Last week I happened to buy a new 16 gig pen drive to backup important stuff... then I started using time machine and everything was OK till today. Now whenever I pop in the flash drive to the USB port, my macbook won't recognize it and after a few seconds the drive will get really, really insanely-absurdely hot to the point that I will remove it afraid of something worse happening.
View 5 RepliesMy Imac is not reconizing my Flash Drive
Info:
iPhone 4S, iOS 5
I have a MAC Book and am trying to upload some files from an external drive (OWC Mercury Elite-AL Pro) to my notebook but am having trouble with it. When I plug it in, the drive doesn't even appear as an icon on my desktop. The drive works, is charged and is on.
View 7 Replies View RelatedI can not get my macbook pro to read my flash drive to import photos, how can I get it to work?
View 4 Replies View RelatedI have upgraded to Yosemite from lion now mac wont recognize any usb drives?
View 1 Replies View RelatedI have a 12" PowerBook G4 that stopped recognizing the factory hard-drive some time back. I have a G4 iBook so I was not in a hurry to look into it. I removed the old hard-drive and replaced it with a Scorpio drive of 60GB. It still fails to recognize the hard-drive. If I run the Apple Care diagnostics it hangs at the start-up while 'scanning for volume' or something like that. t hangs for 15-minutes or more and never moves past. The CD-RW drive is fine as I can boot the machine into the OSX installer up to the point where it asks for a destination...at which point nothing is selectable. It is a 867MHz G4 PowerBook with 768MG RAM. This is a fantastic notebook and I would hate to see it remain in this state. Does anyone have any ideas? I replaced the IDE cable and hard-drive with all new Mac OEM parts (except the HD) and reset the PRAM or PMU or what ever it is called...with no results.
View 5 Replies View RelatedWe have a imac 20" bought 9 months ago, Im in school and bought adobe suite and a printer, installed the printer with the internal optical drive, I go to install the adobe suite and the optic drive accepts the dvd and then just kicks it out! so it is toast, the apple guys gave me a repair depot to take the Imac to.
View 2 Replies View RelatedYesterday, (Mar 28,2012) Finder was listing my external drive but when I went to eject the drive, it no longer showed in Finder. I cannot eject the drive properly. It is showing on my Desktop. I've done a disk utility verfy disk and it is recognized and no problem was found. I tried a new USB cable and the old Fire Wire (which doesn't work??). I used a different USB port but nothing seems to work. I've also tried restarting. I am running a MacBook Pro with 10.6.8.
Info:
MacBook Pro
My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?
Info:
iMac, Mac OS X (10.6.8)
Recently I have formatted my hard drive and had few problem with installing lion, so I removed it install it like external drive from another computer then put it back inside and now it's not working, doesn't even spin, but I can boot from usb on that drive and the computer work.
Info:
MacBook Pro, Mac OS X (10.7.4), unibody 2009
I have a late 2009 15 inch mbp. I upgraded the hard drive to a 640g and has been fine for a while. I previously was not getting the correct drive size in bootcamp, was only seeing 595g instead of 640g total partition size. when i look at finder it shows 639 gigs, so correct filesize. When i look at disk utility through utilites and also when i boot from the install disk, they both say 639gigs as well. When I look in grandperspective it also shows only 454gigs used, while spotlight is showing 486gigs used. When i add up all the items on my hard drive
View 5 Replies View RelatedWhy can't I get my MacBook to recognize my flash drive? When in word or pages, I will go to file to "open" and my flash drive is not listed.
Info:
MacBook Pro
Why doesn't my IMac recognize my new Seagate 2 Terabyte hard drive. I have rebooted and inserted the usb cable into several different ports.
Info:
iMac
I bought a Mini just a couple weeks ago and a LaCie 2big Thunderbolt drive. It's been working flawlessly, but today it doesn't recognize the drive and doesn't recognize even having Thunderbolt support and I can find nothing on Lacie's site or Apple's regarding this issue.
View 1 Replies View RelatedI have a 2010 Mac Book Pro that I just downloaded the new OS X Lion for the upgrades ext... I haven't had any other problems except that before I downloaded the Lion my Mac would recognize my external hard drive (WD passport). And now it doesn't, I even go to the finder and it doesn't even show up under "computer" to make sure there isn't anything wrong with my external hard drive I plugged it into another mac that doesn't have Lion and it would work. My external drive has everything 1TG of everything.
Info:
MacBook Pro, Mac OS X (10.7)
I'm trying to use a Blue Snowball USB microphone to record in Garage Band (run on Mac OSX Snow Leopard). However, Garageband is not recognizing the Snowball when I go to Preferences.
In addition my mac is not recognizing the snowball when I go under sound within system preferences.
The power light is illuminated on the Snowball. I tried the Blue on my friend's mac computer and it also did not recognize the mic.
I bought a powermac G4 from ebay awhile back but just recently got it up and running. So far i am liking it and decided i wanted more ram then the 384MB it was sent with. So i looked on ebay to find ram, i purchased this ram right here. [URL] I bought 3x512mb and none of the sticks are recognized in any of the 3 slots. I'm thinking the problem is that the ram is high density, can any give me their opinion on it. Also, with pc's there is a way to get to a bios screen, do macs have anything similar to that? Besides the boot selection screen? I forgot to mention, the mac i own is a powermac g4 single 533MHz cpu.
View 7 Replies View RelatedI recently purchased a 15" MBP which is replacing an old PB G4. I used the PB at home and at the office and it performed brilliantly. I thought the transition to the new MBP would be seamless and it has been, save for one major issue. I cannot connect to my office server. In the past I simply brought my PB in, connected the ethernet cable in, clicked on "Network" and my office servers would appear in the Finder. When I tried the same thing with the MBP, I clicked on (my name)'s MacBook Pro>Network only to see a small icon of an Airport Extreme Base.
When I clicked on this it pointed me back to my HDD at my home which is plugged into the AEBS. That's all well and good and I love the ability to read my HDD at home from my desk at work but that's all that clicking on "Network" makes available to me. I have tried manually connecting though Finder>Connect to Server>Browse to no avail. Has Leopard made this so simple that I am overlooking a simple step or is it so complicated now that I need to bring in the IT professionals?
When I insert a blank disk into the drive, it doesn't show up on the desktop, although A CD-RW with data on the disk does show up. I've tried Sony, Imation and Verbatim CD-Rs. Running OS 10.5.6. Only other research has been to attempt searches on numerous other Mac websites, with no success.
View 1 Replies View RelatedSo, to all of you using Snow Leopard, especially those with a UMBP - can you post the following : Go to Activity Monitor and post the number listed below the pie chart. Here, in Leopard the number is 2.0GB but SL shows 1.75GB, and the "wired RAM" usage increases by 256MB.
View 3 Replies View RelatedI want to import massive amounts of footage from my camcorder and I want to import them into my external hard drive. The drive is plugged in, and is recognized by Finder, but when I hit import and try selecting the hard drive to save it, the external drive isn't there.
View 1 Replies View RelatedI've already RMA'd the first 1gb stick back to Crucial, and now I'm on the second. Sometimes the system boots, sometimes it hangs at a blank screen until I hold the power button down long enough to turn it off. But when I CAN actually get up and running, "About This Mac" reports that I only have the onboard 512mb. System Profiler says my singular expansion slot as empty! Yes, I've tried re-seating it-- many times. To no avail. I'm also positive the module is as far into the slot as it can go. And I find it hard to believe that Crucial would send me two faulty sticks in a row. Unfortunately, due to my built-in 512mb, I can't boot off the Crucial ram alone.
View 7 Replies View RelatedI pulled a 256mb stick out of the girlfriend's dead PC laptop and it fits in my 14" iBook G4 and when I originally put it in, "About this Mac" said I had 768mb, meaning it recognized the new RAM, now its about three weeks later and "About this Mac" says its 512mb again. So, I pulled the RAM out, put it back in, it recognized it for about a day and now its back to saying 512mb.I know when you buy RAM new, it comes with a CD(usually) to scan your computer, so is that the problem and if so, is there a download of the software online?
View 2 Replies View RelatedWhen I installed it, system profiler keeps saying it's 256. I have a 128 and 2 64's in there. In the 4th slot I put the 512. I tried just putting it in (to make just 512) and it still said.
What is weird is that when it only had the 512 stick in there, it seemed faster then with just the other 3 sticks. Is it just saying the wrong number?
I just replaced the original 20gb Toshiba HD in my 12" white G4 iBook (1.2gHz, 1.25gb RAM) with a new Western Digital 80gb Scorpio drive. No real issues with the swap, except the new harddrive apparently isn't being recognized. Don't see it in either the Disk Utility or System Profiler, but I can sure hear it spinning after power-up. I know it needs to be formatted, but how is that possible without being able to access it with the Disk Utility?
So, what's my next step? Anything I can try without taking the whole damn thing apart again and checking things with the old harddrive? BTW, only trouble with the old drive was its size. I've been running Leopard on it for several months.
I plugged in my microphone into the mic port on the left side of the computer. I am trying to use it for my Ustream feed but it is not recognizing it.
View 11 Replies View RelatedI have a g4 dual 1.25 ghz with airport extreme card in it. I recently bought a powermac g5 dual 2.3ghz. I tried to swap the airport card into the g5, but when I did that, the computer did not want to scan and pick up any networks. Is this because I need an extra antenna? Moreover, when I put the airport card back into the g4, the computer no longer see's it. I know its firmly plugged in. What I would like to do is have the g5 use the airport card, but help on how to get the g4 to recognize it again would also be helpful.
View 4 Replies View RelatedI have a 2.4 Ghz MacBook that i bought last summer, and a 250 GB Western Digital external hard drive (powered by computer) that i also bought last summer.
My problem is that My computer will not recognize the hard drive at all. it doesn't show up anywhere, and after attempting to reconnect it over and over, it will eventually pop up, and then disappear, saying that it was improperly ejected.
I'm trying (desperately!) to copy a section of a DVD. it is approximately 1h30mins long, but I only need 10mins for a work project. I am having real trouble doing this. I am new to Mac and so am probably doing something wrong. I'll run through what I've done so far:
1-Ripped the dvd to a m4v format and put it on my desktop
2-Opened iMovie and tried to import the file
3-The file is visible, but is grey and unable to be selected
4-Clicked the file on my desktop to preview it, it automatically opened in iTunes-I don't know if that is normal or not
The file is able to be played in Quicktime.
Neither Safari (v4) nor Firefox can connect to the internet. However, my internet connection is fine, and iTunes is currently downloading a video podcast no problem, in fact I can see under Activity Monitor that it's downloading at 110KB/sec, which is blazing fast for where I live (Indonesia). I can also get email no problem. And the other weird thing, is that I can use Safari for Windows no problem on my Windows side (through Parallels), which I'm using right now.
I did recently update to Safari 4, but up to now I've had no problems. And the fact that I can't use Firefox either leads me to believe it's not just a Safari problem. The only thing I can think is my ISP has recently been updating their system, and I have had some issues recently connecting, but right now my internet connection is otherwise great. Does this have something to do with DNS servers or something? Why can I use Windows browsers on my Mac no problem (through Parallels on Windows XP) but not Apple browsers? I'm on OS 10.5.7 FYI.
