Hardware :: Using 3G/HSDPA 'wireless Router' And Airport Express?
Oct 17, 2010
I've moved out to the middle of nowhere, and there's no phone line. However i do have a very fast 3G/HSDPA wireless router on the 'Three' network, and have been impressed by its speed - i was downloading at 285kb/sec just now! Only issue is that there's a 15gb/month limit on data, but it's the most i could get.
Anyway, it's not a USB dongle, it's actually a tiny wireless router and more than 1 person can be connected with no problems. It's a Huawei E585 Wireless Modem.Thing is, I still want to use my Airport Express (802.11n) to stream from different machines to my hifi.How should i go about this? If i connect the Airport Express to the 'Three' router (which is b/g speed) and use that normally, would it work properly do you think? Does anyone have a set up like this, or has tried it
I don't have my Airport Express with me as it's with a friend, so can't just go and try it myself. Obviously don't want to have to put a computer onto a different network to be able to use 'Airtunes'.
I live in a small apartment, so I never set up a wireless network, because, well I don't need to. However, lately I've been interested in trying some things out with my iphone to see how they work (the remote application mainly), but don't really have the money or need to go out and buy a wireless router. I was curious if there was any way to use my Airport Express Station as a wireless router? Someone told me it was possible, but after much googling, I didn't find much.
I have an airport extreme base station (wireless n draft). problem is, my room is all the way in the back and i get poor reception. Can i just buy another standard $40 wireless G router and "extend" my wireless network? if so, how easy would this be to accomplish? would it be as simple as hooking up the $40 router with my airport extreme using via ethernet cable so that it extends it? update: I am looking at this router...would this accomplish my purpose? [URL:....]
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
I have a D-Link Extreme router, and the WiFi has issues with my MacBook and such every so often and it drives me absolutely crazy. But I have 2 wired computers and a Xbox 360 that never have a problem plugged into the router via ethernet. I was wondering if I bought a Airport Express and plugged it into the 4th port of my router rather then into modem would it have enough juice to transfer the WiFi? I don't want to spend the extra money on a more expensive router for some plugs and WiFi if I can still use my router for wired and send a wire to the Airport for wireless. Yet I don't want to spend the money on the Airport Express if it can't be used like that like some other routers can.
I have a PC (running XP Pro) that accesses the internet through a wired router (D-Link) hooked to a cable modem. My boyfriend just moved in with his iBook and Airport Express. I hooked the Airport Express to a LAN port on the wired router, and it basically works fine. He is able to access the internet wirelessly without any trouble. I also connected the printer to Airport Express and he is able to print wirelessly. However, I thought I was going to be able to also print to the printer because following info from Airport FAQ.
FROM AIRPORT EXPRESS FAQ:
Question: AirPort Express connects via wire to my third-party router, and I have plugged a compatible USB printer into AirPort Express. Will it share the printer with my non-Apple computers, too? Answer: AirPort Express acts as a print server for any Mac OS X 10.2 or later, Windows 2000, or Windows XP computer that is on the same subnet, regardless of whether the third-party router is wired or wireless.
Can anyone comment on this? How can I make this feature work from my wired computer? Is there something I need to do to make them on the same subnet? Also, if there IS a way to print via Airport Express, is there a way for me to access airTunes too?
I did read a somewhat similar situation and this is what was advised. "Manually give it an IP address and subnet in airport admin (under the internet tab). For example if your router IP address is 192.168.x.1 with a subnet of 255.255.255.0 give your Airport Express 192.168.x.2 255.255.255.0. i.e. give your Airport Express 1 IP number higher than your router. Also make sure you are not distrupting IP address from your Airport Express, and you are creating a wifi not joining."
I feel really dumb asking it, having been "into" computers for over half my life; However I digress. Will an aiport express work with my router that came with the internet service I have? Or will it only work with an airport extreme base station?
I'm sure this has been asked upwards of a million times around here, and I've read a few of them. What I'm looking for is updated information. I was all set to buy a Linksys WRT54G as suggested by Arstechnica in 2004. However reading the first reviewer here suggests that Linksys has changed their internal firmware, and that I may not be able to use it anymore. All that has put me back at square one. Since this is a hack, different versions of each router may or may not work. I really want to know what currently sold routers people have managed to work with their Airport express.
Not sure if this is possible, I'm sure there's someone out there who would be able to tell me either way. I've got a D Link router thats plugged into my 50mb in my lounge. I'd like to put my airport express in my kitchen and pair them so its the same network. The reason for this is that I have my HIFI in the kitchen which will be plugged into my airport so I can use it as remote speakers for my itunes while I'm still connected to the 50mb and D Link. Is this possible?
I am very computer savvy and am the neighborhood/work "go-to" guy for PC/Mac/iPhone/anything type stuff. I have been all Mac for about a year now so I am still learning. I currently have the lousy WRT160N Linksys router. I am very confused about Extreme/Express base station. All the mess about music and portability is confusing to me. Does it serve as a fully functional router?
I understand what it is used for and how it works (for the most part) but it is actually a router? Can I get into it's settings with a browser to set up port forwarding and static IP's, etc.? I am looking to replace my Dell TrueMobile wireless router and I want to make sure that I have the right idea about the AirPort Express before I buy.
I'm trying to connect an AE to my PC using XP with a D-Link DIR-655 WiFi router. I've used the airport utility and connected the AE to my router via ethernet. It appears to be setup properly and I can see it on the D-Link software. After disconnecting the ethernet cable and with the AE sitting next to the router it continually shows up and then disappears. The light is green on the AE. Then I disconnected the power and moved the AE into the place where I'm going to use it.
Now it will show up on my D-Link software occasionally but the light won't turn green. It also doesn't show up on the airport utility software. I also have a Touch and ATV that both work fine on the same network and the same location. The AE is about 30 feet from the router with only one wall in between them. Am I missing something here or could there be a problem with the AE?
My current set up includes a cable modem to a Linksys wired router, to an Xbox 360, PS3 and Airport Express. This is the set up I have had for about three months. When downloading files or streaming videos the download speed rarely settles in more than 200 kb/s. My old place had a DSL model, which had a slower internet connection, but the airport express speeds (same set up) were much faster. I have tried directly wiring the computer to the router which unsurprising, resulted in much higher speeds. The things I can think it could be:
1. A lot of wireless networks in the vicinity. 2. Airport express just not up to streaming at height 802.11n speeds, although it is rated for them. 3. Attached to a slower port on the router.
I have a DrayTek Vigor 2800G wireless router which is connected to my phone line. I would like to use an Airport Express in the living room to connect to my stereo system in order to share my iTunes library from my Macbook. Therefore, is it possible to connect the Airport Express to the DrayTek router over wireless rather than a network cable? Or is a hard connection required?
I have a modem (Tilgin Vood 342) that came from the phone company which I use to connect my old desktop PC and my new MacBook Pro to the internet, through two separate ethernet cables. The modem has three ethernet ports and connects to the internet through an ethernet port in the wall. I want to buy an Airport Express in order to get wireless internet to my MacBook, but since my desktop PC can't receive wireless internet, I still need it to be plugged into the modem through a cable (I don't mind that). So my question is, can I use one of the modem ports for the Airport Express and another for the ethernet cable without there being a conflict?
I'm asking because I went to an electronics store and I was told that there might be a conflict and that I should buy an Airport Extreme or another router with ports in order for it to work. I would really prefer the Express because it's and it's the most I can pay for.
i recently bought an Airport Express, and i finally took it out of its box after i purchased my new stereo. I connected the audio cable to the stereo and the airport unit and plugged it into an outlet. I opened up airport utility on my mac, AX appeared and i configured it to "join a wireless network". After completing the remaining steps, i updated it.. and waited for it to restart. Now here's my problem. It comes up with an error telling me it couldn't find the device after restarting. I have Verizon FiOS as my provider.. and I know that airport express has a history of trouble with the Actiontec router. Is there anything i can do with my current equipment to get this thing to work? I do not need to extend the network.. only join to use airtunes and print wirelessly... Also, my Actiontec router and FiOS connection are through my crappy dell pc downstairs, while i am using my 24" iMac upstairs in my bedroom trying to connect this. Should i change my router's settings?
my router is linksys and i want to let my airport express join the network created by linksys wirelessly, would that be done? i was told at apple store that airport can extend existing network, what the problem is?
I just bought an Airport Express (Version: 6.3) And i tried installing it via the airport utility with no success. After several tries i got the Airport Express to install successfully but the blinking light on the Airport Express was flashing yellow. I know it was working because i was able to stream music via itunes to my Sound System. Everything was working fine, even though light was still blinking. I restarted my system and now it wont read my Airport Express?I also have a Airport Extreme Station (for wireless HD purposes) which i installed myself and have had no problems with, so i know im doing this right...But i just cant get this express station to work
Can an airport express be used to add wireless to a PC with the ethernet cable? I have an existing wireless network and I want to use the airport express rather than a usb adapter to add wireless to my PC to join the network, is this possible?
I really like my wireless desktop but want to have access to either my self powered Toshiba HD or the Western Digital 500GB MyBook. I don't want to give up wireless printing but only have one USB port to work with. Can I use a powered USB hub to act as a port multiplier and access both my printer and HD?
I have a Linksys wireless router set up (WRT54G) and my PC desktop and laptop connect fine to the internet with wire and wireless. I installed an airport card in our Power Mac G4 but this cannot detect my wireless network. I have it connected now with an ethernet cable running through the kitchen but want to get rid of the cable.
Is there a compatibility issue with airport and a Linksys wireless network? The Mac recognizes the airport card so I hope that means that it is good. (I got it from eBay used) This Mac is the farthest away from the router so I guess my next try is to see if I can move the router a little bit closer.
I am a newbie to wireless so possibly I have a setting wrong. I did tell the router the mac addresses of all of the computers that I want to connect. Any advice?
Since Saturday I've been having trouble connecting to the internet. For the last 18 months we've been connected to my Airport Extreme Base Station (2003) which in turn is wired to a Motorola SB5101 cable modem. Every time I had called the ISP (Comcast), they've been able to get it going while I was on the line by restarting the modem (which I tried before calling). Last night nothing would work no matter how many times I rebooted the modem and after many trial and errors, we were able to get connected to the internet by hooking my MBP directly to the ethernet cable from the modem and taking the Airport out of the equation. The service rep decided my router was likely at fault and I wasn't inclined to argue as it is an old router and things do break over time.
However, I ran out and bought a brand new Belkin Share wireless router and now neither that nor the Airport can connect to the internet even when the lights on the modem say all is well. Unfortunately, the Belkin came with it's own software package for router management and setup, which I'm not too keen on. It kept saying it couldn't connect to the modem or that the internet connection to the modem was lost. In tonight's efforts, I'm always able to plug my MBP right into the modem and get a connection, but as soon as I move that cable to the Airport or the new Belkin, my internet is gone. The Airport connection in the Network section of System Preferences always comes up as connected, but the Belkin glows dark red instead of green and the accompanying software says no connection to the internet can be found.
Does this sound more like the fault of the modem, the ISP, or me, the user? Any help would be much appreciated. Although I am able to connect now, my roommate's computer doesn't even have an ethernet port.
I have a three month old unibody MacBook, and up until yesterday, AirPort seemed to be working just fine, but over the past 15 hours or so, it has lost its wireless connection to the router four times. Two of the times, AirPort reconnected to the router on its own within a matter of seconds. One of the other times, AirPort said that it was enabled but not connected to any networks, and I had to manually reselect my router in the drop-down to reconnect. Now this morning, AirPort lost its connection to the router yet still showed that it was properly connected, but I couldn't access my network or the Internet at all. As soon as I disabled and re-enabled AirPort, everything was fine.
On top of this, I also got my first kernel panic yesterday for seemingly no reason while I was submitting a post to a forum, and I've submitted dozens of posts to that forum before without problem, so the forum can't be to blame. Normally one random disconnect from my router wouldn't be alarming, but four disconnects in the last 15 hours combined with a kernel panic that may or may not be related certainly has me searching for answers. I'm certainly quite confounded, especially considering that I haven't modified anything with my system, nor have I installed any programs in a long time. Should I be alarmed, or could this all be some coincidence?
I just got a 17" Powerbook G4 1.5 Ghz. My friend that sold it to me said that her wireless always had a really weak signal but in recent time, unless she was in the same room as the router it was really hard to get a decent connection. She said she took it to an Apple store but her Apple care was expired and they said they'd have to send it out for 5-7 days. Today I just tried it out at home, where I normally (as well as everyone else in the house) have full signal from our router, this computer gets a bar or two max.
I was adding in some more RAM to it so I figured I'd take it the rest of the way apart. So, in doing so carefully because I could not find a diagram at all that matched this computer, I found that there is not a Airport Extreme card in the computer at all. Is that right? Is the wireless built in now? (or maybe for that year). Is this a common problem that the signal fades?
I have a few questions about using a airport express as a wireless bridge to my tv room.
1. I want to use my airport express as a wireless bridge with my att 2wire router. Would there be any issues or would that work 2. I need to have 3 Ethernet ports but the airport has one would i be able to hook up the airport express to a switch to get the extra 2 ports. 3. Would I be able to do the wireless bridge and stream music at the same time.
The att 2wire is the modem the airport would be the bridge in the tv room and would be hooked up to a xbox 360, Slingbox Pro HD, and a directv HD DVR.
