express in near the computer, and then Ethernet it up to the computer, or is that Ethernet port meant to go into the TC?
I have a Airport Extreme and I would like to extend my network with an airport express but not sure if the airport express is only extending the network if it needs to be plugged into a ethernet if it is only bouncing the network on. Or does it have to have a fixed ethernet wire in it.
I finally convinced a friend to get a Mac and bragged about how easy everything works. He got a new iMac (loves it!) and signed up for Comcast High Speed Internet. Now there is a new MacBook in the house so I explained that all he would need is the AirPort Express in order to share the internet wirelessly for both Mac's. I went to set it up and I screwed everything up, after hours of work I not only couldn't get the Express working, I had to leave him without even ethernet internet. That's really all the info about his setup I have at the moment. So I came home to examine my own setup which is very similar: we both have the same Comcast modem (Arris TM502G) except I have an AEBS and he has a Express.
So I came home to examine my setup, it has been a while since I set mine up but its been flawless wirelessly (I never used the ethernet before). So, I plugged a ethernet cable in to the AEBS and connected my MBP. Works great. So I want to try to cut out the AEBS and just connect via ethernet from my MBP to the cable modem, that's where I start getting IP address problems. When an ethernet cable is connected to the AEBS my IP address is 10.0.1.12 and works fine. When I cut out the AEBS and try to run ethernet directly from my modem to my computer my IP Address changes to 169.254.181.6 and I get an error message saying that "Ethernet has a self-assigned IP address and may not be able to connect" and sure enough, I can't. Network Diagnostics tells me to configure via DHCP and restart the modem, still no luck. As I was searching tonight I came upon some discussion about Comcast limiting MAC addresses or something?
I just got an airport express. airtunes works fine, but for some reason I cant get it to create a wireless network when i plug in the ethernet cable, it just tells me the Ethernet is Unplugged. The cable works, as I am using it to connect now.
The setup is :
Cable Modem - MSI RG60SE Wireless Router - Ethernet Cable to my room
