So, to all of you using Snow Leopard, especially those with a UMBP - can you post the following : Go to Activity Monitor and post the number listed below the pie chart. Here, in Leopard the number is 2.0GB but SL shows 1.75GB, and the "wired RAM" usage increases by 256MB.
View 3 Replies
My MBA does not recognise my powered USB Hub (TRUST). I constantly get the message that whichever of my external Hard Drives are connected to it that they have not been ejected properly. This is very frustrating as I cannot do a Time Machine Backup on one and I cannot access my Aperture or iPhoto Files on another.
Info:
MacBook Air, Mac OS X (10.7.2)
I just installed Windows XP via Bootcamp and when I go into Windows and try to insert my mac OS X snow leopard it does not show up?
View 11 Replies View RelatedWhy can't I get my MacBook to recognize my flash drive? When in word or pages, I will go to file to "open" and my flash drive is not listed.
Info:
MacBook Pro
I have been having problems with Time Machine and a Seagate GoFlex external drive. I've partitioned the external drive as a backup startup disk and a backup particition using Time Machine. It will work fine for some time and then not function as planned.Â
For example today, my Software Update indicated there were available updates. One was a System Installer. I chose to update. When the update was complete, my backup was no longer available. Time Machine indicated the drive was now "read only", and that a backup could not be completed.Â
As I said, this external drive and the setup I have works for sometimes a month or better, and then I run into some kind of problem like this, and am forced to erase and partition the drive all over. This sure does defeat the expectations for an external drive backup. Â
I've contacted Seagate several times. They've had me download a utility that keeps the drive from going to sleep.
Info:
iMac, Mac OS X (10.6.8)
I upgraded to Snow Leopard and now my printer scanner won't work. It says it cannot recognize my computer. I have installed a few updates available and restarted and it still won't work.
Info:
iMac, Mac OS X (10.6.8)
3 iMacs on network (running Leopard) are not recognizing the printer that is connected to iMac running OS X 10.3.9. Attempted to make some changes in Terminal on the Leopard' macs in regards to the CUPS protocol that the 10.3 version of OS X uses to recognize networked printers but it didnt seem to work.
Note: I did attempt to add --- cupsctl BrowseProtocols='"cups dnssd" --- to the Terminal in accordance with an article on Apples support area but the Terminal responded with "unmatched".
About two weeks ago, I lost my Utilities folder. I tried everything, then I tried to take the utilities off the disc that came with my MBP, but after about 30 seconds, the disc ejects, without doing anything. What should I do?
View 1 Replies View RelatedMy father just sent me a DiskGo Edge external harddrive (used by him but only for some email files, no damage I know of) and it is not at all recognized by my computer, won't show up in disk utility or anything- it also won't show on my school's computers which are also macs. I've tried thier website troubleshooting page and no luck there. It did work on a PC before. There are two blue lights on it, and altough two are on when the power outlet is plugged in, only one is on when i plug the USB in my macbook. It's clearly the external itself since it hasnt shown on 2 computers-- but how do I get it to be recognized?
View 3 Replies View RelatedMy computer stopped recognizing my administrator's name and password. I can log onto my computer but I can't update any software.
Info:
MacBook Pro, Mac OS X (10.5.8)
I had an Imac running Snow Leopard... I mistakenly(?) thought i could change Permissions by selecting "Everyone" from the startup volume HD icon's Permissions panel and in turn, chose "Apply to All Enclosed Files and Folders" option thinking this would allow all other computers on a small office network to have total free and clear no-security-required, file-sharing read/write- access to this Imac's contents. After doing this and attempting reboot, I couldn't get access to the OS at all even after i ran DiskWarrior and DiskUtilities, so, wound up doing Archive/Install - but used an OS 10.5 disk because i (mistakenly)thought that my 10.6 Snow Leopard disk was only an Updater. So after installing 10.5 again I ran the OS 10.63 disk's installer, bringing the new System Folder up to Snow Leopard. I'm up and running - most system software updates downloaded/done. Problem is now this -- stuff like: Email Clients, Itunes, Browsers, any Apps that had associated data/content files isn't recognizing the old, original contents that belonged to them - instead, these apps all
Info:
iMac, Mac OS X (10.6.8)
... long time reader, first time poster!! So I'm doing it. I'm switching from PC to Mac. I've been waiting for a while now and the new MacBook Pro's have convinced me. I'm buying the 13 inch this week.
However I'm slightly worried about the upgrade to Snow Leopard in September.
My question is if I buy a new MacBook Pro this week and upgrade from the current version of Leopard to Snow Leopard will it be the EXACT same as the version of Snow Leopard that ships with new MacBooks after September?
Is the upgrade just the same as the full software version available post September? Does the upgrade it just detect if you have the previous software and installs as if it were the full? Or does it just "patch" things depending on what's different from previous versions?
I can wait till after Snow Leopard is released in September 09 if it is different to Leopard upgraded to Snow Leopard.
I am using an HP Color Laserjet 3505n. Will snow leopard work with this printer?
View 2 Replies View RelatedI have a Snow Leopard Install Disk for the 13-inch Macbook Pro model.I also have a 21-inch iMac. I have OS X Lion installed on both. I have Snow Leopard installed as a partition on my Macbook Pro, which I installed via the install disk. I want to do the same thing for my iMac but I am unable due to (seemingly) my install disk is for a Macbook Pro and not for an iMac.
Info:
iMac, Mac OS X (10.7.3)
"Photoshop CS" and "Acrobat 6.0 Standard" suddenly stopped working in my iMac, apparently after I upgraded it to MacOS 10.6.8 (the latest version of Snow Leopard). Both programs had worked normally until that OS upgrade. I deleted Photoshop CS and tried to re-install it from the original CD, but the installation never proceeds because I get an error message entitled: "Install Adobe Photoshop CS quit unexpectedly". This is the full error message:Â
Process:Â Â Â Â Â Â Â Â LaunchCFMApp [1516]
Path:Â Â Â Â Â Â Â Â Â Â Â /Volumes/Adobe(R) Photoshop(R) CS/Adobe(R) Photoshop(R) CS/Install Adobe Photoshop CS.app/Contents/MacOS/Install Adobe Photoshop CS
Identifier:Â Â Â Â Â com.MindVision.InstallerVISE
[Code]...
Today I performed a clean install of Snow Leopard on my late 2009 Mac Mini. After completing the installation, I began running software update to bring everything up-to-date.While software update did find and install a number of updates (10.6.8v1.1 Combo update, Security Update 2012-002, Apple Software Installer Update, iLife Support 9.0.4, Remote Desktop Client Update 3.5.3, Airport Utility, Java, Safari) it did not find an update for iTunes (which starts at version 9.x, I believe, in a SL clean install).I assumed that this was some sort of random glitch and manually downloaded and installed iTunes 10.6.3.After that, I re-installed iLife '11 (from a retail DVD, not the App Store).When I ran Software Update again, it found updates for Garage Band, iDVD, and iWeb, but it did not show the updates for iPhoto and iMovie.I found this to be unnerving, as I performed a clean install when I first obtained this Mini a few months ago and didn't experience any of these problems - all of my Apple software updated automatically through Software Update without a hitch.
I began researching this problem online and found that other people have been experiencing this same problem (or some variation of it), and it seems like it began appearing around the time Apple updated some of its security certificates in March.In particular, I've found several references to the missing iPhoto update.This one is especially noticeable because an iPhoto library created in iPhoto 9.2.3 will not open in iPhoto 9.0, and this generates an error upon opening the program (i.e., a user backs up their iPhoto library created in 9.2.3, performs a SL clean install, reinstalls iLife, goes through the Software Update process until it shows that no more updates are available, and are shocked to find that they are unable to open their backed up iPhoto library because they have an out of date version of iPhoto).The most common (and admittedly logical) solution proposed in the threads I've read is to download any necessary updates directly from the Apple website. However, I am curious as to why this previously functional feature now appears to be broken.Has anyone else been struggling with this? Does it indeed have something to do with the new security certificates? Is Apple aware of the problem?
Info:
Mac mini, Mac OS X (10.6.8)
I'm currently using a MBP 13 inch and am running Leopard on it.
I just bought a copy of snow leopard today but i don't know if I should do a direct upgrade from leopard to snow leopard, or wipe my MBP and do a fresh install so i have snow leopard on a clean slate.
Have any of you tried the second option before? Or do any of you have advice on which path I should take?
I have my drive partitioned between Tiger and Snow Leopard. I am trying to move myself over to Snow Leopard so I don't have to keep switching. The problem is that my old apps that alledgedly will work in SL, give me an error box when I launch them. It happens with Appleworks 6 and Quicken 2007. I've installed Rosetta but don't know what else to do.When I launch either application, it says it unexpectedly quit and gives this info:Â Process: [code]
View 13 Replies View RelatediMac with 2Ghz Intel Core 2 Duo, 4GB RAM, plenty of space available and currently operating 10.5.8. Now I want to upgrade to Snow Leopard and since my Mac Mini came with it, I attempted to use the OSX install disc from the Mini in the iMac. I don't see a reason why this shouldn't work. There's no DRM or anything as far as I know. I'm just trying to bridge the gap so I can download Lion. I've looked into some of the advice others have given on this subject but my computer doesn't have those issues. I've tried booting from disc but I get the same message.
Info:
iMac, Mac OS X (10.5.8), iPhone 4
Question: I already have snow leopard installed on my iMac. But can I still do a CLEAN snow leopard installation onto my imac even though snow leopard is already installed?
I tried it just now like twice but I got the spinning wheel of death. It wouldn't go pass the apple sign and spinning wheel.
I've been using Leopard since 2008 and everything has worked well. Now that I have to have at least Snow Leopard to run some apps, I'd like to upgrade to Snow Leopard. Are there any pitfalls I should be aware of? I'm assuming I will still be able to run all my apps and access my files.
Info:
Mac Pro, Mac OS X (10.5.8)
Interesting... at the same time as Magic mouse comes into stock (well, in UK Apple stores, anyhow), Apple release the "Wireless Mouse Software Update 1.0 for Leopard" & "Wireless Mouse Software Update 1.0 for Snow Leopard".
Here are direct links to the installer disk images, to save you time - even if you don't yet have a Magic mouse, you can install the software now to save time later:
Leopard:
[URL]
Snow Leopard:
[URL]
I also found it interesting, how the mouse icon has changed into a Magic mouse in System Preferences:
I don't know about you, but Snow Leopard's aurora is so much cooler. I used a program called "Desktop 2 Login" to change the default wallpaper for the login screen to a different wallpaper. Using this same program I changed it back to L's Aurora. (Still in 10.5). When I upgraded to snow leopard, the login wallpaper did not change. It is still stuck on L's aurora. I have used about every method besides Terminal, and it won't change.
View 3 Replies View Relatedhow can i redownload snow leopard after reinstalling an old version of leopard from disks?I have a mobileme account and an icloud account?
Info:
iMac, Mac OS X (10.5.8)
Anyone have any idea of a feature that was originally going to be in Boot Camp, allowing it to switch very quickly between a hibernated version of Windows and a sleeping version of Leopard, is gonna be back for Snow Leopard?
Apparently the feature was dropped before the final version...
This would've been awesome, would love to see it back...
[URL]
Firstly I am sorry if this has been posted before, but I did have a look at the Snow Leopard FAQ & a browse through the current topics. And secondly, I am also sorry if I am not using appropriate computer language to describe certain things. I have a 17 inch Macbook Pro I bought in the middle of last year. Before Snow Leopard. So when Snow Leopard came along I went for the upgrade without looking around at compatibility issues with certain software.
So after the upgrade, my EyeTV didn't work, and neither did my internet (I use the ones with the USB stick). So I couldn't even go online to get my EyeTV update. So in my (brief) panick I re-installed Leopard, which wasn't a great idea I guess, because all of a sudden my HD space went down to 50GB from my 500GB of storage. Now I know I didn't have the full 500GB since I did have some photos, music & videos on board. But surely 50GB remaining is quite ridiculous. I think it probably performed a Time Machine backup for me.
Anyway... that was awhile ago. And I was happy to carry on with what I had. But now I think I would like to try what Snow Leopard has to offer. But with only 18GB of space remaining, I think the best option might be to reformat and start over. What do you guys think? My other option is to try to delete as much as I can spare to make room for Snow Leopard. Sorry if this question is a silly one, but I have done a lot of things with my iPhone & with this Mac without thinking & asking first & I have always regretted it. Thanks for any help or suggestions you all can offer.
I have a tower Mac Pro with Snow Leopard running on it.Unfortunately one of the software that I use doesn't have yet a Snow Leopard update. So I am thinking maybe I can install older version of Leopard on one of the internal drives (i have 3 additional internal drives), so I can boot my computer from either Leopard or Snow Leopard, depending on needs (i don't want to get rid of Snow Leopard).
I never installed OS X system before, so I am a bit scared.The internal drive is ready, I have the old Leopard on disks, what are the next steps to take?
I've recently acquired an iMac and wanted to upgrade to Lion, however I believe I need to upgrade from Leopard to Snow Leopard first - which could prove to end up costing a fortune! I've read recently that Apple are offering the upgrade to Snow Leopard free of charge for MobileMe users, however when I've followed a link to fill in a request form, this just takes me to the Find My Phone feature on iCloud.Â
Info:
iMac
Apple this weekend followed the release of its latest Snow Leopard beta with new pre-releases of both Mac OS X 10.5.8 Leopard and Mac OS X 10.6 Snow Leopard Server.
Mac OS X 10.5.8 build 9L25
Since opening the Mac OS X 10.5.8 beta test to developers approximately one month ago, Apple has shown signs that the release may cap off development of Mac OS X 10.5.
For example, each new build has arrived with a focus area noticeably distinct from the last, with lower-level technologies and frameworks seeing greater attention than usual. As such, it's been speculated that the Mac maker may be giving its Leopard OS a final once-over.
This trend appears to have culminated with this past weekend's release of build 9L25, which no longer asks that developers focus their attention on a small subset of Leopard's components. Instead, it groups together the more than three dozen components that had been isolated into smaller focus groups in earlier betas.
The latest build also lists no known issues and addresses just two new bugs, one related to saving mail messages as individual message documents and another to URL localization.
Mac OS X 10.6 Server build 10A403
Separately, developers this weekend were also treated to a new build of Mac OS X 10.6 Server, labeled build 10A403. With it, Apple asked that they test upgrade installs of the server software itself, in addition to upgrade installs of Calendar server.
Developers were also reportedly asked to spend some time with the system's new Podcast Producer, evaluating as many third-party video and web cams as they possibly can. Included with the software is a new Web Podcast Capture which leverages a new Dual Source Video Capture feature for allowing users to create picture-in-picture format podcasts.
Mac OS X 10.6 build 10A402a
Mac OS X 10.6 Server build 10A403 arrived on the heels of Mac OS X 10.6 Client build 10A402a earlier in the week. That build introduced some widely-reported interface tweaks to the Dock's pop-up menus and Expose.
One AppleInsider reader has published a few more screenshots of these interface changes to his blog, including the Dock's new menus, Expos�'s new grid view, and changes to the Dock's grid view scroll bars. [ View this article at AppleInsider.com ]
I have an imac with leopard OS and a macbook pro with snow leopard on it, and I can't seem to connect the two computers. Even when they are directly connected with ethernet cable, I can see the imac but not connect with it. I can connect to the macbook from the imac, but not vice-versa. My network is ethernet through linksys WRT610 router. Repeated attempts to connect from the macbook result in "connection failed" message and "imac may not exist or is not available."
View 7 Replies View Related
