I'm trying to use a Blue Snowball USB microphone to record in Garage Band (run on Mac OSX Snow Leopard). However, Garageband is not recognizing the Snowball when I go to Preferences.
In addition my mac is not recognizing the snowball when I go under sound within system preferences.
The power light is illuminated on the Snowball. I tried the Blue on my friend's mac computer and it also did not recognize the mic.
I plugged in my microphone into the mic port on the left side of the computer. I am trying to use it for my Ustream feed but it is not recognizing it.
View 11 Replies View RelatedI am trying to connect a GPS device to my computer via a USB cable and the computer is not recognizing the device.
View 2 Replies View RelatedI've owned my macbook air for less than 12 hours, and it's already f'd. I normally use a time-capsule to back up my old macbook. I had filevault turned on, on my old macbook (and so I guess it was also applied to the data on the time-capsule) -I turned on my new MBA and told it to take all the macbook data (including login profiles etc) off of my time capsule. I figured this would be easier than migrating components of the data over.-Now, I can't login to my profile on my new macbook air. I have the right password, but it's saying that filevault can access the data, or something. Maybe it's because it's not recognizing the new machine. -At this point, I just want to start fresh with the macbook air. I stuck that little reboot key in the usb port and re-installed the software. Unfortunately, after I did that, the old login profile (which I can't access) were still on there. I get it - I'm bad with computers. Even with the really user-friendly, idiot-proof ones.
View 1 Replies View RelatedI just installed 8 gigs of ram on my mid 2009 13 inch macbook pro. OSX recognized the ram as soon as I rebooted but the windows partition still says 4 gigabytes. Am I forgetting something or is windows just... being windows.
View 23 Replies View RelatedI notice sometimes that if I don't type anything with the keyboard for a few minutes, that when I resume typing the computer does not input the first keystroke. Does anyone else have this issue? IIRC, the SR MBP I had before this that I got replaced did this as well.
View 17 Replies View RelatedSo... for reasons unknown, my macbook pro is not recognizing it's internal speakers, in the sound options for output it only shows the digital out option.I searched trough the apple support site and the mac's help and all they say is to select the speakers, but that's kinda hard when they play hide and seek. Anyone knows what's up with that? Cause the weirdest thing is that they will make that mac sound when you first press the "on" button.
View 18 Replies View RelatedI'm trying to connect my Macbook Pro to my tube TV. I connected the DVI to Video adapter to an S-video cable and connected the S-video cable to the TV. The television is not recognizing the Macbook Pro - the screen stays black. Do I need to change the settings on the TV or the Macbook Pro?
View 5 Replies View RelatedI have a 13" Macbook that, all of a sudden, cannot find my HP 4280 printer on my network. The Printer is plugged into my 21" iMac, and I'm using a Linksys router. I never had any trouble until recently, and when I open up the "Printers and Faxes" option in System Preferences, my printer isn't listed. When I click "add a printer", it's not there. I have cleared my printers and reset everything, but it hasn't fixed it. I can plug it in via USB and it recognizes it, but it won't find it via airport.
View 2 Replies View RelatedIt went from having 4Gb yesterday (or the last time I checked it anyway) down to 2Gb. I'm using a Macbook Pro Unibody bought in July 2009. System Profiler says that it only has RAM in one slot. What's going on and how can I sort it? After Effects is also saying that it can't multi-process - I was able to previously so I'm confused on that too.
View 10 Replies View RelatedSo i decided not to sell my free ipod touch, however my mbp won't recognize that i've plugged the ipod touch in. I spoke on the phone with applecare and was able to restore the touch but neither the laptop or itunes will even recognize it's there. However, applecare is closed now and i would really like to be able to use it for work tomorrow.
I know my usb ports work, i've tried 3 different cables, tried restarting the touch , the ipod touch charges but since it's new the startup screen telling me to plug it into the computer, is all i can access on the touch. I just updated itunes and restarted my mbp and still nothing.
I own a MacBook Pro, around a year old, which is not recognising any video DVDs I insert. After putting them in, the computer makes the usual motions and sounds, but after a few seconds spits the disk out again. The disk isn't mounted on the desktop during this time, and DVD player does not launch automatically. I have tried opening DVD player myself while the computer is trying to find the disk, but there is still no result.
My MacBook has previously recognised these same disks, up to a few weeks ago when I found I might need to insert the disk two or three times before it played. CDs are still recognised by the computer (and iTunes, as well as mounting on the desktop), as are DVD-ROMs. I have tried many different DVDs, all of which play in my other Macs and DVD players.
I have a MAC Book and am trying to upload some files from an external drive (OWC Mercury Elite-AL Pro) to my notebook but am having trouble with it. When I plug it in, the drive doesn't even appear as an icon on my desktop. The drive works, is charged and is on.
View 7 Replies View RelatedI have to click now, can't just tap. This just started today.Â
Info:
MacBook
I bought a new MacBook yesterday, downloaded Logic 9 and installed the USB drivers for my Saffire 6 USB audio interface but cannot locate it in either the system preferences or the Logic 9 audio preferences. How do I get this working ?Â
Info:
MacBook Pro (13-inch Late 2011)
I just purchased a MacBook Pro and when I tried to import all my music files, from an external drive, iTunes did not recognize the .wma files.Â
I ended up copying all of the files (50GB worth) from the external drive to the Music directory on the MacBook. That is when I was able to determine that it was the file format that iTunes did not recognize. And clearly I see why, they are Windows Media files.Â
Is my best option to use Switch (or similar file converter program) to convert all the files that are currently .wma to .mp3 and just be done with it. Or is there an add-on for iTunes that can do this?Â
I am more than okay with deleting all the music files from the MacBook and starting over. I just want to get this right, from the start.Â
Info:
MacBook Pro, Mac OS X (10.7.4), iTunes
I have a MacBook Pro- purchased in September of 2011- that has now stopped recognizing my WD Passport. The Passport works fine with my wife's PC laptop, but is not showing up on the MBP. The light on the Passport flashes, but that's all. It does not show up in the Finder and Time Machine is unable to perform backup.
I have first restarted the MBP and then shut down and then turned the MBP back on. Neither time did anything. I have an older SimpleTech external that it now recognizes again- after appearing not to. After multiple attempts and using both USB ports, sadly have gotten nowhere.
Info:MacBookPro, Mac OS X (10.7.3)
My MacBookPro was having a trouble opening some programs, now it's not recognizing the installation cd's but not having problems with the music ones. So I decided to just restore, erase it all and start all again. How to do that with no cd?
Info:
MacBook Pro, Mac OS X (10.6.8)
I can not get my macbook pro to read my flash drive to import photos, how can I get it to work?
View 4 Replies View RelatedI have upgraded to Yosemite from lion now mac wont recognize any usb drives?
View 1 Replies View RelatedI put my wedding CD of pictures in my mac, for some reason the mac is not recognizing there is any CD in and I am unable to eject it.
Info:
MacBook Pro (13-inch Mid 2012), iOS 7.1
I recently bought a used (early 2008) MBPro 15" 2.5 SR to do some video editing. Unfortunately it will not recognize my Sony DV camera, or an external HD connected via FW400 or my 12" PB booted in target disk mode. The camera and the hard drive both mount instantly on my 12" PB and a friends 15" PB. Also, when I check the Firewire status under System Profiler all it says is: Warning: Unable to list FireWire devices (in red). This is regardless of what is connected to the port or if nothing is connected to the port. I have tried rebooting the PRAM and changing the Firewire port's network preference to OFF as recommended by this post: [URL]
View 1 Replies View RelatedI have the latest model of the MacBook Air 13" (mid-2011 model). As recommended by the Apple Store rep, I bought the minidisplay to DVI adpater to connect my 20" Viewsonic VG2030wm. Unfortunately, the MacBook Air 13" is not recognising the monitor. It doesn't detect it at all.
I know the monitor and the DVI cable work because it works with my original MacBook Air (2008 model) that uses a micro-DVI to DVI adapter. My last resort is to take the new MacBook Air, the Viewsonic monitor, cables and adpaters to my local Apple Store to see if they can figure out it out. However, I won't be able to go until two days later when I have access to a car.
Info:
MacBook Air, Mac OS X (10.7.3), 13", 4GB RAM, 128GB Solid-state
Recently I have formatted my hard drive and had few problem with installing lion, so I removed it install it like external drive from another computer then put it back inside and now it's not working, doesn't even spin, but I can boot from usb on that drive and the computer work.
Info:
MacBook Pro, Mac OS X (10.7.4), unibody 2009
I have a 16 GB SDHC Card. I took pictures with it on my Nikon D5100 and now when I went to go look at the pictures on my camera, I got an error message that said this card is broken and that I need a new SD Card. Then I thought it was just a camera issue so I plugged it into my MacBook Pro but it didn't reconize it. Is there any way to get the data off of the SD card and how did this happen?
Info:MacBookPro, Mac OS X (10.7.2), Early 2011
My computer is not recognizing its internal speakers and has no sound. How do I get it to recognize?
Info:
MacBook Pro
When trying to connect to my home wireless network, my computer doesn't recognize my network, or any network as being accessed before. It doesn't remember any networks. I even went into the advanced settings and made sure to check the box that makes it remember networks, and it still doesn't remember them. I am able to connect to my home network manually, but it will not automatically connect when I open the lid after it being closed, or when I turn off the wifi and turn it back on.
Info:MacBookPro, Mac OS X (10.7.3)
I have a mbp with retina display and is not reading my rugged lacie external hd connected via the 2 usb ports. The lacie model that I have is the 500 gb one with the 2 firewire ports and one usb. When you connect it via usb you have to plug use 2 ports one for power the other for info. I'm trying that in the mbp retina and is not recognizing it. It doesn´t appear in the disk utility nor in the system info under the usb ports.
View 4 Replies View RelatedAfter installing new hard drive and transferring time machine data, my MacBook Pro is Refusing to recognise my password even after I have reset it using the startup disk. I enter user password on my admin user account and it goes blue briefly as if beginning load but the. Returns back to selecting user and entering password. It really strange as it does not say password incorrect its almost like it trying to load but can't.
View 1 Replies View RelatedI am the Apple guy at home. My older sister had our plastic macbook (with a incase purple cover on it) and spilt water on it. The battery was low too. So I connect the charger to it, and it doesn't recognize it. I took the case off, and checked it, but the innards are not wet, only the cover.
View 2 Replies View Related