PowerPC :: 12" G4 Not Recognizing Hard Drive
Mar 11, 2007
I have a 12" PowerBook G4 that stopped recognizing the factory hard-drive some time back. I have a G4 iBook so I was not in a hurry to look into it. I removed the old hard-drive and replaced it with a Scorpio drive of 60GB. It still fails to recognize the hard-drive. If I run the Apple Care diagnostics it hangs at the start-up while 'scanning for volume' or something like that. t hangs for 15-minutes or more and never moves past. The CD-RW drive is fine as I can boot the machine into the OSX installer up to the point where it asks for a destination...at which point nothing is selectable. It is a 867MHz G4 PowerBook with 768MG RAM. This is a fantastic notebook and I would hate to see it remain in this state. Does anyone have any ideas? I replaced the IDE cable and hard-drive with all new Mac OEM parts (except the HD) and reset the PRAM or PMU or what ever it is called...with no results.
View 5 Replies
ADVERTISEMENT
May 12, 2012
Recently I have formatted my hard drive and had few problem with installing lion, so I removed it install it like external drive from another computer then put it back inside and now it's not working, doesn't even spin, but I can boot from usb on that drive and the computer work.
Info:
MacBook Pro, Mac OS X (10.7.4), unibody 2009
View 1 Replies
View Related
Mar 24, 2012
Why doesn't my IMac recognize my new Seagate 2 Terabyte hard drive. I have rebooted and inserted the usb cable into several different ports.
Info:
iMac
View 4 Replies
View Related
Apr 18, 2012
I have a 2010 Mac Book Pro that I just downloaded the new OS X Lion for the upgrades ext... I haven't had any other problems except that before I downloaded the Lion my Mac would recognize my external hard drive (WD passport). And now it doesn't, I even go to the finder and it doesn't even show up under "computer" to make sure there isn't anything wrong with my external hard drive I plugged it into another mac that doesn't have Lion and it would work. My external drive has everything 1TG of everything.
Info:
MacBook Pro, Mac OS X (10.7)
View 2 Replies
View Related
Sep 9, 2009
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
View 7 Replies
View Related
Nov 22, 2006
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies
View Related
Apr 19, 2010
i just installed a new 2nd, (750 gb) hard drive into my g5 because my first 250gb is nearly full. I'm trying to launch logic but the file is way to big. It wont let me install this program from my new, second hard drive because the message i get is that it supposed to launch from the primary or running hard drive. Can anyone tell me how i can make my second hard drive my new primary hard drive? I got the .dmg for my leapord osx. but not the originals anymore. can anybody help me with this. i'm pretty sure it's simple, i just don't know how to do this.
View 5 Replies
View Related
Apr 6, 2008
I have an iMac G4 with a failed HD. I know this because it boots from my external drive. Does anyone know where I can find the Hard drive part # and a take-apart guide?
View 3 Replies
View Related
Jan 7, 2010
My friend gave me his old Apple cube G4 + 15" Cinema display in like 1000 pieces. Its completely teared apart. I tried a lot, but it doesn't work. The original IDE cable wasn't included, so I bought one for 2 cents. It should work or not? Maybe the powersupply. I'm not sure. I don't believe actually that the hardware itself, like the motherboard is broken. When everything is into place and I connect the cube to the powersupply it boots immediately. I don't have to do anything. Harddrive spins and the superdrive makes some noise as well. This repeats itself every 5 seconds. The screen is connected and gets power through DVI, but no display. Both the cube and display have touch enabled buttons to switch it on, but they do not respond (I guess).. Motherboard gives 2 light. DS1 is green, DS2 is red.
View 3 Replies
View Related
Apr 8, 2010
I want to put my old 15" PowerBook hard drive into an external case. I pulled the hard drive out of the PowerBook. And I purchased a NexStar CS 2.5" SATA to USB 2.0 external case. But the connections don't match. What do I need to do? Do I need to buy some sort of adaptor? Hard drive is a Hitachi 120GB 5400RPM (model # HTS541612J9AT00) 2.5" Sorry, these photos are blurry as hell. Picture of hard drive pins:
Pins are in the following configuration (1's represent pins):...............
View 8 Replies
View Related
Sep 1, 2008
I bought a powermac G4 from ebay awhile back but just recently got it up and running. So far i am liking it and decided i wanted more ram then the 384MB it was sent with. So i looked on ebay to find ram, i purchased this ram right here. [URL] I bought 3x512mb and none of the sticks are recognized in any of the 3 slots. I'm thinking the problem is that the ram is high density, can any give me their opinion on it. Also, with pc's there is a way to get to a bios screen, do macs have anything similar to that? Besides the boot selection screen? I forgot to mention, the mac i own is a powermac g4 single 533MHz cpu.
View 7 Replies
View Related
Dec 26, 2006
I've already RMA'd the first 1gb stick back to Crucial, and now I'm on the second. Sometimes the system boots, sometimes it hangs at a blank screen until I hold the power button down long enough to turn it off. But when I CAN actually get up and running, "About This Mac" reports that I only have the onboard 512mb. System Profiler says my singular expansion slot as empty! Yes, I've tried re-seating it-- many times. To no avail. I'm also positive the module is as far into the slot as it can go. And I find it hard to believe that Crucial would send me two faulty sticks in a row. Unfortunately, due to my built-in 512mb, I can't boot off the Crucial ram alone.
View 7 Replies
View Related
Jan 7, 2007
I pulled a 256mb stick out of the girlfriend's dead PC laptop and it fits in my 14" iBook G4 and when I originally put it in, "About this Mac" said I had 768mb, meaning it recognized the new RAM, now its about three weeks later and "About this Mac" says its 512mb again. So, I pulled the RAM out, put it back in, it recognized it for about a day and now its back to saying 512mb.I know when you buy RAM new, it comes with a CD(usually) to scan your computer, so is that the problem and if so, is there a download of the software online?
View 2 Replies
View Related
Sep 16, 2007
When I installed it, system profiler keeps saying it's 256. I have a 128 and 2 64's in there. In the 4th slot I put the 512. I tried just putting it in (to make just 512) and it still said.
What is weird is that when it only had the 512 stick in there, it seemed faster then with just the other 3 sticks. Is it just saying the wrong number?
View 4 Replies
View Related
May 15, 2008
I just replaced the original 20gb Toshiba HD in my 12" white G4 iBook (1.2gHz, 1.25gb RAM) with a new Western Digital 80gb Scorpio drive. No real issues with the swap, except the new harddrive apparently isn't being recognized. Don't see it in either the Disk Utility or System Profiler, but I can sure hear it spinning after power-up. I know it needs to be formatted, but how is that possible without being able to access it with the Disk Utility?
So, what's my next step? Anything I can try without taking the whole damn thing apart again and checking things with the old harddrive? BTW, only trouble with the old drive was its size. I've been running Leopard on it for several months.
View 3 Replies
View Related
Jul 2, 2009
I have two USB harddrives and neither of them are recognized by my G4. One of them consistently requires two ports for power, so I'm not surprised that one isn't working. However, my backup drive (a Verbatim) should not need that and it is supposedly compatible with USB 1.1 ports. It shows up on a Macbook. I am also quite sure that the ports themselves are working.
View 2 Replies
View Related
Aug 30, 2006
Well I have this problem on my iBook. At first I thought it was just my printer, but now I have it with my iPod. I plug anything in to the usb ports and it is connected by my ibook doesn't recognize anything I plugin. My iPod is sitting here on do not disconnect, but it doesn't show up on my desktop or in itunes. When I plug in my Epson printer and try to print, it wont connect to the printer, but the printer is on and the connection is good. They both work on any other computer in my house. I go into system profiler and when I click USB it just has the loading wheel going. That's all I get. The weird thing is that my mouse which is connected via the USB port does work.
View 1 Replies
View Related
Jul 19, 2010
I have an iBook G3 Dual USB with 256MB of RAM currently (128 on LB, and 128 in the user accessible slot under the keyboard). I bought a 512MB chip on eBay that meets the exact specs of the required RAM (512MB PC133 SDRAM SODIMM 3.3V) but when I insert it into the RAM slot and turn on the iBook, it says in About This Mac that I only have 128MB of RAM. what I can do, or is the chip possibly not compatible with Apple?
View 2 Replies
View Related
Dec 26, 2010
i purchased a power mac G5 recently which broke after 2 days- it was bought from ebay. i sent it back to the seller who "repaired" it. It arrived today in the post and didnt work i oppend it up to see the hard drive had crack during transport, and the conector pins where bent and unconectable.
I made a clone copy of my macbook that should be bootable using something called carbon copy cloner, i now want to boot my power mac g5 from the external usb hard drive. This just apears on the screen with a folder and a question mark flashing. What can i do or is this possible.
View 7 Replies
View Related
Aug 21, 2007
I'm in a little need of assistance with my PowerBook G4 Alum. 1.67GHz. The Hard Drive it came with got fried a little while back (alas, not in warranty) and I have been hesitant to try to repair it myself in the past. However, I now wish to resurrect my machine, seeing as how if I don't try this, I might as well just buy a new laptop. What sort of HD should I buy?
I know it has to be "ATA" but (1) I have no idea what that means, and (2) There seem to be many different types of HDs. I have no problem disassembling my PowerBook but I am lost when it comes to its hard drive. I think I would like to get a HD with 7200 rpm and 80-100 GB. Also, when do you see Apple releasing a MacBook with a good graphics card that isn't integrated?
View 13 Replies
View Related
Aug 24, 2007
My hard drive just failed in my 12" PowerBook G4 1.3Ghz. I wondering if any one can confirm whether this disc would fit/work [URL]
View 1 Replies
View Related
Jan 11, 2008
I have a 40gb drive and i want to get a bigger one? What will fit and work. Will this? [URL]
View 8 Replies
View Related
Apr 16, 2009
I have tried troubleshooting, searching this forum, & googling to no avail. I'm hoping someone smarter than me can figure this out.
Short Version:
Purchased this hard drive:
[URL]
and purchased this external enclosure:
[URL]
when I plug it into my macbook, PC, or a powerbook, the disk is not recgonized, I can not get Disk Utility to even recognize that the hard drive exists. I thought it may be a bad drive, so I sent it in to Seagate Warrenty, they sent me a new one and I'm still having the same problem. Does anyone know how I can format the drive or any way I can get it to be recognized?
Longer Version:
My powerbook crashed, so I purchased this HD to replace it. I installed the 1st seagate and when i went to install OSX and said select destination drive, there was none there to select. I was able to repair the original HD so I reinstalled it and went to install OSX and it DID show the drive to install it on, so I don't think that it is the computer/motherboard. Then I sent in for the 2nd seagate, tried getting it to work with the external enclosure and installing internally in the powerbook, etc. nothing seemed to work.
I am wanting to install the new drive in the powerbook as the old drive is on its last leg (but currently works). Every thread i have searched for that was similar, there was no solution that I could use.
View 13 Replies
View Related
Jun 20, 2009
I just need help trying to take out this darn hard drive. It won't come out. There are two hard drives in my G5 right now, I'm trying to pull both of them out. I tried to do the bottom one first, didn't work. Tried the top one, didn't work. I'm stumped, and I tried my hardest to take them out. I followed these instructions:
http://www.info.apple.com/usen/cip/pdf/g5/073-0851.pdf
View 12 Replies
View Related
Jun 24, 2010
I recently tried to switch drives to run the Operating System 10.4.6 on my 1st gen G5 1.8ghz. The new drive(160GBs) is smaller than the old system drive(1TB) so I ran a 3rd party app to clone what I thought was the important stuff onto the new drive; but not everything because it wouldn't all fit. I moved everything that looked like it wasn't just a dumb folder with my media files on it. It seemed like I moved everything important on the new drive.
When I swapped out the drives in the top bay and booted the computer, the new drive didnt boot the OS, instead it opened up a black screen that looked like some sort of terminal. I did something wrong and I cant figure out what. Does anyone have better steps to take? Its not the end of the world to start over, but if anyone knows what I did wrong that would be super information!
View 11 Replies
View Related
Oct 19, 2006
I have a iMac G5 with an Airport Extreme Card installed and an Airport Express Base Station. I have set a password on it and it is working fine on my G5.
I also have a G3 Clamshell iBook with OS 10.3 on it and an Airport card installed there. In my last home, it was able to connect to a default network without problem, but I have never been able to connect it to the same network as my G5. I enter the password and it says thet the password is not recognized. I have since moved into a new house and the only network that shows up is the one from my house (no default anymore and I can't get access to the internet.
I know the card is working since it picked up the default in my last place, but am wondering what I can do to get it to recognize the password. Should I reset the Airport Express. Do I need a more current version of OS X to run it than the OS 10.3 (I haven't updated the software as I just installed OS 10.3 from OS 10.2 last night and didn't have the connection to be able to do a software update - I could just plug it into the ethernet and do it if I need the update.
I don't want to leave it without a password. We are the only people right now in a new sub division but there will be people moving into the area soon that I don't want jacking my internet service.
View 1 Replies
View Related
Jan 23, 2007
I have a 366 G3 graphite iBook that was working fine in OS9 a few months ago. I took it out of the closet yesterday and installed 10.3. I did all the updates etc., and now the computer will not recognize the battery! There is a battery icon on top, but when the light is amber on the machine (charging) it says it is calculating how long it will take to charge. Once the light is green (charged) it says there is no battery. I take out the plug and the machine turns off. On top of that, the clock has to be reset everytime I unplug the machine. I don't get it, the battery was like new back in September - it would go for hours. Now it's like it's not even there!
View 6 Replies
View Related
Dec 6, 2007
Initially it would intermittently not recognize the RAM that was in the 2nd slot (not the on-board ram). Now it does not recognize the 2nd RAM slot at all. I know it's not the stick, as we've put different sticks in to test.
View 4 Replies
View Related
Feb 3, 2009
I have an snow iBook G3 that I use everyday as my machine for doing schoolwork etc., so it is a very critical machine. The battery doesn't hold a charge anymore, so I just plug it in. No big deal. However, just a few hours ago the iBook started to not recognize it was plugged in. The prong has always been bent a bit, I think, and it always worked (before MagSafe type). The charger is beat up at the cord going into the power brick from the wall outlet, but it has always worked too and it seems to be a problem with the prong going into the computer. I have to hold it a very certain way for it to even detect power. So, the machine has NO way to get any power. I was thinking about taking it in to the Apple store to see if they could still get me a non-magsafe charger, but what if its something different then the charger?
The specs are as follows:
12 inch iBook
PowerPC G3
500 mhz
128 gb RAM
I have a Vista laptop I can use until its fixed, but I'd rather not use Windows. No speical prgrams or anything, I just really like Mac OSX. I have files on the iBook, too.
View 10 Replies
View Related
Jun 16, 2009
I used this iPod (new) previously on my husbands PC. I recently purchased a refurbished iBook G4 and it works great with the exception of not recognizing my iPod! When I plug it in, it give me the error message: Disc Insertion - The disc you inserted was not readable by this computer. What does this mean? It has been a while since I've used a mac. I've tried restarting my iPod both off and on the mac with no change. I'm worried I'll lose all my music. Have also tried repairing and verifying with no results.
View 1 Replies
View Related
