I have a multicam clip and when I open it in the Angle Editor, I can't move any of the clips. They just snap back to where they were. For whatever reason, FCP X really fudged up the "auto" syncing of these clips and I have to move them around and sync manually.
What's the secret? I can press , and . to nudge left and right but grabbing them and dragging them down the timeline isn't working.
After transferring my projects, and then events (separately) to my external hard drive, everything worked after relinking media except for all of my compound clips and multicam clips.
I do not know where to locate them in Finder, nor how to get them back. When I tried transferring my events and projects back to my internal hard drive, they still were not there.
Everything was fine before with Final Cut Pro X (Version 10.0.8) but now it is seriously hindering my work.
I have been editing compound clips and when I get half way through i notice early clips in the timeline are missing. So if there is clips ABCD in a connected clip, it will be now AC and the other clips are now gone. I've pressed undo until i saw when they were deleted and it seems when i'm selecting clips later in the timeline it selects earlier clips and deletes them with the clips i want to delete. This is causing a major headache as it seems to be random, I can't replicate it on demand, but it happens eventually in ever compound clip I create. I haven't noticed it while editing a project.
View 2 Replies View RelatedI am able to create a multicam clip, and when I double click it it drops to the timeline & appears in my Angles viewer. However, when I hover my mouse over the 3 different angles it doesn't change to the blade, nor does clicking the clips themselves seem to make any cuts. In short, I have a multicam clip that I can set up but cannot edit. Have the Pro Manuals & watched many how to videos but I cannot tell what I'm doing differently.
View 5 Replies View RelatedCan I import clips to FCP X at 180 degrees rather than flipping the clips individually once they are imported? I have about 300 clips all recorded upside down and i am looking for an easy solution.
View 1 Replies View RelatedI edited a multicam project that had three AVCHD clips as the source. The footage was optimized (although I never chose to do it –Final Cut did it on its own). The project is done now I want to send the Library overseas. I'd like to just put it on a thumb drive rather than have to buy and ship a hard drive. What happens if I delete the optimized media? Is there a way to switch it so FCPX plays back the original media, not the transcoded, and I'll let the next editor decide whether she wants to optimize?
Info:
iMac, OS X Yosemite (10.10), FCPX
I've been trying to to export my Audio from FCPX 10.1.3 as Separate Files (per Roles) from a Multicam clip but it stops and freezes after exporting the first Audio track listed in the export setting. Example:
I have a Multicam clip with 3 Audio Roles (Bob, John and Marc, all assigned to their Audio Roles).When i export Audio as Roles (separate files), i then select all the Roles i want to export: Marc + John + Bob. It will export up to 35% or so and freeze.Then i look in the Finder location of the export to see the audio of Marc only.
If i put John + Marc + Bob, i will see the Audio for John only and so on.If (i have to at this point) i cancel the export, the audio file gets deleted and i get nothing out of FCP. Is there a way to export Audio as Separate Roles file from a Multicam clip or do i need to add all the Audio clip separately from the Multicam on the Timeline?
I'm adding the audio in the Multicam clip so that, if i want to remove a chunk of video from the timeline, The audio attached to it will also be removed and everything stays sync'ed after the cut i made.
I tried Detaching the Audio from the Main Timeline. I then get the Audio but still in a "multi cam" bundle. When i select that and look in the Inspector, i see all the Roles but i can't Export like i want to.
Info:
OS X Mavericks (10.9.4), Final Cut Pro X (10.1.3)
I'm looking for a simple free video editor. I need to crop a video.
View 3 Replies View RelatedI currently use iMovie version 6 to put low pixel rate (e.g. 480 x 360) clips together. I was wondering if FCP or some other app is much faster. I don't do much editing. Mostly just assemble chunks and render them into movies.
View 2 Replies View RelatedIn FCP 7 you could right click and choose 'Close Gap' or something very similar. What's the short cut for closing the gap between two clips, rather than manually dragging each one?
Info:
Final Cut Pro X, OS X Mountain Lion (10.8.2)
I'm working on a large edit with footage imported into FCPX from a SonyXDcam. Three clips have audio that is out of sync. The others are all fine. What happened to those three and how do I fix it?
Info:
iMac, OS X Mavericks (10.9.2)
Is there any way to synchronize clips from the timeline? I understand that there is a way to synchronize from the Project Library but it makes more sense for me to sync from the timeline. If there just isn't a way to sync from timeline, is there a way to put all the clips from the timeline into the Project Library so I can do it there?
I have been using pluralize but wanted to see if I can skip all those extra steps of exporting and importing.I also wanted to see how effective the sync feature is in FCPX 10.1.2
I updated everything to FCPX 10.1.1.
Some clips became unlinked. I go to link them ... and am stopped dead by the NEW Library Icon (with all it's internal folders no longer seemingly accessible). I know the file is in there - if I do a search in Finder for the missing media, it takes me right to where it is.
When I do a relink, stopped dead in my tracks by the new format. How do I access the folders hidden in the new Project Library to relink my clips with their original media?
Info:
MacBook Pro (15-inch Glossy), Mac OS X (10.6.8)
I was editing in FCPX and all of a sudden a few clips in my timeline went black. What I mean by that is when I played them back, they were completely black. It was like the footage had gone missing. You name it, I tried all of the obvious things to do from here on in; I replaced and re-timed the footage with a fresh I/O grab from the clips panel. I tried reimporting the clip. I tried re-linking to the source file. I tried re-creating optimised media. Nothing worked. The only thing that worked was transcoding the footage in a different problem with a different filename and then reimporting and then replacing that with the black clip.
View 6 Replies View RelatedClips are shot with 25p. Due to neon lights there is flicker in bright areas. How can I reduce that?
Info:
Final Cut Pro X
Is there an easy way to simple delete all filters from a selection of clips?
If I select multiple clips and then delete the filter, it only deletes it from the one single clip where the playhead is, the others are untouched.
If I make a cog standard clip, and then copy those attributes and paste it to the other clips as suggested it doesn't 'reset' those it merely dumps more filters on top or leaves the current ones untouched?
Do I really have to go in and select and delete one single filter off every single clip? There's a bunch of about 65 still frames I need to do this from and I can't bear the though of that.
Info:
iMac (27-inch, Late 2012), OS X Mountain Lion (10.8.2)
How to view two clips at the same time with 50 % transparent each (end of one clip and the starting of the next clip in time line) so that one overlapping the other, both can be seen. This is to merge two clips, so that I can stop at the correct frame of the first clip and start at the appropriate frame of the next clip.
View 1 Replies View Related3 days ago I opened FCE to work on some video, and every single captured clip in any project I open simply appears as a gray screen with no audio or image. All clip info like names, in/out markers, etc is still there. I have not had any problems in the past couple years with the program, and have not made any changes to it or my computer recently.
View 2 Replies View RelatedDespite preference trashes and restarts and permission repairs and pram zaps I cannot get rid of this issue:
Every time I relaunch FCP there is a series of 12 clips in my project--same 12 clips--that show up in the browser with the dreaded red window telling me "camera missing." For some reason Relink Files isn't working but was does work is just opening the Import window and navigate to where the parent files are and, magically, the thumbnails for those clips start to appear in the browser again. I don't even have to tell it to do anything. They just relink.
Info:
iMac, OS X Mavericks (10.9.4), APERTURE 3.5.1, FCPX 10.1.3
I have a Mac Pro, 2 x 2.66 GHZ 6-Core Intel Xeon machine with 24 GB of 1333 MHZ DDR3 memory.
I have both miniDV videotapes recorded on camcorders as well as on JVC recorder. I also have S-VHS videotapes recorded on the JVC recorder (which is a dual recorder, with the miniDV deck on the left and S-VHS deck on the right)
Whenever I try to import video from either deck (or from a Canon Elura camcorder) into FCP X, I get thousands of separate clips ranging from a few tenths of a second in length to 20 seconds or so in length. When these clips are loaded into the timeline, there is a video and audio stutter whenever the playback cursor crosses between adjacent clips, indicating that a frame or two or more has been dropped. Making a compound clip is no luck, the stuttering due to dropped frames persists. This makes it completely impossible to edit since no clip is long enough to be usable.
The dropped frames seem to be due to the program, not the cameras, tape deck or videotapes since the problem occurs across all camera platforms as well as the two videotape formats. It's as if FCP X has a hair trigger in identifying some variance in frame rates that it judges to be a dropped frame, and immediately terminates the import of that little clip and goes on to the next import, only to repeat the same process THOUSANDS OF TIMES. The problem persists whether I record imports to my SSD startup disk, to my internal RAID, or to peripheral disks.
This did not happen in previous versions of FCP using the exact same video equipment and tape formats but a different computer. There seems to be no way to tell FCP X to ignore any variation of time code and I'm concerned that this problem will render my current equipment and videotapes worthless.
I have old large projects with a lot of b roll I will not use again and want to delete each unused clip. What is the best way to delete these safely. I can go into the library, show package contents and delete the clips there, but will that upset the library. And is there a way to delete just the parts of the clips that are unused? So If I have a 30s clip, have used 5s and want to delete the rest of the clip around the 5s, is that possible? Trying to recover some drive space to save buying a new media drive....
View 6 Replies View RelatedI have a major problem with FCP 10. I cannot for the life of me figure out how to do a simple audio level adjustment using the keyframe editor. I have a audio-video clip that is using dual channel mono audio. I have a shotgun mic on one channel and a handheld mic on the other.
I've gotten as far as getting both incoming channels to playback on both outgoing channels. What I need to do is to shut off one channel or the other, periodically, in order to preserve the quality of the audio. FCP won't let me use keyframes and the range editor wasn't work either. It should be simple but it seems that it isn't. What do I have to do to cause FCP to do this very simple operation?
At my job I was given a new computer with an updated version of Final Cut Pro (FCP 10.1 - my old computer has FCP 10.0.7 installed). I tried moving my fcp events from my old computer to my new computer via an external drive.
The events did not show up in the fcp software on my new computer after plugging in my external drive.
I plugged my external drive back into my old computer. The events showed up but I could not locate any of the projects associated with those events.
Aren't projects stored inside events? How can I locate these projects so I can move them to my new computer?
I can import only selected portions of video clips from my iPhone5. At present I have to import the full length of the video clip into the event and in so doing, I am unable to 'weed' out unrequired segments. Is editing the video clip in the iPhone itself the only option one has or is there any other way of doing it during the import process itself?
Info:
iMac, OS X Mavericks (10.9), garage band, FCPX:10.0.9 version
I have a project where I have applied a vignette to multiple clips(70+) in the timeline. When I added the effect I first applied it to a single clip, adjusted some of the parameters until I was happy and then copied and pasted the effect onto all the clips.
I was happy until I came back to the project and didn't like the amount of vignette I used. how to adjust the vignette on all clips at once? If I adjust the vignette on one of the clips, copy and then paste attributes it pastes the whole effect onto the rest of the clips and 'doubles' the effect as it where. I just want to paste the adjustment I have made.
Info:
Final Cut Pro X, iOS 7.0.4, 2013 iMac 27-Inch
I have 12x3 minute music videos (about 300 mb. each) which I want to burn onto one DVD.
I am unsure of the correct method. I have tried using Toast but it didn't work.
The 12 videos have all been exported using Quicktime conversion and were shot in HDV
I need to strip the audio off of a few ProRes files with the end product being ProRes files; easy enough to do but don't want to degrade the quality of the original video (via any compression etc). If I just hit File/Share/Master File with the video-without-audio on the timeline, otherwise untouched, will it create an original-quality ProRes file essentially the original video without the audio?
View 2 Replies View Relatedafter color balancing a clip I get a flickering border on top and bottom of my clips, visible in timeline and also after rendering. It's easy to see in this clip (starts around 15 seconds in): URL....
If I remove the color balance it will go away. I wonder if it has to do with the source clip being in 1080i instead of p. The preceding clip is also color balanced but is in 1080p. It's less noticeable but sometimes still there when other color correction is invoked. I'm using a late 2013 Haswell 27 in iMac with 8gb ram.
Info:
iMac (27-inch, Late 2013), OS X Mavericks (10.9.4)
Failures to import movie clips from Sony AX100 4K camcorder into FCP10.1.1 or iMovie 10.0.3. Clips are not recognized or rejected by either program.
Same problem with several downloaded "XAVCHD to ProRes 4.2.2" conversion programs and Sony's "playmemories home" Seems to me that the file names are suspect to internal Mac firewalls?
My computer: iMac 27 late 2012, OS X 10.9.3, 3.4 GHz Intel Core 17, FCP10.1 and iMovie 10.0.3
How to get xavchd files straight or converted to ProRes 4.2.2 into FCP or converted to AICinto iMovie?
Info:
Final Cut Pro X, OS X Mavericks (10.9.3)
Doing a sound mix. Lots of tracks.
Talking about wild audio tracks not directly related to video clips.
I find I want to attach a particular audio clip to a different video clip (given that without tracks it has to be attached to SOMETHING). Is there a way to move an audio clips affiliation to an alternate video clip? Especially without having to drag it out of place to do so?
Which leads to another question: is there any way to freeze an audio clip in place?
Info:
MacBook Pro (15-inch Glossy), Mac OS X (10.6.8)
